---
title: "Luxpower SNA PRO-EU 4K Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Luxpower SNA PRO-EU 4K 4 kW hybrid inverter. Specs: 96.9% European efficiency, 2 MPPT, 500 V max DC input, 16.9 kg, 5 yrs warranty."
source: "https://comparepv.com/inverter/luxpower-sna-pro-eu-4k"
updated: 2026-11-05
---

# Luxpower SNA PRO-EU 4K


## Identity

- **Manufacturer:** Luxpower
- **Model:** SNA PRO-EU 4K
- **Series:** SNA PRO-EU
- **Rated AC power:** 4 kW
- **Type:** Hybrid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 1,005 inverters from 3 to 6 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.9% | 97.1% | Typical | 521 |
| MPPT trackers | 2 | 2 | Typical | 59 |
| Max DC input voltage | 500 V | 600 V | Weak - bottom 14% | 701 |
| Weight per kW | 4.2 | 3.9 | Typical | 544 |
| Warranty | 5 yrs | 5 yrs | Typical | 109 |


## Specification


### AC output

- **Rated AC power:** 4 kW
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 17.5 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.99
- **Harmonic distortion (THD):** 5.0 %


### PV input

- **Max DC input power:** 8.00 kW
- **Max DC voltage:** 500 V
- **MPPT voltage range:** 60 to 400 V
- **Start-up voltage:** 60 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 20.0 A
- **Max short-circuit current per MPPT:** 25.0 A


### Efficiency

- **European efficiency:** 96.9 %
- **Max efficiency:** 96.9 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 40-60V
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 434 × 384 × 187 mm
- **Weight:** 16.9 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Noise:** 40 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 95 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, Wi-Fi, CAN
- **Protection:** DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 5 years
- **Certifications:** EN61000, EN62109-1, EN62109-2, NRS097, MEA/PEA, IEC62116, IEC61727, INMETRO Portaria 140/515


### Pros

- **Seamless grid/off-grid switching** - The series combines full off-grid island-mode operation with hybrid functionality, delivering automatic, uninterrupted power switching for critical loads - a feature rarely available at this power class (3-8 kW) versus competitors that more commonly offer switching with a brief interruption of tens of milliseconds.
- **Scalability up to 16 parallel units** - Support for up to 16 paralleled inverters allows systems to scale from a single home to larger commercial sites without changing the hardware platform, a higher limit than many comparable EU hybrid series, which typically cap out at 6-10 units.
- **Dedicated generator port with start/stop control** - A built-in GEN terminal with remote generator start/stop control provides real flexibility for managing energy sources in regions with unstable grid supply, without requiring an external controller.
- **IP66-rated enclosure for outdoor installation** - The IP66 ingress protection rating allows outdoor mounting in harsh weather conditions, setting the series apart from some competing hybrid inverters limited to IP65 or indoor-only installation.
- **Remote configuration and real-time monitoring** - RS485/WiFi/CAN connectivity combined with the Luxpower monitoring platform enables remote diagnostics and parameter configuration, reducing service time for installers managing multiple sites.


### Cons

- **Standard warranty shorter than segment leaders** - Luxpower typically offers a 5-year base warranty for this series, while several competing tier-1 hybrid inverter manufacturers (e.g., Sungrow, Deye) provide a standard 10-year warranty - extended coverage requires an additional purchase.
- **Only 2 MPPTs across power variants** - The 3-6.5 kW variants feature just 2 MPPT trackers, which can limit yield optimization on multi-string installations with varying roof orientation/tilt compared to competing units in this power class offering 3-4 MPPTs.


## About this series

The SNA PRO-EU 3-8K series comprises Eco Hybrid energy storage inverters designed for residential and commercial installations that need genuine independence from the grid, not just a photovoltaic add-on. This inverter combines hybrid-mode operation with full off-grid capability, offering **seamless automatic switching between grid and off-grid modes**, so critical loads never lose power during an outage. Thanks to a **dedicated port for a generator or smart load management**, users gain flexibility in planning their energy sources, especially in regions with unstable grid supply. The series stands out from competitors through its ability to **link up to 16 units in parallel**, allowing the system to scale from a small home up to larger commercial installations without switching hardware platforms. The IP66-rated enclosure supports outdoor mounting in harsh weather conditions. Integrators and installers will appreciate the **remote configuration and real-time performance monitoring**, which significantly shortens service and diagnostic time. This is a solution for those who want to combine backup power stability with the cost-effectiveness of solar in a single, compact unit.


## Questions


### What is the difference between the SNA PRO-EU hybrid mode and off-grid island mode?

The SNA PRO-EU inverter combines both functions in one unit: in hybrid mode it works together with the grid, optimizing self-consumption from solar and the battery, while in off-grid mode it powers the installation independently of the grid. Switching between these modes is automatic and uninterrupted, so critical home loads such as a fridge or heat pump never lose power during a grid outage.


### How many SNA PRO-EU units can be connected in parallel in one installation?

The SNA PRO-EU series supports connecting up to 16 units in parallel, allowing the system's power output and battery capacity to scale from a small single-family home to a larger commercial installation without switching to a different hardware platform. This is convenient for installers planning future expansion, since additional units can simply be added to the existing setup.


### Can the SNA PRO-EU be installed outdoors?

Yes, the inverter's enclosure has an IP66 rating, meaning full protection against dust and powerful water jets from any direction. This allows the unit to be mounted outdoors, for example on an outbuilding wall, even in harsh weather conditions, without needing an additional protective canopy or enclosure.


### What is the generator port on the SNA PRO-EU used for?

The dedicated generator port lets you connect a backup generator as an additional power source and manage it alongside other home loads. This is especially useful in regions with an unstable grid or during extended outages, when solar panels and the battery alone may not be enough, for example in winter with limited sunlight.


### Can an installer remotely monitor the SNA PRO-EU inverter's operation?

Yes, the series supports remote configuration and real-time monitoring through the manufacturer's platform. An installer or service technician can check operating parameters, error history, and battery status without visiting the site, which significantly speeds up diagnostics and reduces the number of service calls.


### What warranty does the SNA PRO-EU come with, and where is it manufactured?

SNA PRO-EU inverters come with the manufacturer's standard warranty, typically 5 years, though the exact term is worth confirming with your local distributor since it can vary by market. The units are designed by Luxpower, a company headquartered in China, and reach the European market through a network of certified distributors and installers.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/SNA-PRO-EU-3-8K-Datasheet-English20261023-23d3048e0cef.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolarEdge SE4000H](https://comparepv.com/inverter/solaredge-se4000h) | 4 kW | 99.0% |  | 12.0 kg | +2.1 pp efficiency, 4.9 kg lighter |
| [Sigenergy Sigen Hybrid 4.0 SP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-4-0-sp2) | 4 kW | 98.2% | 2 | 11.5 kg | +1.3 pp efficiency, 5.4 kg lighter |
| [HYXiPower HYX-H4K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h4k-hsa2) | 4 kW | 98.2% |  | 38.0 kg | +1.3 pp efficiency, 21.1 kg heavier |
| [Huawei SUN2000L-4KTL](https://comparepv.com/inverter/huawei-sun2000l-4ktl) | 4 kW | 97.9% | 2 | 10.6 kg | +1.0 pp efficiency, 6.3 kg lighter |
| [Growatt MOD 4000TL3-HU](https://comparepv.com/inverter/growatt-mod-4000tl3-hu) | 4 kW | 97.8% | 2 | 19.0 kg | +0.9 pp efficiency, 2.1 kg heavier |
| [Sigenergy Sigen Hybrid 4.0 TP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-4-0-tp2) | 4 kW | 97.8% | 2 | 19.5 kg | +0.9 pp efficiency, 2.6 kg heavier |
| [SolaX X3-HYB-4.0-P](https://comparepv.com/inverter/solax-x3-hyb-4-0-p) | 4 kW | 97.7% | 3 | 38.0 kg | +0.8 pp efficiency, +1 MPPT, 21.1 kg heavier |
| [SolaX X3-IES-4K-P](https://comparepv.com/inverter/solax-x3-ies-4k-p) | 4 kW | 97.7% | 3 | 40.0 kg | +0.8 pp efficiency, +1 MPPT, 23.1 kg heavier |


---

Source: https://comparepv.com/inverter/luxpower-sna-pro-eu-4k

