---
title: "Schneider Electric CL-60E Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "Schneider Electric CL-60E 66 kW grid-tie inverter. Specs: 98.5% European efficiency, 1 MPPT, 1000 V max DC input, 66.0 kg."
source: "https://comparepv.com/inverter/schneider-electric-cl-60e"
updated: 2026-11-14
---

# Schneider Electric CL-60E


## Identity

- **Manufacturer:** Schneider Electric
- **Model:** CL-60E
- **Series:** Conext CL-60
- **Rated AC power:** 66 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.5% | 98.2% | Strong - top 6% | 12 |
| MPPT trackers | 1 | 4 | Weak - bottom 2% | 265 |
| Max DC input voltage | 1000 V | 1100 V | Typical | 298 |
| Weight per kW | 1.0 | 1.2 | Typical | 181 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 66 kW
- **Max apparent power:** 66.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 96.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 lead to 0.8 lag adjustable
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 570 to 850 V
- **Start-up voltage:** 620 V
- **MPPT trackers:** 1
- **Max input current per MPPT:** 120.0 A
- **Max short-circuit current per MPPT:** 140.0 A


### Efficiency

- **European efficiency:** 98.5 %
- **Max efficiency:** 98.7 %


### Physical

- **Dimensions:** 958 × 652 × 250 mm
- **Weight:** 66.0 kg
- **Enclosure:** IP65
- **Noise:** 55 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Ethernet, Display
- **Protocols:** RS485-Modbus, Modbus-TCP, SunSpec
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1,2,14,30, EN 60529, FCC Class B, UL 1741-2nd edition, CSA C22.2 107.1, UL1699B, VDE-0126-1-1, UTE C15-712-1, VDE-AR-N 4105, BDEW, IEC 61727, IEC 62116, G59/3, PEA, MEA, IEEE 1547, IEEE 1547.1, RoHS, REACH


### Pros

- **98.7% peak efficiency** - Both the CL-60E and CL-60A variants reach 98.7% peak efficiency (98.5% Euro efficiency for the E model, 98.0% CEC efficiency for the A model), placing the series in the upper tier of commercial 60 kW-class string inverters at its 2016 launch.
- **Sub-1W night-time consumption** - The manufacturer's datasheet lists night-mode power draw below 1 W, which practically eliminates self-consumption during non-production hours and reduces operating costs on utility-scale sites.
- **Native WYE and DELTA support** - The inverter natively supports 4-wire grounded WYE and ungrounded DELTA AC connections, allowing it to interface with different commercial grid infrastructures without additional transformers or adapters.
- **Mounting flexibility from vertical to flat** - The unit can be mounted anywhere from vertical wall mounting to fully flat (0°), easing installation on unconventional racking and flat industrial rooftops.
- **Remote monitoring via Modbus** - The series supports Modbus RTU and Modbus/TCP-IP alongside dedicated EasyConfig software, simplifying fleet management of inverters across large commercial sites.


### Cons

- **Discontinued, limited servicing** - The Conext CL-60 series (both CL-60A and CL-60E) is officially listed as discontinued on Schneider Electric's EU and US sites. This means no new units are produced, spare parts availability is shrinking, and existing 2016-era installations face growing risk of extended service lead times.
- **Power derating above 3000 m altitude** - Maximum operating altitude is rated at 4000 m, but the manufacturer requires power derating above 3000 m, which may limit suitability for high-altitude projects without additional loss analysis.


## About this series

The Conext CL-60 is a **three-phase string inverter** from Schneider Electric, built for large-scale commercial and industrial installations - from warehouses and manufacturing plants to rooftop solar arrays on sizeable commercial buildings. The series addresses a common challenge for commercial investors: balancing high energy yield with straightforward installation across varied site conditions. The unit stands out for its **flexible mounting** capability, supporting orientations from vertical wall mounts to flat installations, which simplifies adaptation to unconventional racking structures and flat roofs. A key advantage is **support for both WYE and DELTA grid configurations**, allowing the inverter to connect to different electrical infrastructures without extra adapters. The Conext CL-60 also features **minimal nighttime power consumption**, translating into real savings over the system's operating lifetime. With its dedicated EasyConfig commissioning software and remote monitoring capabilities, managing fleets of inverters across large sites becomes significantly easier. This is a solution for integrators and investors seeking proven, industrial-grade technology that guarantees **stable operation in demanding outdoor conditions** along with low servicing costs over the long term.


## Questions


### Is the Conext CL-60 inverter still available for purchase?

No, Schneider Electric has discontinued the Conext CL-60 series and it is no longer sold as a new product. Availability is now limited to remaining distributor stock and the secondary market. For existing installations, it's worth securing access to spare parts and technical support before the manufacturer phases out after-sales service entirely.


### Can the Conext CL-60 be connected to the grid in both WYE and DELTA configurations?

Yes, the inverter supports a four-wire AC connection operating as either a grounded WYE or an ungrounded DELTA network, depending on the model: E (IEC) or A (UL). This means the unit can be installed on different electrical systems without extra transformers or adapters, which greatly simplifies integration into existing commercial building infrastructure.


### How flexible is the mounting of the Conext CL-60 on flat roofs?

The Conext CL-60 can be mounted anywhere from fully vertical to fully flat, which sets it apart from inverters requiring a fixed orientation. This flexibility is useful on industrial and warehouse roofs with non-standard support structures. The enclosure carries an IP65 rating, so the unit handles outdoor mounting in variable weather conditions well.


### How much power does the Conext CL-60 draw at night when it's not producing energy?

Night-time consumption is below 1 W, which translates into real, measurable annual savings across large commercial installations running many inverters. The unit's peak efficiency reaches 98.7 percent, so only a small fraction of energy is lost during normal daytime operation as well.


### What is the power rating of the Conext CL-60 and what installations is it suited for?

The Conext CL-60 is a 60 kW class inverter rated at 66 kVA for the E version and 63.4 kVA for the A version, designed for commercial and industrial installations such as rooftop PV farms on large warehouses and production facilities. This power class suits large string systems where both energy yield and low long-term operating costs matter.


### What is EasyConfig software and how does it simplify managing a fleet of inverters?

EasyConfig is Schneider Electric's dedicated configuration software that lets integrators quickly set up operating parameters and remotely monitor inverter status. On installations with multiple Conext CL-60 units at a single site, it significantly cuts commissioning time and simplifies ongoing service, since it doesn't require physical access to each unit individually.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/DS20190605-Conext-CL-60-1b8e6da4d48e.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [INVT XG66KTRL](https://comparepv.com/inverter/invt-xg66ktrl) | 66 kW | 98.5% | 4 | 50.0 kg | +3 MPPT, 16.0 kg lighter |
| [Growatt MAC 66KTL3-X MV](https://comparepv.com/inverter/growatt-mac-66ktl3-x-mv) | 66 kW |  | 3 | 52.0 kg | +2 MPPT, 14.0 kg lighter |
| [SolarEdge SE66.6K (K66.6SE)](https://comparepv.com/inverter/solaredge-solaredge-se66-6k-k66-6se) | 66.6 kW | 98.0% |  |  | +0.6 kW, -0.5 pp efficiency |
| [SolarEdge SE66.6K (K66.6SE) - Primary unit](https://comparepv.com/inverter/solaredge-solaredge-se66-6k-k66-6se-primary-unit) | 66.6 kW | 98.0% |  | 48.0 kg | +0.6 kW, -0.5 pp efficiency, 18.0 kg lighter |
| [SolarEdge SE66.6K (K66.6SE) - Secondary unit](https://comparepv.com/inverter/solaredge-solaredge-se66-6k-k66-6se-secondary-unit) | 66.6 kW | 98.0% |  | 45.0 kg | +0.6 kW, -0.5 pp efficiency, 21.0 kg lighter |
| [SolarEdge SE66.6K (Synergy, 277/480V)](https://comparepv.com/inverter/solaredge-solaredge-se66-6k-synergy-277-480v) | 66.6 kW | 98.0% |  |  | +0.6 kW, -0.5 pp efficiency |
| [SolarEdge SE66.6K (Synergy) – secondary unit (physical)](https://comparepv.com/inverter/solaredge-solaredge-se66-6k-synergy-secondary-unit-physical) | 66.6 kW | 98.0% |  | 45.0 kg | +0.6 kW, -0.5 pp efficiency, 21.0 kg lighter |
| [SolarEdge SE66.6K (400V grid)](https://comparepv.com/inverter/solaredge-se66-6k-400v-grid) | 66.6 kW | 98.0% |  |  | +0.6 kW, -0.5 pp efficiency |


---

Source: https://comparepv.com/inverter/schneider-electric-cl-60e

