---
title: "NEP BDM 250-LV Microinverter: Specs & Datasheet | ComparePV"
description: "NEP BDM 250-LV 0.22 kW microinverter. Specs: 1 MPPT, 60 V max DC input, 2.0 kg."
source: "https://comparepv.com/inverter/nep-bdm-250-lv"
updated: 2026-11-14
---

# NEP BDM 250-LV


## Identity

- **Manufacturer:** NEP
- **Model:** BDM 250-LV
- **Series:** BDM-LV
- **Rated AC power:** 0.22 kW
- **Type:** Microinverter
- **Phases:** Single-phase


## How it compares

Compared against 251 microinverters. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 96.0% |  |  |
| MPPT trackers | 1 | 2 | Weak - bottom 15% | 153 |
| Max DC input voltage | 60 V | 60 V | Typical | 72 |
| Weight per kW | 9.1 | 3.5 | Weak - bottom 2% | 244 |
| Warranty | - | 12 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 0.22 kW
- **Phases:** Single-phase
- **Nominal AC voltage:** 120 V
- **Max AC current:** 1.8 A
- **Grid frequency:** 60 Hz
- **Power factor:** >0.99 (fixed)
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 0.28 kW
- **Max DC voltage:** 60 V
- **MPPT voltage range:** 22 to 55 V
- **MPPT trackers:** 1
- **Max input current per MPPT:** 12.0 A
- **Max short-circuit current per MPPT:** 14.0 A


### Efficiency

- **CEC efficiency:** 95.0 %


### Physical

- **Dimensions:** 132 × 277 × 50 mm
- **Weight:** 2.0 kg
- **Enclosure:** NEMA-6/IP-66/IP-67
- **Cooling:** natural
- **Operating temperature:** -40 to 65 °C


### Connectivity and protection

- **Interfaces:** Display
- **Protocols:** Power Line Communication
- **Protection:** AFCI


### Warranty and certificates

- **Certifications:** UL 1741, CSA C22.2 No. 107.1, IEEE 1547


### Pros

- **Module-level MPPT architecture** - Each microinverter operates at single-panel level, so shading or failure of one module does not reduce output of the rest of the array, unlike traditional string inverters or group-level optimizers. This meaningfully improves energy yield on roofs with partial shading from chimneys or trees.
- **Full galvanic DC/AC isolation** - A built-in isolation transformer provides full galvanic separation between DC and AC circuits, a design less common than the transformerless topologies used by much of the competition (e.g., Hoymiles, Deye), raising the overall safety margin of the installation.
- **NEMA-6/IP-66/IP-67 enclosure rating** - Manufacturer documentation confirms NEMA-6/IP-66/IP-67 ingress protection, enabling outdoor mounting across a wide temperature and humidity range - a tier-1 benchmark for rooftop microinverters.
- **Comprehensive installation-level protections** - Integrated short-circuit protection, rapid shutdown, and reverse-polarity protection reduce installation-error risk and ease compliance with rooftop fire-safety requirements.
- **High CEC efficiency of ~95.5%** - BDM-family units (e.g., BDM-600) report CEC efficiency of 95.5%, matching the upper range typical for the microinverter segment and comparable to Hoymiles HMS and Envertech EVT figures.


### Cons

- **Powerline communication requires a separate gateway** - Unlike competitors with integrated RF or Wi-Fi modules (Hoymiles DTU, Envertech RF dongle), BDM-LV monitoring requires purchasing a separate BDG-256 powerline gateway, raising total system cost and adding installation complexity versus single-component solutions.
- **Ambiguous and shorter warranty versus peers** - Manufacturer data points to a 10-12 year warranty depending on the specific BDM model, while comparable microinverters such as Hoymiles HMS offer 12 years and Envertech EVT up to 15 years - placing BDM-LV at or below the lower end of the segment on this criterion.


## About this series

The **NEP BDM-LV microinverter series** is built to operate at the level of a single PV module rather than an entire string. With this architecture, a failure or shading issue on one module does not affect the output of the others, which meaningfully improves energy yield in installations exposed to uneven sunlight, chimney shadows, or nearby trees. The unit features an **isolation transformer** providing full galvanic separation between the DC and AC circuits, substantially enhancing operational safety. A rugged, **sealed enclosure** rated NEMA-6/IP-66/IP-67 supports both indoor and outdoor mounting across a wide temperature range and demanding weather conditions. Built-in connectors and AC cabling shorten installation time, while **powerline communication** with the monitoring gateway allows per-module performance tracking. Integrated overcurrent protection, rapid shutdown functionality, and reverse-polarity protection make the BDM-LV series an appealing choice for installers who value straightforward servicing and rooftop system safety, especially where minimizing single-point-of-failure risk matters most.


## Questions


### What is the difference between the NEP BDM-LV microinverter and a standard string inverter?

The BDM-LV microinverter is installed under each PV module and converts power from a single panel rather than an entire string. This means a fault, shading, or soiling on one module does not reduce output from the rest of the array, which is a common issue with string inverters. This architecture increases overall energy yield, especially on roofs with partial shading from chimneys, antennas, or trees.


### Are BDM-LV microinverters safe in case of a fire or system fault?

Yes, the BDM-LV series includes an isolation transformer that provides full galvanic separation between the DC and AC circuits, reducing the risk of shock and short circuits. It also features built-in short-circuit protection, reverse-polarity protection, and a rapid shutdown function, which is required by many safety codes during rooftop servicing.


### Can the NEP BDM-LV microinverter be installed outdoors in harsh weather conditions?

Yes, the BDM-LV enclosure is rated NEMA-6/IP-66/IP-67, meaning it is fully protected against dust ingress and powerful water jets. The unit can be mounted outdoors directly beneath the panel across a wide temperature range, making it suitable for rooftop installations exposed to rain, snow, and temperature swings.


### How do you monitor the performance of a single panel with the BDM-LV microinverter?

The BDM-LV series uses powerline communication to send production data over the existing AC wiring to a dedicated monitoring gateway. This lets installers or system owners track the performance of each module individually, quickly detect a drop in output from a specific panel, and respond before it affects the rest of the system.


### Is installing a system with BDM-LV microinverters more complex than with a string inverter?

No, the built-in AC connectors and wiring reduce installation time compared to conventional string wiring. Each microinverter is mounted directly beneath its panel, eliminating the need for long DC cable runs across the roof. Installers also appreciate simpler servicing, since a fault in one unit doesn't require disconnecting the entire string.


### What type of rooftop installation is the NEP BDM-LV series best suited for?

BDM-LV is particularly well suited for roofs with uneven sun exposure, such as partial shading from chimneys, dormers, or trees, where a traditional string inverter would reduce output across the whole array. Thanks to its module-level architecture and rugged enclosure, this series also performs well in harsher climates and on roofs with complex geometry.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/BDM-250-LV-bac131480ab6.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Enphase IQ7PD-84-2-US](https://comparepv.com/inverter/enphase-iq7pd-84-2-us) | 0.21 kW |  | 1 | 1.1 kg | Similar on paper |
| [Enphase IQ8-60-M-US](https://comparepv.com/inverter/enphase-iq8-60-m-us) | 0.24 kW |  | 1 | 1.1 kg | Similar on paper |
| [Enphase IQ8-60-2-US](https://comparepv.com/inverter/enphase-iq8-60-2-us) | 0.24 kW |  | 1 | 1.1 kg | Similar on paper |
| [Enphase IQ7-60-2-US](https://comparepv.com/inverter/enphase-iq7-60-2-us) | 0.24 kW |  | 1 | 1.1 kg | Similar on paper |
| [Enphase IQ7PD-72-2-US](https://comparepv.com/inverter/enphase-iq7pd-72-2-us) | 0.19 kW |  | 1 | 1.1 kg | Similar on paper |
| [NEP BDM-300](https://comparepv.com/inverter/nep-bdm-300) | 0.25 kW |  | 1 | 1.5 kg | Similar on paper |


---

Source: https://comparepv.com/inverter/nep-bdm-250-lv

