---
title: "HYXiPower HYX-S22K-LT Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "HYXiPower HYX-S22K-LT 22 kW grid-tie inverter. Specs: 98.5% European efficiency, 800 V max DC input, 44.0 kg."
source: "https://comparepv.com/inverter/hyxipower-hyx-s22k-lt"
updated: 2026-11-14
---

# HYXiPower HYX-S22K-LT


## Identity

- **Manufacturer:** HYXiPower
- **Model:** HYX-S22K-LT
- **Series:** HYX-S-LT
- **Rated AC power:** 22 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 623 inverters from 12 to 30 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.5% | 98.0% | Strong - top 4% | 9 |
| MPPT trackers | - | 2 |  |  |
| Max DC input voltage | 800 V | 1000 V | Weak - bottom 15% | 488 |
| Weight per kW | 2.0 | 1.8 | Typical | 331 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 22 kW
- **Max apparent power:** 24.20 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 220 V
- **Max AC current:** 63.5 A
- **Grid frequency:** 60 Hz
- **Power factor:** 0.8 leading...0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 35.20 kW
- **Max DC voltage:** 800 V
- **MPPT voltage range:** 140 to 800 V
- **Start-up voltage:** 160 V
- **Max input current per MPPT:** 40.0 A
- **Max short-circuit current per MPPT:** 50.0 A


### Efficiency

- **European efficiency:** 98.5 %
- **Max efficiency:** 98.8 %


### Physical

- **Dimensions:** 460 × 615 × 268 mm
- **Weight:** 44.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Operating temperature:** -30 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, 4G, Wi-Fi, HPLC
- **Protection:** AFCI, DC switch, Surge protection


### Pros

- **AI-assisted dynamic MPPT** - The AI-based maximum power point tracking algorithm reduces energy losses under partial shading or uneven string irradiance, which in commercial installations with complex roof geometry can meaningfully increase annual yield compared to classic perturb-and-observe algorithms.
- **Built-in PID recovery function** - The PID recovery function runs cyclically (e.g., overnight) and counteracts potential-induced degradation, limiting PV module power loss over time and extending system lifetime without requiring a separate, external anti-PID device.
- **Compact IP66-rated enclosure** - The IP66 ingress protection rating allows outdoor installation in high-dust and high-humidity conditions, and the unit's light weight simplifies transport and mounting compared to the heavier, all-metal enclosures of competing three-phase inverters in this power class.
- **AFCI with 0.5 s shutdown time** - Arc-fault detection with 0.5 s shutdown aligns with safety requirements for commercial installations (e.g., NEC 690.11) and, combined with Type II DC/AC surge protection on both sides, increases system resilience against arc-fault fires.
- **Remote monitoring and OTA updates** - Configuration via mobile app and OTA firmware updates enable remote diagnostics and servicing without an on-site technician visit, shortening service response times and lowering maintenance costs for operators managing multiple sites.


### Cons

- **Limited manufacturer track record** - HYXiPower is a relatively young, Tier-2 manufacturer without the established market position of Huawei, Sungrow, or SMA - publicly available sources (datasheets, reviews) lack long-term failure-rate data for the HYX-S-LT series in commercial deployments, which is a meaningful uncertainty factor for investors assessing service risk over a 10-20 year horizon.
- **No publicly available independent certifications/tests** - Unlike Tier-1 competitors, no published independent efficiency test results (e.g., CEC, TÜV Rheinland) or broad industry reviews were found for the HYX-S-LT series - assessment of conversion efficiency and real-world yield relies mainly on manufacturer-provided data.


## About this series

The HYX-S-LT series comprises three-phase string inverters ranging from 15 to 30 kW, built for commercial and industrial installations where reliability and ease of installation matter equally. The lineup stands out with **AI-driven dynamic MPPT tracking**, which meaningfully boosts energy yield even under partial shading or uneven string irradiance. Thanks to the **built-in PID recovery function**, these units effectively counteract PV module degradation, extending the lifespan and stability of the entire system over time. The inverters come housed in a **compact, lightweight enclosure rated IP66**, allowing installation both indoors and outdoors without concern for moisture or dust ingress. System safety is reinforced by **AFCI arc-fault detection with a rapid 0.5-second shutdown**, along with Type II surge protection on both the DC and AC sides. Installers will appreciate the straightforward commissioning via a mobile app and remote monitoring with OTA updates, which simplifies servicing and fault diagnostics without requiring an on-site visit. This is a solution for installers seeking a proven, rigorously tested design that combines high efficiency with low operating costs at mid-scale power levels.


## Questions


### What is the power range of the HYX-S-LT inverters and what installations are they suited for?

The HYX-S-LT series covers three-phase string inverters ranging from 15 to 30 kW. This power range makes them well suited to commercial and industrial installations, such as production halls, warehouses, or service buildings, where higher output than residential microinstallations is needed, while still keeping installation and service straightforward.


### What does AI-based dynamic MPPT tracking provide in the HYX-S-LT inverters?

The AI-assisted MPPT algorithm continuously analyzes string operating conditions and adjusts the maximum power point faster than conventional methods. In practice this results in higher energy yield, especially when some panels are partially shaded or unevenly irradiated, for example due to chimneys, trees, or nearby buildings.


### Does the HYX-S-LT inverter protect panels against PID degradation?

Yes, the units include a built-in PID recovery function that actively counteracts potential-induced degradation in PV modules. This helps panels retain their original power output over time and keeps the whole system more stable over the years, which matters a lot in large commercial arrays billed based on energy yield.


### Can HYX-S-LT inverters be mounted outdoors?

Yes, the enclosure has an IP66 protection rating, making it resistant to moisture, rain, and dust. It can be installed either indoors, for example in a technical switchroom, or outdoors on a facade or hall wall, giving installers more flexibility in choosing the mounting location without extra enclosures.


### How does AFCI protection work in HYX-S-LT inverters and why is it needed?

AFCI, or arc-fault circuit detection, monitors DC-side current waveforms to identify unusual disturbances that may indicate a damaged connection or cable. When an arc is detected, the inverter shuts down within 0.5 seconds, significantly reducing fire risk in the installation, especially in large commercial systems with many strings.


### What does day-to-day configuration and servicing of the HYX-S-LT inverter look like?

Commissioning and configuration are done through a mobile app, with no additional diagnostic equipment required. Remote monitoring and OTA updates let installers check operating parameters and deploy new firmware without an on-site visit, significantly shortening service response times for commercial installations spread across multiple locations.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/DS_HYX-S15-30K-LT_Datasheet_V14-20260623_EN-ea7abc8bdc26.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Growatt MID 22KTL3-X](https://comparepv.com/inverter/growatt-mid-22ktl3-x) | 22 kW | 98.6% | 2 | 23.0 kg | 21.0 kg lighter |
| [Hopewind hopeSun 22KTL](https://comparepv.com/inverter/hopewind-hopesun-22ktl) | 22 kW | 98.3% | 2 | 30.0 kg | 14.0 kg lighter |
| [SOFAR 22KTLX-G3](https://comparepv.com/inverter/sofar-solar-sofar-22ktlx-g3) | 22 kW | 98.2% | 2 | 23.0 kg | 21.0 kg lighter |
| [Deye SUN-22K-G05](https://comparepv.com/inverter/deye-sun-22k-g05) | 22 kW | 98.0% | 2 | 20.0 kg | -0.5 pp efficiency, 24.0 kg lighter |
| [INVT XG22KTR](https://comparepv.com/inverter/invt-xg22ktr) | 22 kW | 98.0% | 2 | 24.0 kg | -0.5 pp efficiency, 20.0 kg lighter |
| [Deye SUN-22K-G06P3-EU-AM2](https://comparepv.com/inverter/deye-sun-22k-g06p3-eu-am2) | 22 kW | 97.7% | 2 | 16.0 kg | -0.8 pp efficiency, 28.0 kg lighter |
| [SAJ R6-22K-T2-32](https://comparepv.com/inverter/saj-r6-22k-t2-32) | 22 kW |  |  |  | Similar on paper |
| [Fronius Symo Advanced 22.7-3 480](https://comparepv.com/inverter/fronius-international-fronius-symo-advanced-22-7-3-480) | 22.73 kW |  | 2 | 43.4 kg | +0.7 kW |


---

Source: https://comparepv.com/inverter/hyxipower-hyx-s22k-lt

