---
title: "Livoltek HP3-60KS1 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Livoltek HP3-60KS1 60 kW hybrid inverter. Specs: 98.0% European efficiency, 5 MPPT, 1100 V max DC input, 80.0 kg."
source: "https://comparepv.com/inverter/livoltek-hp3-60ks1"
updated: 2026-11-14
---

# Livoltek HP3-60KS1


## Identity

- **Manufacturer:** Livoltek
- **Model:** HP3-60KS1
- **Series:** HP3 S1
- **Rated AC power:** 60 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.0% | 98.2% | Typical | 274 |
| MPPT trackers | 5 | 4 | Typical | 92 |
| Max DC input voltage | 1100 V | 1100 V | Typical | 12 |
| Weight per kW | 1.3 | 1.2 | Typical | 332 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 60 kW
- **Max apparent power:** 66.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 100.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading - 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 120.00 kW
- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 150 to 1000 V
- **MPPT trackers:** 5
- **Max input current per MPPT:** 45.0 A
- **Max short-circuit current per MPPT:** 55.0 A


### Efficiency

- **European efficiency:** 98.0 %
- **Max efficiency:** 98.4 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 120-900V
- **Max charge current:** 160.0 A
- **Max discharge current:** 160.0 A
- **Backup power:** 44.00 kW


### Physical

- **Dimensions:** 895 × 620 × 300 mm
- **Weight:** 80.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Noise:** 65 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 95 %
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** Wi-Fi, DO, DI, RS485, CAN
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** IEC61727, IEC62116, EN50549-1/10, IEC/EN 62109-1/-2, EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, IEC/EN 62920


### Pros

- **Dual independent battery inputs** - The HP3 S1 series offers two separate battery storage ports, allowing storage capacity to be scaled up without compromising charge/discharge management - a feature rare at this power class, where competitors often limit units to a single BMS port.
- **Parallel operation of up to 10 units** - Up to 10 inverters can be connected in parallel, enabling commercial installations of several hundred kW without a separate master controller, reducing integration costs compared to solutions requiring standalone control panels.
- **Grid/off-grid switchover under 10 ms** - The switching time between grid-tied and off-grid operation is under 10 ms (confirmed in the HP3-40/50/60K S1 datasheet), meaning critical loads experience no perceptible power interruption.
- **Wide PV oversizing range** - Technical documentation indicates support for up to 200% PV oversizing relative to AC power output, with 5 MPPT trackers and two strings each, giving flexibility for large installations using half-cut or bifacial modules without losing conversion efficiency.
- **AFCI and Class II SPD protection** - Built-in arc-fault detection (AFCI) combined with Class II surge protection increases operational safety in commercial installations, reducing fire risk from DC insulation faults.


### Cons

- **Maximum DC voltage capped at 1100 V** - The PV input voltage range tops out at 1100 V (MPPT range 150-1000 V), while some competing commercial inverters in this class (e.g., Huawei, Sungrow) already support 1500 V, which can require additional string splitting and more DC wiring for longer bifacial/half-cut module strings.


## About this series

The Livoltek HP3 S1 series comprises three-phase hybrid inverters built for commercial installations and larger residential systems, where flexibility in managing PV and battery storage energy flows is essential. The series stands out for its **three-phase hybrid architecture** with a wide MPPT voltage range, allowing it to work well with diverse panel configurations, including modules using half-cut or bifacial cell technology. HP3 S1 addresses the scalability limitations of typical inverters by offering **two independent battery inputs**, enabling energy storage expansion without compromising charge and discharge management. A key advantage is the ability to run **parallel operation of up to 10 units**, opening the way to larger commercial installations without the need for separate control systems. The HP3 S1 also delivers **seamless switching between grid-tied and off-grid operation** in under 10 ms, which is critical for sites requiring uninterrupted power supply. Additionally, the inverters are equipped with **AFCI protection and Type II surge protection**, improving operational safety and reducing fire risk in the installation. This makes the series a solid choice for integrators and investors seeking a proven, scalable platform for energy storage deployment.


## Questions


### What is the maximum power output of the Livoltek HP3 S1 inverter series?

The HP3 S1 series consists of three-phase hybrid inverters with a scalable architecture, designed for commercial installations and larger residential systems. Thanks to the wide MPPT voltage range and parallel operation of up to 10 units, total system power can grow alongside the facility without replacing the central control system. Exact unit power ratings vary by model, so it's best to check the datasheet of the specific variant.


### Can the Livoltek HP3 S1 inverter connect to two separate battery storage systems?

Yes, the HP3 S1 features two independent battery inputs, allowing connection of two separate battery sets, even with different states of charge or age. Each input is managed independently, so expanding the energy storage doesn't require compromises in charging and discharging algorithms. This is particularly useful for phased expansion of commercial installations.


### How fast does the HP3 S1 switch to off-grid mode during a grid outage?

HP3 S1 series inverters switch between grid-tied and off-grid (island) operation in under 10 milliseconds. This transition is nearly imperceptible to connected loads, ensuring continuous operation for facilities requiring uninterrupted power, such as server rooms or cold storage, even during sudden grid voltage drops.


### Do Livoltek HP3 S1 inverters have fire protection for the PV installation?

Yes, the HP3 S1 series includes built-in AFCI protection, which detects electrical arc fault signatures in the current and automatically disconnects the system, reducing fire risk. The inverters also feature Class II surge protection, enhancing operational safety, which is especially important in commercial installations with long DC cable runs.


### Is the HP3 S1 compatible with bifacial and half-cut solar panels?

Yes, the three-phase hybrid architecture with a wide MPPT voltage range ensures good compatibility with various module configurations, including panels using half-cut and bifacial technologies. This allows integrators to design installations based on modern, higher-efficiency modules without concerns about string voltage mismatch.


### How many HP3 S1 units can be combined in a single commercial installation?

HP3 S1 series inverters support parallel operation of up to 10 units, enabling larger commercial installations to be built without separate control systems. This significantly simplifies scaling projects as power demand grows, while maintaining unified management across the entire system.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/1-2d03dab38625.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy 60M1-HYB](https://comparepv.com/inverter/sigenergy-60m1-hyb) | 60 kW | 98.3% |  | 105.0 kg | 25.0 kg heavier |
| [Sigenergy 60M1-HYA](https://comparepv.com/inverter/sigenergy-60m1-hya) | 60 kW | 98.3% |  | 75.0 kg | 5.0 kg lighter |
| [Deye SUN-60K-SG02HP3-EU-EM6](https://comparepv.com/inverter/deye-sun-60k-sg02hp3-eu-em6) | 60 kW | 98.1% | 6 | 105.0 kg | +1 MPPT, 25.0 kg heavier |
| [FoxESS H3-60-Plus](https://comparepv.com/inverter/foxess-h3-60-plus) | 60 kW | 98.1% |  | 115.0 kg | 35.0 kg heavier |
| [FoxESS P3-60-Plus](https://comparepv.com/inverter/foxess-p3-60-plus) | 60 kW | 98.1% |  | 115.0 kg | 35.0 kg heavier |
| [SRNE IESP600SH3](https://comparepv.com/inverter/srne-iesp600sh3) | 60 kW | 97.6% | 4 | 98.0 kg | -0.4 pp efficiency, -1 MPPT, 18.0 kg heavier |
| [INVT XD60KTR](https://comparepv.com/inverter/invt-xd60ktr) | 60 kW | 97.5% | 4 | 92.0 kg | -0.5 pp efficiency, -1 MPPT, 12.0 kg heavier |
| [Sunways STH-60KTL-HT](https://comparepv.com/inverter/sunways-sth-60ktl-ht) | 60 kW | 97.4% | 5 | 95.0 kg | -0.6 pp efficiency, 15.0 kg heavier |


---

Source: https://comparepv.com/inverter/livoltek-hp3-60ks1

