---
title: "Kehua SPI6K-B Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "Kehua SPI6K-B 6 kW grid-tie inverter. Specs: 98.0% European efficiency, 2 MPPT, 1000 V max DC input, 18.5 kg."
source: "https://comparepv.com/inverter/kehua-spi6k-b"
updated: 2026-11-14
---

# Kehua SPI6K-B


## Identity

- **Manufacturer:** Kehua
- **Model:** SPI6K-B
- **Series:** SPI-B
- **Rated AC power:** 6 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 1,005 inverters from 3 to 6 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.0% | 97.1% | Strong - top 6% | 36 |
| MPPT trackers | 2 | 2 | Typical | 59 |
| Max DC input voltage | 1000 V | 600 V | Strong - top 16% | 75 |
| Weight per kW | 3.1 | 3.9 | Typical | 340 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 6 kW
- **Max AC power:** 6.60 kW
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 9.6 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 (leading)~0.8 (lagging)
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 200 to 950 V
- **Start-up voltage:** 200 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 13.0 A


### Efficiency

- **European efficiency:** 98.0 %
- **Max efficiency:** 98.5 %


### Physical

- **Dimensions:** 420 × 480 × 180 mm
- **Weight:** 18.5 kg
- **Enclosure:** IP65
- **Cooling:** natural
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, WiFi, GPRS, DRM
- **Protection:** DC switch, Surge protection


### Warranty and certificates

- **Certifications:** EN62109-1, EN62109-2, AS/NZS4777.2: 2015, EN 61000-6-2, EN 61000-6-3, EN50549-1, IEC 62116:2014, IEC 61727: 2004, IEC 60068-2-1: 2007, IEC 60068-2-2: 2007, IEC60068-2-14: 2009, IEC61683 (ed.1), CEI021


### Pros

- **Sealed IP65 enclosure** - Manufacturer documentation confirms IP65 protection, allowing outdoor mounting without additional rain or dust shielding, reducing installation costs compared to models requiring extra canopies (e.g., IP54 units).
- **Fanless cooling design** - The cast-aluminum enclosure dissipates heat via natural convection, eliminating the component most prone to failure in string inverters (the fan), resulting in longer trouble-free operation and silent performance.
- **Smart I-V curve diagnostics** - Automatic detection of faulty or underperforming PV modules shortens fault localization time and downtime - a feature rarely found in inverters of this power class from tier-2 manufacturers.
- **Flexible dual MPPT configuration** - Two independent MPPT trackers (e.g., 2x11-13 A per the SPI5-15K-B datasheet) allow strings of different orientation or shading to be connected without significant yield loss, a common standard for residential and small commercial segments.
- **Remote monitoring and OTA updates** - RS485, WiFi, and GPRS connectivity with remote firmware updates let installers service units without a site visit, cutting post-deployment maintenance costs.


### Cons

- **Discontinued production** - The SPI-B series has been phased out in favor of newer Kehua lines (e.g., SPI-B X2 and SPI-B2), meaning limited availability of spare parts, warranty service, and technical support over the long operating life of the installation.
- **Only 2 MPPT trackers on lower-power models** - The 5-15 kW variants feature only 2 independent MPPT trackers, while competing tier-1 inverters in this segment (e.g., Huawei, Sungrow) more often offer 3-4 MPPTs, limiting design flexibility for roofs with multiple orientations.


## About this series

The Kehua SPI-B series consists of three-phase string inverters built for residential and small commercial installations where both energy yield and resilience to demanding operating conditions matter. The units feature **two independent MPPT trackers**, allowing flexible configuration of PV strings with different orientations or partial shading without sacrificing energy harvest. Thanks to its **IP65-rated enclosure**, the inverter can be mounted both indoors and outdoors without the need for additional weather protection against rain or dust. The robust **die-cast aluminum alloy chassis** ensures effective heat dissipation without a fan and supports long, trouble-free operation measured in decades. The series also stands out with its **I&V intelligent diagnostics** feature, which automatically detects and pinpoints faulty or underperforming PV modules, simplifying maintenance and reducing system downtime. The inverter further offers **remote monitoring and management** via RS485, WiFi, or GPRS, along with over-the-air firmware updates. Low current harmonic distortion and a wide grid voltage range make this series grid-friendly, while installers and investors benefit from simple wall-mounted installation and predictable, stable performance throughout the system's lifetime.


## Questions


### Is the Kehua SPI-B inverter series still available for purchase?

The Kehua SPI-B series has been discontinued and is no longer offered as a new product through regular sales channels. Only remaining distributor stock may still be found. Owners expanding an existing SPI-B installation should contact support to check spare parts availability and review Kehua's current replacement models.


### What is the advantage of two independent MPPT trackers in the Kehua SPI-B compared to a single-tracker inverter?

Two independent MPPT channels let you split panels into two groups operating separately, for example with different orientations or shading levels. This way, a production drop on one string caused by shading from a chimney does not affect the other string's output. With a single-tracker inverter, that same issue would reduce the yield of the entire array.


### Can the Kehua SPI-B inverter be installed outdoors without extra weather protection?

Yes, the enclosure carries an IP65 rating, providing full protection against dust and water jets from any direction. The inverter can be mounted on a facade, in a garage, or under a carport without building additional shelter. The die-cast aluminum housing also protects the electronics and supports fanless cooling, reducing failure risk associated with moving parts collecting dust.


### How does the intelligent I-V diagnostics feature work in the Kehua SPI-B, and does it require extra sensors?

The I-V diagnostics function analyzes string current-voltage curves in real time and automatically detects panels that are damaged, soiled, or underperforming, pinpointing their location without needing additional sensors. Data is available remotely through the monitoring app, significantly shortening service diagnosis time and allowing maintenance to be scheduled before overall system output drops.


### What remote monitoring options does the Kehua SPI-B inverter offer?

The inverter supports communication via RS485, WiFi, or GPRS, letting homeowners and installers track energy production, individual string status, and operating history remotely from a phone or computer. Firmware can also be updated remotely, eliminating the need for an on-site service visit and making it easier to roll out fixes and new features throughout the inverter's lifetime.


### Is the Kehua SPI-B inverter suitable for a single-family home with a three-phase grid connection?

Yes, the SPI-B is a three-phase string inverter designed specifically for residential and small commercial installations. Low current harmonic distortion and a wide tolerated grid voltage range make it easier to meet grid operator requirements for microgeneration connections. Simple wall mounting and fanless operation further reduce installation costs and noise in residential settings.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/60cfedd2e3f74-9bf929d28659.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolarEdge SE6000H (HD‑Wave, single phase)](https://comparepv.com/inverter/solaredge-solaredge-se6000h-hd-wave-single-phase) | 6 kW | 99.0% |  | 10.6 kg | +1.0 pp efficiency, 7.9 kg lighter |
| [SolarEdge EV Charging Single Phase Inverter SE6000H (aka H6000SE / SE6000H)](https://comparepv.com/inverter/solaredge-solaredge-ev-charging-single-phase-inverter-se6000h-aka-h6000se-se6000h) | 6 kW | 99.0% |  | 11.9 kg | +1.0 pp efficiency, 6.6 kg lighter |
| [INVT XG6KTR-S](https://comparepv.com/inverter/invt-xg6ktr-s) | 6 kW | 98.3% | 2 | 12.0 kg | 6.5 kg lighter |
| [Afore BNT006KTL](https://comparepv.com/inverter/afore-bnt006ktl) | 6 kW | 98.0% | 2 | 16.0 kg | 2.5 kg lighter |
| [StecaGrid 6013](https://comparepv.com/inverter/steca-stecagrid-6013) | 6 kW | 98.0% | 1 | 12.0 kg | -1 MPPT, 6.5 kg lighter |
| [Sunways STT-6KTL-P](https://comparepv.com/inverter/sunways-stt-6ktl-p) | 6 kW | 98.0% | 2 | 23.0 kg | 4.5 kg heavier |
| [Afore HNS6000TL](https://comparepv.com/inverter/afore-hns6000tl) | 6 kW | 97.9% | 2 | 10.0 kg | 8.5 kg lighter |
| [Solplanet ASW6K-LT-G2 Pro](https://comparepv.com/inverter/solplanet-asw6k-lt-g2-pro) | 6 kW | 97.9% | 2 | 16.0 kg | 2.5 kg lighter |


---

Source: https://comparepv.com/inverter/kehua-spi6k-b

