---
title: "Polycab PSIS-1K0 Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "Polycab PSIS-1K0 1 kW grid-tie inverter. Specs: 93.0% European efficiency, 1 MPPT, 550 V max DC input, 4.4 kg, 8 yrs warranty."
source: "https://comparepv.com/inverter/polycab-psis-1k0"
updated: 2026-11-14
---

# Polycab PSIS-1K0


## Identity

- **Manufacturer:** Polycab
- **Model:** PSIS-1K0
- **Series:** PSIS
- **Rated AC power:** 1 kW
- **Type:** Grid-tie
- **Phases:** Single-phase


## How it compares

Compared against 449 inverters up to 3 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 93.0% | 96.9% | Weak - bottom 1% | 273 |
| MPPT trackers | 1 | 1 | Typical | 119 |
| Max DC input voltage | 550 V | 550 V | Typical | 125 |
| Weight per kW | 4.4 | 5.5 | Typical | 171 |
| Warranty | 8 yrs | 5 yrs | Strong - top 24% | 26 |


## Specification


### AC output

- **Rated AC power:** 1 kW
- **Max AC power:** 1.10 kW
- **Max apparent power:** 1.10 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 5.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading - 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 550 V
- **MPPT voltage range:** 40 to 540 V
- **Start-up voltage:** 50 V
- **MPPT trackers:** 1
- **Max input current per MPPT:** 20.0 A
- **Max short-circuit current per MPPT:** 30.0 A


### Efficiency

- **European efficiency:** 93.0 %
- **Max efficiency:** 96.5 %


### Physical

- **Dimensions:** 256 × 271 × 135 mm
- **Weight:** 4.4 kg
- **Enclosure:** IP66
- **Cooling:** natural
- **Noise:** 30 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet, Display
- **Protocols:** Wi-Fi, LAN, 4G, USB
- **Protection:** DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 8 years
- **Certifications:** IEC62109-1, IEC62109-2, IEC61000, IEC61727, IEC62116, IEC60068, IEC61683


### Pros

- **IP66 enclosure for outdoor mounting** - The IP66 ingress protection rating allows direct facade or open-area installation without extra shielding, reducing installation costs compared to IP65 units that require a shaded mounting location.
- **Compatible with high-power TOPCon modules** - The PSIS series supports high-voltage strings of N-type TOPCon modules (DC input voltage up to 500-550V depending on variant), enabling higher power-density systems without needing a different inverter during a module upgrade.
- **Transformerless topology, fanless cooling** - Convection-based cooling without a fan eliminates a wearing mechanical part and reduces operating noise, which matters when mounting near bedroom windows or terraces in single-family homes.
- **Built-in Wi-Fi and remote configuration** - Integrated Wi-Fi enables commissioning and firmware updates via a mobile app without an extra communication dongle, shortening installer service time compared to models requiring an external module.
- **Polycab's scale: 6+ GW in inverter shipments** - Polycab reports surpassing 6 GW in cumulative inverter shipments and over 1.1 million units delivered, indicating manufacturing maturity and service support availability for the PSIS series in the market.


### Cons

- **Single MPPT limits flexibility** - The single-tracker MPPT design works well on simple, single-plane roofs, but it cannot independently optimize two strings with different orientation or shading - in such cases competing 2-MPPT models (e.g., Growatt MIN, Sofar) deliver higher real-world yield.
- **8-year warranty below premium segment** - The standard 8-year warranty is shorter than some tier-1 competitors in the residential segment (e.g., Huawei, Growatt, Sofar typically offer 10-12 years standard or after registration), which may affect total-cost-of-ownership decisions over a 20-25-year PV system lifetime.


## About this series

The Polycab PSIS series is a lineup of single-phase, single-MPPT grid-tie inverters built for small and mid-sized rooftop installations on single-family homes. It addresses a common challenge in residential PV, that of combining a compact footprint with resilience against harsh outdoor conditions - an enclosure rated at **IP66 protection** shields the electronics from moisture and dust regardless of mounting location. The series stands out for its **compatibility with high-power TOPCon modules**, meaning installers are not locked into older cell technologies and can design systems with higher power density on the same roof area. Its **transformer-less topology** translates into lower energy losses, quieter operation and natural cooling without a fan, which matters when the unit is mounted close to windows or terraces. Installers and investors will also value the **built-in Wi-Fi**, enabling fast app-based commissioning along with remote configuration and firmware updates that cut down on service time. The whole lineup is backed by an **8-year warranty**, reinforcing confidence in long-term reliability for home PV systems. It is a fitting choice for customers seeking a straightforward, trouble-free entry-level inverter for a PV installation, without unnecessary industrial-grade complexity.


## Questions


### What is the warranty on Polycab PSIS inverters?

The Polycab PSIS series comes with an 8-year manufacturer warranty. This is a standard period for residential-class grid-tied inverters and means that in case of electronic failure during the first years of use, repair or replacement is covered by the manufacturer. For homeowners, this provides real financial protection for an installation expected to run alongside the panels for 20-25 years.


### Can the Polycab PSIS inverter be installed near windows or a patio without noise issues?

Yes. PSIS uses a transformerless topology, enabling natural convection cooling without a fan. In practice, the unit operates almost silently, making it well suited for locations where noise would be a concern, such as a facade near a bedroom, patio, or living room window.


### Is the Polycab PSIS inverter compatible with TOPCon panels?

Yes, PSIS is fully compatible with high-power TOPCon modules. This means installers are not limited to older cell technologies like PERC and can build systems with higher power density on the same roof area, which matters for small and medium residential installations with limited mounting surface.


### Can the PSIS inverter be mounted outdoors, for example on a facade exposed to rain?

Yes, the enclosure has an IP66 protection rating, meaning full dust-tightness and resistance to powerful water jets from any direction. The inverter can be safely mounted on an exterior wall of the house without needing an additional canopy or rain shield.


### How do you set up the Polycab PSIS inverter, and does it require a wired network connection?

PSIS has built-in Wi-Fi, so initial setup and monitoring are done through a mobile app without needing to run a network cable to the inverter. Remote access also lets installers push firmware updates and diagnose faults without an on-site visit, reducing service time.


### How does the Polycab PSIS inverter differ from models with two MPPT trackers?

PSIS is a single-phase design with one MPPT tracker, meaning the entire array must be wired as a single string with uniform orientation and shading. This makes it simpler and cheaper than inverters with two or more MPPT trackers, well suited to small, uniform roof sections on single-family homes, but less flexible on roofs with multiple pitch angles.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/polycab_inverter_1ph_1kw-4kw_v4-29a07a5e78ce.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Solplanet ASW1000-S-G2](https://comparepv.com/inverter/solplanet-asw1000-s-g2) | 1 kW | 97.1% | 1 | 9.5 kg | +4.1 pp efficiency, 5.1 kg heavier |
| [INVT XG1KTL-S](https://comparepv.com/inverter/invt-xg1ktl-s) | 1 kW | 97.0% | 1 | 6.0 kg | +4.0 pp efficiency, 1.6 kg heavier |
| [Deye SUN-1K-G04P1-EU-AM1](https://comparepv.com/inverter/deye-sun-1k-g04p1-eu-am1) | 1 kW | 96.9% | 1 | 5.6 kg | +3.9 pp efficiency, 1.2 kg heavier |
| [Deye SUN-1K-G05P1-EU-CM1](https://comparepv.com/inverter/deye-sun-1k-g05p1-eu-cm1) | 1 kW | 96.9% | 1 | 5.7 kg | +3.9 pp efficiency, 1.3 kg heavier |
| [Afore HNS1000TL-1](https://comparepv.com/inverter/afore-hns1000tl-1) | 1 kW | 96.6% | 1 | 6.0 kg | +3.6 pp efficiency, 1.6 kg heavier |
| [Growatt 1000-S](https://comparepv.com/inverter/growatt-growatt-1000-s) | 1 kW | 96.5% | 1 | 6.4 kg | +3.5 pp efficiency, 2.0 kg heavier |
| [Growatt MIC 1000TL-X](https://comparepv.com/inverter/growatt-mic-1000tl-x) | 1 kW | 96.5% | 1 | 6.0 kg | +3.5 pp efficiency, 1.6 kg heavier |
| [Growatt MIC 1000TL-X2 (Pro)](https://comparepv.com/inverter/growatt-mic-1000tl-x2-pro) | 1 kW | 96.5% | 1 | 6.0 kg | +3.5 pp efficiency, 1.6 kg heavier |


---

Source: https://comparepv.com/inverter/polycab-psis-1k0

