---
title: "Livoltek HP3-30KL1 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Livoltek HP3-30KL1 30 kW hybrid inverter. Specs: 98.0% European efficiency, 3 MPPT, 1100 V max DC input, 80.0 kg."
source: "https://comparepv.com/inverter/livoltek-hp3-30kl1"
updated: 2026-11-14
---

# Livoltek HP3-30KL1


## Identity

- **Manufacturer:** Livoltek
- **Model:** HP3-30KL1
- **Series:** LuminHybrid HP3-L1
- **Rated AC power:** 30 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 623 inverters from 12 to 30 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.0% | 98.0% | Typical | 167 |
| MPPT trackers | 3 | 2 | Strong - top 25% | 58 |
| Max DC input voltage | 1100 V | 1000 V | Strong - top 19% | 1 |
| Weight per kW | 2.7 | 1.8 | Weak - bottom 25% | 450 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 30 kW
- **Max apparent power:** 30.00 kVA
- **Phases:** Three-phase
- **Max AC current:** 83.3 A
- **Power factor:** 0.8 Leading to 0.8 Lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 60.00 kW
- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 150 to 850 V
- **MPPT trackers:** 3
- **Max input current per MPPT:** 45.0 A
- **Max short-circuit current per MPPT:** 55.0 A


### Efficiency

- **European efficiency:** 98.0 %
- **Max efficiency:** 98.4 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 120-680V
- **Max charge current:** 160.0 A
- **Max discharge current:** 160.0 A


### Physical

- **Dimensions:** 895 × 620 × 300 mm
- **Weight:** 80.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Noise:** 65 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 95 %
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** Wi-Fi, DO, DI, RS485, CAN
- **Protection:** AFCI, DC switch, Surge protection


### Pros

- **Sub-10 ms on/off-grid switchover** - Switchover time below 10 ms between grid-tied and off-grid operation effectively eliminates any noticeable voltage interruption for critical loads, placing the series among the fastest UPS-like hybrid solutions in the commercial segment.
- **Parallel operation up to 10 units** - Support for up to 10 units in parallel in both on-grid and off-grid modes (a feature also confirmed on other HP3 lines such as S1 and T2) enables scaling to multi-fold power capacity without switching hardware platforms, reducing design costs on larger projects.
- **Two independent battery inputs** - Two separate energy storage inputs allow staged expansion of the battery bank or mixing of different battery types, giving integrators flexibility rarely found in three-phase inverters of this power class.
- **Diesel genset compatibility and Class II protection** - Diesel generator support simplifies building hybrid systems in locations without stable grid power, while built-in AFCI arc-fault protection combined with Class II AC/DC SPDs meets the safety standards expected in commercial installations.


### Cons

- **Limited public documentation for L1** - Unlike other HP3 lines (D1, D2, T2, S1), a publicly available datasheet for the L1 variant is hard to find across distributor and aggregator databases (ENF Solar, sun.store), which can slow down parameter verification for installers before quoting a project.
- **Brand less established than segment leaders** - Livoltek has a considerably smaller global service network and shorter market track record than Tier-1 incumbents like Huawei, Sungrow, or SMA, which for integrators on large commercial projects can mean longer service response times in case of failure.


## About this series

The LuminHybrid HP3-L1 series is a three-phase hybrid inverter built for commercial installations and larger residential systems where both performance and resilience against power outages matter. The unit addresses the problem of unstable grids through **seamless switching between grid-tied and off-grid operation in under 10 ms**, meaning critical loads experience no interruption in power. Thanks to its high-voltage architecture and support for scalable energy storage, the inverter maximizes self-consumption and lowers energy costs for homes and industrial facilities alike. Configuration flexibility is enabled by **dual independent battery inputs**, allowing different storage units to be combined or the system to be expanded in stages. Installers will appreciate the ability to run **up to 10 units in parallel** for both grid-tied and off-grid operation, opening the door to high-power projects without switching hardware platforms. Another advantage is **diesel generator compatibility**, enabling integration of multiple energy sources within a single system. Operational safety is ensured by built-in **AFCI arc-fault protection** alongside Type II surge protection on both the AC and DC sides. This is a solution for investors and system integrators looking for an inverter ready to scale and perform reliably where power certainty is essential.


## Questions


### How is the LuminHybrid HP3-L1 different from typical hybrid inverters on the market?

The key difference is seamless switching between grid-tied and off-grid operation in under 10 ms. In practice, critical loads such as servers, cold storage, or production lines experience no voltage interruption during a grid outage. Most hybrid inverters need tens of milliseconds or even seconds to switch, which can cause restarts or data loss for sensitive equipment.


### How many energy storage units can be connected to the LuminHybrid HP3-L1 inverter?

The inverter has two independent battery inputs, allowing two separate storage units to be connected, even from different manufacturers or with different capacities. This lets installers expand storage capacity in stages instead of buying the full target capacity upfront, or combine older and newer batteries in one system without replacing the entire setup.


### Can several HP3-L1 inverters be combined into one larger installation?

Yes, the HP3-L1 series supports parallel operation of up to 10 units, both in grid-tied and off-grid mode. This is especially useful in commercial projects where power demand exceeds the capacity of a single unit. An investor can start with one inverter and add more units on the same hardware platform as the facility's power needs grow.


### Is the LuminHybrid HP3-L1 compatible with a diesel generator?

Yes, the inverter is compatible with diesel generators, enabling integration of multiple energy sources in one system: solar PV, battery storage, and a backup generator. This is particularly important for industrial and commercial facilities that need guaranteed power supply even during extended grid outages, when batteries alone are not sufficient.


### What safety protections does the HP3-L1 have, and is it suitable for commercial use?

The inverter has built-in AFCI arc-fault protection, which detects and interrupts dangerous electrical arcs caused by, for example, damaged DC wiring. It also includes Type II surge protection on both the AC and DC sides, shielding the electronics from voltage spikes caused by lightning or grid disturbances. This level of protection is standard for commercial and industrial installations.


### What warranty does the LuminHybrid HP3-L1 come with, and can it be extended?

Livoltek typically offers a multi-year warranty on HP3 series inverters, generally in the 5-10 year range depending on the model and market, with extension options available through authorized distributors. Since exact warranty terms for the HP3-L1 can vary by country of purchase, it's worth confirming current conditions with the seller before buying.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/DS_HP3-3035KL1-6fe9fa3cdbf6.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [HYXiPower HYX-H30K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h30k-hsa2) | 30 kW | 98.2% |  | 38.0 kg | 42.0 kg lighter |
| [Afore AF30K-TH](https://comparepv.com/inverter/afore-af30k-th) | 30 kW | 98.1% | 2 | 36.0 kg | -1 MPPT, 44.0 kg lighter |
| [Deye SUN-30K-SG02HP3-EU-AM3](https://comparepv.com/inverter/deye-sun-30k-sg02hp3-eu-am3) | 30 kW | 98.0% | 3 | 46.0 kg | 34.0 kg lighter |
| [Sigenergy SigenStor EC 30.0 TP](https://comparepv.com/inverter/sigenergy-sigenstor-ec-30-0-tp) | 30 kW | 98.0% |  | 36.0 kg | 44.0 kg lighter |
| [Sigenergy Sigen Hybrid 30.0 TP](https://comparepv.com/inverter/sigenergy-sigen-hybrid-30-0-tp) | 30 kW | 98.0% |  | 36.0 kg | 44.0 kg lighter |
| [Solplanet ASW030K-TH](https://comparepv.com/inverter/solplanet-asw030k-th) | 30 kW | 97.9% | 4 | 58.0 kg | +1 MPPT, 22.0 kg lighter |
| [SolaX X3-ULT-30K](https://comparepv.com/inverter/solax-x3-ult-30k) | 30 kW | 97.7% | 2 | 48.5 kg | -1 MPPT, 31.5 kg lighter |
| [SAJ H2-30K-T3](https://comparepv.com/inverter/saj-h2-30k-t3) | 30 kW | 97.6% | 3 | 50.0 kg | -0.4 pp efficiency, 30.0 kg lighter |


---

Source: https://comparepv.com/inverter/livoltek-hp3-30kl1

