---
title: "NEP-75KW Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "NEP-75KW 75 kW grid-tie inverter. Specs: 1000 V max DC input, 85.0 kg."
source: "https://comparepv.com/inverter/nep-nep-75kw"
updated: 2026-11-14
---

# NEP-75KW


## Identity

- **Manufacturer:** NEP
- **Model:** NEP-75KW
- **Series:** NEPTUNE
- **Rated AC power:** 75 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 98.2% |  |  |
| MPPT trackers | - | 4 |  |  |
| Max DC input voltage | 1000 V | 1100 V | Typical | 298 |
| Weight per kW | 1.1 | 1.2 | Typical | 253 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 75 kW
- **Max apparent power:** 75.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 480 V
- **Max AC current:** 90.2 A
- **Grid frequency:** 60 Hz
- **Power factor:** .8 leading - .8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 180 to 1000 V
- **Start-up voltage:** 195 V
- **Max input current per MPPT:** 26.0 A
- **Max short-circuit current per MPPT:** 40.0 A


### Efficiency

- **Max efficiency:** 98.8 %
- **CEC efficiency:** 98.3 %


### Physical

- **Dimensions:** 567 × 1065 × 344 mm
- **Weight:** 85.0 kg
- **Enclosure:** Type 4X
- **Cooling:** forced-air
- **Operating temperature:** -30 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet, Display
- **Protocols:** Modbus RTU, RS485, Ethernet, Cellular, Wi-Fi
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** UL1741SB, UL1741SA, IEEE 1547-2018, UL1699B, UL1998, FCC Part15 ClassB, California Rule 21, HECO Rule 14H, NEC 690.12-2020, CAN-CSA C22.2107.1-1


### Pros

- **Integrated RSD transmitter** - The NEPTUNE series includes a built-in Rapid Shutdown transmitter compliant with NEC 690.12 - installers don't need to purchase a separate RSD module, cutting install time and lowering BoS cost compared to inverters requiring an external transmitter.
- **String-level diagnostics and I-V curve scan** - Built-in per-string monitoring plus I-V curve scanning lets operators remotely detect shading, soiling, or a faulty module without sending a service crew onto the roof, meaningfully cutting O&M costs on large commercial rooftop installations.
- **High efficiency and flexible DC/AC ratio** - The datasheet for the 33-50kW models lists a 98.8% max efficiency and 98.3% CEC efficiency, with a DC/AC oversizing ratio of up to 150% - allowing designers to oversize PV arrays relative to inverter AC capacity without voiding warranty.
- **Type 4X / C5 enclosure and AFCI support** - A Type 4X / C5 corrosion-resistance rating combined with built-in AFCI arc-fault protection (aligned with safety codes used in commercial installations) makes the inverter rugged in harsh weather, including coastal zones, without needing an extra protective enclosure.
- **PID recovery and aluminum conductor support** - Built-in PID recovery restores output from modules degraded by potential-induced degradation with no extra hardware, and support for aluminum conductors (not just copper) lowers wiring costs on large-scale commercial installations.


### Cons

- **Built for the North American market** - Available NEPTUNE models (e.g. 30kW/208 VAC, 33-100kW/480 VAC) are engineered for US grid standards and NEC/UL certification, not for the European 230/400V grid - there is no official EU/Poland distribution or CE certification, which effectively rules out use in local installations.
- **Base warranty shorter than segment leaders** - The manufacturer offers a 12-year base warranty, shorter than the standard at many tier-1 commercial inverter makers (e.g., Huawei, Sungrow), where base coverage runs 10-20 years with extensions up to 20-25 years - this can raise long-term service costs for commercial investors.


## About this series

The NEP NEPTUNE series consists of commercial-grade three-phase inverters built for rooftop installations on industrial and business properties, where reliability and ease of service matter most. What sets this line apart is its **integrated rapid shutdown (RSD) transmitter**, so installers don't need to source separate compliance modules for fire-safety codes - a real savings in both design time and cost. NEPTUNE also features **intelligent string monitoring and I-V curve scanning**, allowing quick detection of shading, soiling, or module faults without dispatching a service crew to the roof. Another advantage is the **built-in PID recovery function**, which restores performance to cells weakened by potential-induced degradation, alongside **built-in AFCI protection** that meets US safety standards. The enclosure's **corrosion-resistant 4X/C5 rating** holds up well in harsh environments, including coastal zones. The inverter also supports aluminum wiring, lowering overall cabling costs for the installation. It's a solid fit for installers looking to balance price with premium-tier functionality.


## Questions


### What is the integrated RSD in NEP NEPTUNE inverters, and do you still need to buy a separate module?

RSD (Rapid Shutdown) cuts voltage in the PV array during an emergency and is required by many fire-safety codes. In the NEPTUNE series the RSD transmitter is built into the inverter, so installers don't need to purchase or integrate a separate third-party device. This shortens design and installation time and lowers the overall system cost.


### How does string-level monitoring and I-V curve scanning work on the NEP NEPTUNE?

The inverter continuously analyzes the performance of each string and runs an I-V curve scan to check the modules' current-voltage characteristics. This lets the system automatically detect shading, soiling, or damaged cells and flag them in the monitoring app. Issues can be diagnosed remotely without sending a service crew onto the roof just to investigate.


### Is the NEPTUNE suitable for a coastal rooftop or a corrosive industrial environment?

Yes, the enclosure has an upgraded corrosion-resistance rating of Type 4X and C5, designed for the most aggressive atmospheric conditions, including coastal and industrial zones with polluted air. This makes it well suited for commercial installations where standard enclosures would degrade faster.


### What is PID regeneration in the NEP NEPTUNE inverter, and is it reliable?

Potential-Induced Degradation (PID) is power loss caused by charge leakage from the cells to the frame or mounting structure. NEPTUNE's built-in PID regeneration function applies a reverse voltage overnight to recover that lost performance without extra hardware. This is especially valuable in large rooftop installations, where manually fixing PID would be costly.


### Can the NEP NEPTUNE inverter be wired with aluminum conductors?

Yes, NEPTUNE supports aluminum conductors on both the AC and DC connections, which is uncommon in this inverter class. Aluminum is cheaper than copper, so on large commercial installations this translates into real savings on wiring costs, especially over the longer cable runs typical of industrial rooftops.


### How does the AFCI protection in NEP NEPTUNE differ from standard fire-safety protections?

AFCI (Arc-Fault Circuit Interrupter) detects dangerous electrical arcs, such as those from damaged cable insulation, before they can start a fire, whereas standard protections mainly respond to overloads and short circuits. NEPTUNE's built-in AFCI protection complies with US safety standards, making it easier to certify installations in markets with strict fire-code requirements.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/NEP-75-100kW-3-Phase-Inverter-Datasheet-Jan-04-2024-a27a5cb1cb74.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SAJ C6-75K-T6-40](https://comparepv.com/inverter/saj-c6-75k-t6-40) | 75 kW | 98.5% |  | 93.0 kg | 8.0 kg heavier |
| [FIMER PVM-75-TL](https://comparepv.com/inverter/fimer-pvm-75-tl) | 75 kW | 98.5% | 12 | 83.0 kg | 2.0 kg lighter |
| [GoodWe GW75KBF-MT](https://comparepv.com/inverter/goodwe-gw75kbf-mt) | 75 kW | 98.4% | 4 | 65.0 kg | 20.0 kg lighter |
| [Solplanet ASW75K-LT](https://comparepv.com/inverter/solplanet-asw75k-lt) | 75 kW | 98.4% |  | 86.0 kg | 1.0 kg heavier |
| [Hopewind HSNV75K-G02](https://comparepv.com/inverter/hopewind-hsnv75k-g02) | 75 kW | 98.4% | 4 | 85.0 kg | Similar on paper |
| [GoodWe GW75K-MT](https://comparepv.com/inverter/goodwe-gw75k-mt) | 75 kW | 98.3% | 4 | 70.0 kg | 15.0 kg lighter |
| [Ginlong Solis S6-GC75K-LV](https://comparepv.com/inverter/ginlong-solis-s6-gc75k-lv) | 75 kW | 98.3% |  |  | Similar on paper |
| [Deye SUN-75K-G03](https://comparepv.com/inverter/deye-sun-75k-g03) | 75 kW | 98.3% |  | 81.0 kg | 4.0 kg lighter |


---

Source: https://comparepv.com/inverter/nep-nep-75kw

