---
title: "KACO gridsave 150 TL3-S GEN2 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "KACO gridsave 150 TL3-S GEN2 150 kW hybrid inverter. Specs: 1450 V max DC input, 80.0 kg."
source: "https://comparepv.com/inverter/kaco-gridsave-150-tl3-s-gen2"
updated: 2026-11-14
---

# KACO gridsave 150 TL3-S GEN2


## Identity

- **Manufacturer:** KACO
- **Model:** gridsave 150 TL3-S GEN2
- **Series:** blueplanet gridsave GEN2
- **Rated AC power:** 150 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 238 inverters from 100 to 500 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 98.5% |  |  |
| MPPT trackers | - | 8 |  |  |
| Max DC input voltage | 1450 V | 1100 V | Typical | 110 |
| Weight per kW | 0.5 | 0.7 | Typical | 79 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 150 kW
- **Max apparent power:** 150.00 kVA
- **Phases:** Three-phase
- **Max AC current:** 132.3 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0 – 100% Smax / 0.30 ind. – 0.30 cap.
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 1450 V
- **Max input current per MPPT:** 145.0 A
- **Max short-circuit current per MPPT:** 300.0 A


### Efficiency

- **Max efficiency:** 98.9 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 668-1450 V
- **Max charge current:** 145.0 A
- **Max discharge current:** 145.0 A


### Physical

- **Dimensions:** 699 × 719 × 450 mm
- **Weight:** 80.0 kg
- **Enclosure:** IP66 / NEMA 4X
- **Cooling:** forced-air
- **Noise:** 60 dB
- **Operating temperature:** -20 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 3000 m


### Connectivity and protection

- **Interfaces:** Ethernet, Display
- **Protocols:** TCP/IP, Modbus TCP, Ethernet, USB
- **Protection:** Surge protection


### Warranty and certificates

- **Certifications:** IEC 62477:2022, EN 62109-1, EN 62109-2


### Pros

- **Extended DC voltage window up to 1,450 V** - GEN2 raises the maximum DC voltage to 1,450 V (versus roughly 1,315 V on the prior TL3-S generation), enabling longer battery strings, lower conduction losses, and simpler configuration for commercial/industrial storage systems.
- **High efficiency through SiC technology** - SiC-based power electronics push maximum efficiency to 98.9%, a clear improvement over GEN1 (around 98.5-98.7% on the 92-137 kW models), translating into lower round-trip energy losses.
- **Bidirectional grid-following operation** - The inverter handles simultaneous charging and discharging in real time, making it directly applicable to peak shaving, energy arbitrage, and grid balancing without additional management hardware.
- **Reinforced cybersecurity for Modbus TCP/Sunspec** - For remote battery storage fleet management, strengthened communication security reduces the risk of unauthorized access to operating parameters, which is increasingly relevant under tightening EU cybersecurity requirements (e.g., NIS2).
- **Three M/L/XL variants tailored to project needs** - Differentiated DC protection levels (fuse, contactor, pre-charge circuit) across three variants let investors choose the protection level needed without paying for unused features in simpler projects.


### Cons

- **Limited single-unit power vs. utility-scale rivals** - Maximum output per unit in the 92-137 kVA class is significantly lower than utility-scale competitors such as Sungrow (e.g., SC2500UD-MV at ~2.5 MVA per block), requiring multiple KACO units in parallel for large storage projects and increasing BoS complexity and cost.


## About this series

The blueplanet gridsave GEN2 series is the second generation of KACO's industrial battery inverters, built for commercial and industrial energy storage installations. The key upgrade over the previous generation is an **extended DC voltage window up to 1450 V**, giving system designers greater flexibility in battery configuration while reducing losses on the DC side. These units operate as a **bidirectional battery inverter** handling both charging and discharging in grid-following mode, making them a natural fit for peak shaving, grid balancing, and integration with photovoltaic systems. Digital security has been strengthened through **enhanced cybersecurity** for the Modbus TCP/Sunspec-based communication, which matters when managing a fleet of storage assets remotely. The transformerless design and IP66-rated enclosure allow outdoor installation in demanding environments, while **three hardware variants, M, L, and XL**, differentiate the DC protection scope (fuse, contactor, pre-charge circuit) to match project requirements. The series also follows a future-proof certification roadmap aligned with evolving grid codes, helping investors plan long-term deployments without the risk of the hardware becoming quickly outdated.


## Questions


### How does the blueplanet gridsave GEN2 differ from the previous generation of KACO battery inverters?

The key change is the extended DC voltage window up to 1450 V, which allows more flexible battery string configurations and reduces losses during power transfer. KACO also strengthened cybersecurity for Modbus TCP/Sunspec communication, which matters for remote fleet management of energy storage systems. This is a substantial upgrade for commercial and industrial BESS projects, not just a cosmetic rebrand.


### What is the difference between the M, L, and XL variants of the blueplanet gridsave GEN2 series?

The M, L, and XL variants differ in the scope of DC-side protection, such as fuse, contactor, and pre-charge circuit. A higher-tier variant offers more comprehensive protection for the battery installation, which matters for larger storage systems or projects with stricter safety requirements. The right choice depends on project scale and local codes, so it's worth consulting an integrator.


### Can the blueplanet gridsave GEN2 inverter be installed outdoors?

Yes, the units use a transformerless design with an IP66-rated enclosure, allowing outdoor installation even in harsh environmental conditions, such as containerized energy storage systems. This eliminates the need for a dedicated technical room, reducing overall installation costs.


### What applications is the blueplanet gridsave GEN2 inverter suited for - peak shaving or PV integration?

The inverter operates as a bidirectional battery inverter handling simultaneous charging and discharging in grid-following mode, making it suitable for peak shaving, grid balancing, and integration with PV systems. It's a versatile solution for commercial and industrial energy storage, removing the need for a separate dedicated PV inverter.


### Is the blueplanet gridsave GEN2 compliant with current and upcoming grid codes?

Yes, the series follows a grid certification roadmap aligned with evolving regulations, meaning the units are prepared for updates to interconnection standards across different markets. This lets investors plan long-term deployments without the risk of the hardware quickly becoming non-compliant with new utility requirements.


### How secure is remote communication for the blueplanet gridsave GEN2 when managing a fleet of storage systems?

The second-generation gridsave introduces enhanced cybersecurity for Modbus TCP/Sunspec communication. This is especially important for remote monitoring and management of multiple energy storage systems simultaneously, where the risk of unauthorized access is higher than with a single local installation.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/indexphp-91847d7f2798.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [ATESS HPS150HV](https://comparepv.com/inverter/atess-hps150hv) | 150 kW |  | 2 |  | Similar on paper |
| [ATESS HPS150](https://comparepv.com/inverter/atess-hps150) | 150 kW |  |  | 1230.0 kg | 1150.0 kg heavier |
| [ATESS HPS150-US](https://comparepv.com/inverter/atess-hps150-us) | 150 kW |  |  | 1200.0 kg | 1120.0 kg heavier |
| [KACO gridsave 137 TL3-S GEN2](https://comparepv.com/inverter/kaco-gridsave-137-tl3-s-gen2) | 137 kW |  |  | 80.0 kg | -13.0 kW |
| [Sigenergy 125M1-HYB](https://comparepv.com/inverter/sigenergy-125m1-hyb) | 125 kW | 98.3% |  | 108.0 kg | -25.0 kW, 28.0 kg heavier |
| [Sigenergy 125M1-HYA](https://comparepv.com/inverter/sigenergy-125m1-hya) | 125 kW | 98.3% |  | 95.0 kg | -25.0 kW, 15.0 kg heavier |
| [Deye SUN-125K-SG02HP3-EU-GM10](https://comparepv.com/inverter/deye-sun-125k-sg02hp3-eu-gm10) | 125 kW | 98.1% | 10 | 161.7 kg | -25.0 kW, 81.7 kg heavier |
| [FoxESS H3-125-Plus](https://comparepv.com/inverter/foxess-h3-125-plus) | 125 kW | 98.1% |  | 120.0 kg | -25.0 kW, 40.0 kg heavier |


---

Source: https://comparepv.com/inverter/kaco-gridsave-150-tl3-s-gen2

