---
title: "NEP BDH-12KSP-LB Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "NEP BDH-12KSP-LB 12 kW hybrid inverter. Specs: 600 V max DC input, 52.0 kg, 10 yrs warranty."
source: "https://comparepv.com/inverter/nep-bdh-12ksp-lb"
updated: 2026-11-14
---

# NEP BDH-12KSP-LB


## Identity

- **Manufacturer:** NEP
- **Model:** BDH-12KSP-LB
- **Series:** BDH-KSP-LB
- **Rated AC power:** 12 kW
- **Type:** Hybrid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 97.5% |  |  |
| MPPT trackers | - | 2 |  |  |
| Max DC input voltage | 600 V | 800 V | Typical | 409 |
| Weight per kW | 4.3 | 3.0 | Weak - bottom 17% | 679 |
| Warranty | 10 yrs | 5 yrs | Strong - top 19% | 13 |


## Specification


### AC output

- **Rated AC power:** 12 kW
- **Phases:** Single-phase
- **Nominal AC voltage:** 240 V
- **Max AC current:** 50.0 A
- **Grid frequency:** 60 Hz
- **Power factor:** 0.9 leading to 0.9 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 18.00 kW
- **Max DC voltage:** 600 V
- **MPPT voltage range:** 120 to 500 V
- **Start-up voltage:** 140 V


### Efficiency

- **Max efficiency:** 97.5 %
- **CEC efficiency:** 96.5 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 40~60V


### Physical

- **Dimensions:** 860 × 500 × 290 mm
- **Weight:** 52.0 kg
- **Enclosure:** NEMA 4X
- **Cooling:** forced-air
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, CAN, Wi-Fi
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** UL 1741, UL 1741SA, UL 1741SB, IEEE 1547, IEEE 1547.1, IEEE 1547a, HECO SRD-IEEE-1547.1:2020 Ed.2.0, CSA C22.2 No.107.1, CSA C22.2 No.330, UL 1998:2018, IEEE 2030.5, Rule 21 SA17-18


### Pros

- **Three independent MPPTs, wide input range** - Up to three MPPT trackers with a 100-600V input range (120-500V MPPT window) allow combining strings of different orientation and shading levels on one inverter, simplifying design for complex roof layouts without sacrificing yield.
- **Aggressive PV oversizing relative to AC rating** - The BDH-12KSP-LB accepts up to 18kW of PV against 12kW AC output (roughly 1.5x DC/AC ratio), a higher ceiling than many peer comparables in this class, improving generation during low-irradiance periods.
- **High peak EPS power for motor starting loads** - EPS surge support enables short-duration overloads needed to start AC compressors, pumps, or motors, setting it apart from hybrids that only offer rated continuous power in off-grid/backup mode.
- **Automatic battery wake-up from PV** - The self-wake-up function after deep discharge removes the need for a manual service restart following a blackout, reducing real-world technical support costs for installers managing multiple end-user systems.
- **Scalable to 10 parallel units, NEMA 4X enclosure** - Parallel operation of up to 10 units allows commercial-scale deployments from a single model line, and the NEMA 4X-rated enclosure supports outdoor installation without an added cabinet, lowering BoS costs.


### Cons

- **Low-voltage 48V architecture** - The system runs on a 48V battery bus, while some competitors in the hybrid segment use high-voltage architectures (200-500V) to reach comparable power at lower currents; scaling multiple parallel units therefore requires heavier DC cabling and higher installation cost.
- **Limited market track record for the brand** - The series launched in 2023, and NEP has a shorter history in the split-phase hybrid inverter segment than established Tier-1 players (Growatt, Deye, FoxESS), meaning fewer independent long-term field tests and less publicly available durability data.


## About this series

The BDH-8/10/12KSP-LB series consists of hybrid inverter-chargers built for split-phase 120/240V systems, combining grid-tied inversion, battery charge control, and backup power functionality in a single enclosure. Each unit features up to three independent MPPT trackers, enabling flexible array layouts with multiple strings at different orientations, while the wide DC input voltage range simplifies module selection even under partial shading conditions. A standout feature of the series is **EPS backup with high surge capacity**, allowing short-term overloads needed to start motors, air conditioners, or pumps, making these inverters a strong choice for households and small businesses that depend on uninterrupted power. The **PV-triggered battery wake-up** function automatically restarts the system after deep discharge, eliminating the need for a service call. The ability to run **up to 10 units in parallel** lets installers scale system capacity up to commercial levels, while the transformerless topology reduces energy losses and unit footprint. Compliance with **UL1741 and IEEE1547 standards**, along with built-in arc-fault protection and rapid shutdown (RSD), ensures safety in both grid-tied and off-grid operation. This is a solution for installers seeking a reliable, modular energy storage system that delivers real resilience during grid outages.


## Questions


### What is the maximum EPS surge power of NEP BDH-KSP-LB inverters and why does it matter?

The BDH-8/10/12KSP-LB series offers EPS support with high peak power output, enabling short-term overloads well above rated power. This lets the inverter easily start high-inrush-current motors such as AC compressors, well pumps, or heat pumps without tripping the backup power supply. It's a real advantage for homes and businesses where sudden load spikes are common.


### Can BDH-KSP-LB inverters be combined into a larger energy storage system?

Yes, the BDH-KSP-LB series supports parallel operation of up to 10 units. This allows the system power to scale from residential applications up to commercial-level installations while keeping the modular design intact. This architecture makes future expansion easier without replacing existing equipment, letting installers match the number of inverters to current and future energy needs.


### What happens when the battery in a system with an NEP BDH-KSP-LB inverter is fully depleted?

Inverters in this series feature PV wake-up for battery recovery, which automatically restarts the system after deep discharge using energy from the solar panels. No service call or manual reset is required. This is an important safeguard during extended low-sunlight periods or grid outages, when the battery storage has been drawn down to its minimum.


### How many MPPT trackers does the BDH-KSP-LB inverter have and what does this mean for system design?

Units in this series feature up to three independent MPPT trackers, allowing multiple PV strings with different orientations, tilt angles, or shading levels to connect to a single inverter. A wide input voltage range makes module selection easier even in challenging conditions, such as roofs with multiple sections facing different directions.


### Is the NEP BDH-KSP-LB inverter designed for single-phase installations in the US?

Yes, the BDH-8/10/12KSP-LB series is designed specifically for single-phase split-phase 120/240V systems, common in North America. The inverter combines grid-tie inverter, battery charge controller, and backup power functions in one enclosure, simplifying installation and reducing the number of components needed in a residential system.


### What safety standards does the BDH-KSP-LB series meet, and does it include fire protection?

The inverters comply with UL1741 and IEEE1547 standards, required for grid-tied installations in the US. They also include built-in arc-fault protection and a rapid shutdown (RSD) function that automatically cuts voltage in PV strings in case of a hazard. The transformerless topology reduces energy losses and allows for a smaller device footprint.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/BDH-8_10_12KSP-LB_Datasheet_20250416-d3430240245d.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy SigenStor Neo EC 12.0 TP](https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-12-0-tp) | 12 kW | 98.7% |  | 30.0 kg | 22.0 kg lighter |
| [Sigenergy Sigen Hybrid 12.0 TP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-12-0-tp2) | 12 kW | 98.6% | 2 | 19.5 kg | 32.5 kg lighter |
| [Growatt MID 12KTL3-XH](https://comparepv.com/inverter/growatt-mid-12ktl3-xh) | 12 kW | 98.5% |  | 31.0 kg | 21.0 kg lighter |
| [RCT Power 12.0](https://comparepv.com/inverter/rct-power-12-0) | 12 kW | 98.4% | 2 | 35.0 kg | 17.0 kg lighter |
| [Huawei SUN5000-12K-MAP0](https://comparepv.com/inverter/huawei-sun5000-12k-map0) | 12 kW | 98.2% | 2 | 21.0 kg | 31.0 kg lighter |
| [Huawei SUN2000-12KTL-M1 (High current version)](https://comparepv.com/inverter/huawei-sun2000-12ktl-m1-high-current-version) | 12 kW | 98.2% | 2 | 17.0 kg | 35.0 kg lighter |
| [Huawei SUN2000-12K-MAP0](https://comparepv.com/inverter/huawei-sun2000-12k-map0) | 12 kW | 98.2% | 2 | 21.0 kg | 31.0 kg lighter |
| [Huawei SUN2000-12KTL-M1](https://comparepv.com/inverter/huawei-sun2000-12ktl-m1) | 12 kW | 98.2% | 2 | 17.0 kg | 35.0 kg lighter |


---

Source: https://comparepv.com/inverter/nep-bdh-12ksp-lb

