---
title: "NEP BDM-550 Microinverter: Specs & Datasheet | ComparePV"
description: "NEP BDM-550 0.55 kW microinverter. Specs: 2 MPPT, 60 V max DC input, 2.9 kg."
source: "https://comparepv.com/inverter/nep-bdm-550"
updated: 2026-11-14
---

# NEP BDM-550


## Identity

- **Manufacturer:** NEP
- **Model:** BDM-550
- **Series:** BDM-550
- **Rated AC power:** 0.55 kW
- **Type:** Microinverter
- **Phases:** Single-phase


## How it compares

Compared against 251 microinverters. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 96.0% |  |  |
| MPPT trackers | 2 | 2 | Typical | 70 |
| Max DC input voltage | 60 V | 60 V | Typical | 72 |
| Weight per kW | 5.3 | 3.5 | Weak - bottom 15% | 212 |
| Warranty | - | 12 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 0.55 kW
- **Phases:** Single-phase
- **Nominal AC voltage:** 240 V
- **Max AC current:** 2.3 A
- **Grid frequency:** 60 Hz
- **Power factor:** -0.99 > 0.9 (adjustable) (0.9un ~0.9ov)
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 0.90 kW
- **Max DC voltage:** 60 V
- **MPPT voltage range:** 22 to 55 V
- **MPPT trackers:** 2
- **Max short-circuit current per MPPT:** 20.0 A


### Efficiency

- **CEC efficiency:** 96.5 %


### Physical

- **Dimensions:** 224 × 208 × 35 mm
- **Weight:** 2.9 kg
- **Enclosure:** IP-66 / IP-67
- **Cooling:** natural
- **Operating temperature:** -40 to 85 °C


### Connectivity and protection

- **Interfaces:** Display
- **Protocols:** Powerline Communications
- **Protection:** AFCI


### Warranty and certificates

- **Certifications:** UL 1741-SA, UL 1741-SB, CSA C22.2 NO 107.1, IEC/EN 62109-1, IEC/EN 62109-2, IEEE 1547, VDE-AR-N 4105, VDE V 0126-1-1/A1, G83/2, CEI 21, AS 4777.2, AS 4777.3, EN50438, ABNT NBR 16149/16150


### Pros

- **Dual independent MPPT inputs** - The microinverter tracks maximum power point independently for two 420 W modules, reducing losses from partial shading or mismatched panel orientation - a problem conventional string inverters cannot address at module level.
- **PLC communication, no extra wiring** - Production data is transmitted directly over the power line to the monitoring gateway, eliminating the need for a separate signal cable (e.g., RS485/Zigbee) and simplifying installation compared to solutions requiring a dedicated communication network.
- **Rugged IP67 enclosure** - IP67 ingress protection and a wide operating temperature range allow outdoor mounting in harsh weather without additional shielding, a standard expected in the roof-mounted microinverter segment.
- **Rapid shutdown compliance** - The unit meets rapid shutdown requirements, improving fire and service safety and easing compliance with standards such as NEC 690.12 in installations where this function is mandated.
- **Flexibility for staged installations** - The modular architecture (one inverter per two panels) means a single-unit failure doesn't shut down the whole system, making it particularly attractive for balcony micro-installations and complex roof geometries where a classic string setup isn't economical.


### Cons

- **Production discontinued** - The BDM-550 series (launched in 2020) has been discontinued, with NEP shifting its lineup to the newer BDM-600/650/800/1000 family. This means limited availability of service, spare parts, and technical support over the long operating life typical of microinverters (10-25 year warranties).
- **Efficiency below current Tier-1 benchmark** - The stated CEC efficiency of around 95.5% trails current segment leaders (Enphase IQ8 ~97%, APsystems DS3 ~96.7%), translating into a measurable annual yield gap when deployed across many units in an installation.
- **Lower output rating than newer variants** - The BDM-550 has the lowest power rating in its family (550 W) compared to its successors BDM-600/650/800/1000, which in practice limits it to smaller PV modules and makes it a less versatile choice for new projects using panels above 450 Wp.


## About this series

The BDM-550 series is a **microinverter** built for installations where safety and flexibility matter at the level of a single module, not the whole string. With **two independent MPPT inputs**, the unit manages two PV modules at once, tracking their maximum power point separately to reduce losses caused by partial shading, soiling, or mismatched panel orientation - a weakness that conventional string inverters simply cannot overcome. This makes it an especially strong fit for balcony PV systems, roofs with complex geometry, and phased installations, where a single component failure shouldn't take down the entire system. **PLC communication** sends production data straight over the power line to a monitoring gateway, removing the need for extra signal wiring and simplifying setup. A rugged **IP67-rated enclosure** paired with a wide operating temperature range allows outdoor mounting in harsh weather conditions without compromising durability. The unit also meets **rapid shutdown compliance** requirements, improving fire safety and service-side protection. The BDM-550 is the choice for installers looking for straightforward installation, high reliability, and real savings throughout the system's operating life.


## Questions


### Is the NEP BDM-550 microinverter still available for purchase?

The BDM-550 series has been discontinued by manufacturer NEP and is no longer offered as a new product. Units may still be available through distributors while stock lasts. If you plan to expand an existing installation, check availability with your supplier in advance or consider a current NEP model compatible with your existing monitoring gateway.


### How does the BDM-550 microinverter differ from a conventional string inverter?

The BDM-550 operates at the individual module level rather than across an entire panel string. Thanks to two independent MPPT inputs, each of the two connected modules has its own maximum power point tracking, so shading, soiling, or a different panel orientation on one module does not reduce output from the other. On a string inverter, the same issue on one panel can drag down the whole string's performance.


### Does the BDM-550 require extra wiring for production monitoring?

No, the BDM-550 uses PLC communication, transmitting production data directly over the power line to the monitoring gateway. This eliminates the need for a separate signal cable or a dedicated WiFi/RF module at each microinverter, speeding up installation and reducing the number of components that could fail.


### Can the BDM-550 microinverter be installed outdoors in harsh weather conditions?

Yes, the enclosure has an IP67 rating, meaning it is resistant to dust and temporary immersion in water, and the unit operates across a wide temperature range. This allows mounting directly under the panels on a roof, balcony, or facade without needing extra protection from rain, snow, or frost.


### What does the rapid shutdown feature on the BDM-550 do, and is it required?

Rapid shutdown quickly de-energizes a PV installation and is mandated in many countries, and increasingly in Poland, for firefighter and service personnel safety. The BDM-550 supports this feature, meaning voltage on the panels and DC wiring can be rapidly reduced to a safe level when needed, lowering the risk of electric shock during emergency response or maintenance.


### What types of installations is the BDM-550 microinverter best suited for?

The BDM-550 works well for balcony micro-installations, roofs with irregular, multi-section geometry, and phased installations where panels are added over time. Because it handles two modules independently, a fault or shading on one panel does not shut down the whole system, making it more reliable than string-based solutions in these scenarios.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/BDM-550-Datasheet-102623-1-646d35363f0e.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Enphase IQ9S-3P-277-B-DOM-US](https://comparepv.com/inverter/enphase-iq9s-3p-277-b-dom-us) | 0.55 kW |  | 1 | 1.2 kg | -1 MPPT, 1.7 kg lighter |
| [APsystems YC600-SAA](https://comparepv.com/inverter/apsystems-yc600-saa) | 0.55 kW |  | 2 | 2.6 kg | Similar on paper |
| [NEP BDM-600X](https://comparepv.com/inverter/nep-bdm-600x) | 0.59 kW |  | 2 | 2.9 kg | Similar on paper |
| [TSUN TSOL-MX500](https://comparepv.com/inverter/tsun-tsol-mx500) | 0.5 kW | 96.5% | 1 | 2.1 kg | -1 MPPT |
| [Deye SUN-M50G4-EU-Q0-I](https://comparepv.com/inverter/deye-sun-m50g4-eu-q0-i) | 0.5 kW | 96.0% | 1 | 1.9 kg | -1 MPPT, 1.0 kg lighter |
| [Deye SUN500G3-EU-230](https://comparepv.com/inverter/deye-sun500g3-eu-230) | 0.5 kW |  | 1 | 3.5 kg | -1 MPPT |
| [Deye SUN500G-230-EU](https://comparepv.com/inverter/deye-sun500g-230-eu) | 0.5 kW |  | 2 | 2.4 kg | Similar on paper |
| [Deye SUN600G2-US-127](https://comparepv.com/inverter/deye-sun600g2-us-127) | 0.5 kW |  | 2 | 2.4 kg | Similar on paper |


---

Source: https://comparepv.com/inverter/nep-bdm-550

