---
title: "NEP BDM-500 Microinverter: Specs & Datasheet | ComparePV"
description: "NEP BDM-500 0.5 kW microinverter. Specs: 1 MPPT, 60 V max DC input, 2.9 kg."
source: "https://comparepv.com/inverter/nep-bdm-500"
updated: 2026-11-14
---

# NEP BDM-500


## Identity

- **Manufacturer:** NEP
- **Model:** BDM-500
- **Series:** BDM-500
- **Rated AC power:** 0.5 kW
- **Type:** Microinverter
- **Phases:** Single-phase


## How it compares

Compared against 251 microinverters. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 96.0% |  |  |
| MPPT trackers | 1 | 2 | Weak - bottom 15% | 153 |
| Max DC input voltage | 60 V | 60 V | Typical | 72 |
| Weight per kW | 5.8 | 3.5 | Weak - bottom 11% | 223 |
| Warranty | - | 12 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 0.5 kW
- **Max AC power:** 0.55 kW
- **Phases:** Single-phase
- **Max AC current:** 2.4 A
- **Power factor:** >0.99
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 0.75 kW
- **Max DC voltage:** 60 V
- **MPPT voltage range:** 22 to 55 V
- **MPPT trackers:** 1
- **Max input current per MPPT:** 25.0 A
- **Max short-circuit current per MPPT:** 25.0 A


### Efficiency

- **CEC efficiency:** 95.5 %


### Physical

- **Dimensions:** 132 × 277 × 50 mm
- **Weight:** 2.9 kg
- **Enclosure:** NEMA-6/IP-66/IP-67
- **Operating temperature:** -40 to 85 °C


### Connectivity and protection

- **Interfaces:** Display
- **Protocols:** Power Line
- **Protection:** AFCI


### Warranty and certificates

- **Certifications:** UL1741, CSA C22.2 No107.1, IEC/EN62109-1, IEC/EN62109-2


### Pros

- **Independent MPPT per panel** - Each module (or panel pair) has its own DC/AC conversion point, so shading or failure of a single panel does not drag down output of the whole string - the classic advantage of microinverters over traditional string inverters.
- **Single- or dual-panel compatibility (60/72-cell)** - Flexible single- or dual-panel configuration lets installers reduce the unit count and DC wiring versus microinverters limited to one panel each, meaningfully cutting BoS costs.
- **IP67/NEMA-6 enclosure for under-panel mounting** - Manufacturer-rated IP67/NEMA-6 ingress protection enables permanent outdoor mounting directly under the module, across a wide range of weather conditions and operating temperatures.
- **Module-level Power Line monitoring** - Power Line Communication (without added Wi-Fi/Zigbee in this generation) provides diagnostics down to the individual module, simplifying fault localization within the array.
- **Rapid shutdown compliance** - The series supports DC rapid-shutdown functions and short-circuit protection aligned with rooftop PV safety requirements (e.g., NEC 690.12 and equivalents), easing inspection approval.


### Cons

- **Discontinued production** - The BDM-500 series (launched 2020) has been discontinued in favor of newer NEP generations (BDM-550/600X/650/800/1000), meaning limited service availability, spare parts, and technical support for existing installations.
- **Shorter warranty than segment leaders** - NEP installation documentation lists a warranty around 10 years, while leading microinverter brands (Enphase IQ8, APsystems) standardly offer 20-25 years - a significant gap for a product expected to match the PV panel's service life.
- **Limited brand standing vs. tier-1 microinverters** - NEP has a much shorter market track record and smaller reference install base than Enphase or APsystems; independent reviews (SolarReviews) note inconsistencies in the manufacturer's warranty documentation, which can affect perceived service reliability.


## About this series

The NEP BDM-500 series is a **module-level microinverter**, engineered to work with either one or two 60- or 72-cell panels, making it a flexible choice for both residential installations and smaller commercial systems. Instead of relying on a single central converter, each panel (or panel pair) gets its own independent DC/AC conversion point, so shading, soiling, or module mismatch no longer drags down the performance of the entire string - a drop in output or failure of one panel does not reduce the production of the others. It is precisely this **independent MPPT tracking for each module** that sets this series apart from conventional string inverters. Its **sealed IP67/NEMA-6 enclosure** allows installation directly under the panel, outdoors, in demanding weather conditions and across a wide operating temperature range. The series supports **Power Line communication** for module-level monitoring along with safety features aligned with rapid shutdown requirements for PV systems and DC fault protection. This is a solution for installers seeking straightforward mounting, high rooftop safety, and long-term, module-by-module diagnostics of solar system performance.


## Questions


### Is the NEP BDM-500 microinverter still available for purchase?

The NEP BDM-500 series has been discontinued and is no longer offered as a new product. For servicing or expanding existing installations, it's best to contact a distributor to check availability of a replacement unit or a compatible model from NEP's current lineup, as service support and spare parts may be limited.


### How does the BDM-500 microinverter differ from a traditional string inverter?

Instead of a single central converter handling an entire string of panels, the BDM-500 assigns an independent DC/AC conversion point and dedicated MPPT tracking to one or two panels. This means shading, soiling, or power loss on one module doesn't affect the output of the others, unlike string inverters where the whole chain's performance can be limited by the weakest panel.


### Is the BDM-500 suitable for outdoor installation in harsh weather conditions?

Yes, the IP67/NEMA-6 rated enclosure allows mounting directly under the panel on a rooftop without additional protection from rain, dust, or moisture. The unit is built for a wide operating temperature range, making it suitable for residential installations exposed to variable weather conditions.


### What solar panels is the BDM-500 microinverter compatible with?

The BDM-500 series is designed to work with one or two 60-cell or 72-cell panels, offering flexibility when designing residential installations and smaller commercial systems. This configuration lets installers match the number of microinverters to the specific roof layout and installed module power.


### How can you monitor individual panel performance with the BDM-500?

The microinverter uses Power Line communication to transmit energy production data directly from each module to the monitoring system. This allows installers and homeowners to track the performance of every single panel and quickly detect power drops caused by shading, malfunction, or soiling.


### Does a BDM-500 installation meet rooftop safety requirements?

Yes, the series supports safety features compliant with PV rapid shutdown requirements and DC short-circuit protection. The independent microinverter architecture also limits DC voltage on the roof compared to string-based systems, making work safer for firefighters and service technicians.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/BDM-500-Datasheet-b8702b12f4cb.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [TSUN TSOL-MX500](https://comparepv.com/inverter/tsun-tsol-mx500) | 0.5 kW | 96.5% | 1 | 2.1 kg | Similar on paper |
| [Deye SUN-M50G4-EU-Q0-I](https://comparepv.com/inverter/deye-sun-m50g4-eu-q0-i) | 0.5 kW | 96.0% | 1 | 1.9 kg | 1.0 kg lighter |
| [Deye SUN500G3-EU-230](https://comparepv.com/inverter/deye-sun500g3-eu-230) | 0.5 kW |  | 1 | 3.5 kg | Similar on paper |
| [Deye SUN500G-230-EU](https://comparepv.com/inverter/deye-sun500g-230-eu) | 0.5 kW |  | 2 | 2.4 kg | +1 MPPT |
| [Deye SUN600G2-US-127](https://comparepv.com/inverter/deye-sun600g2-us-127) | 0.5 kW |  | 2 | 2.4 kg | +1 MPPT |
| [Sunsynk SUN500G3-EU-230](https://comparepv.com/inverter/sunsynk-sun500g3-eu-230) | 0.5 kW |  |  | 3.5 kg | Similar on paper |
| [Hoymiles HMS-500-1WB](https://comparepv.com/inverter/hoymiles-hms-500-1wb) | 0.5 kW |  | 1 | 1.8 kg | 1.1 kg lighter |
| [Sigenergy SigenMicro 500](https://comparepv.com/inverter/sigenergy-sigenmicro-500) | 0.5 kW |  |  | 2.8 kg | Similar on paper |


---

Source: https://comparepv.com/inverter/nep-bdm-500

