---
title: "Hopewind HSNV110K-G03 Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "Hopewind HSNV110K-G03 110 kW grid-tie inverter. Specs: 98.4% European efficiency, 4 MPPT, 1100 V max DC input, 76.0 kg."
source: "https://comparepv.com/inverter/hopewind-hsnv110k-g03"
updated: 2026-11-14
---

# Hopewind HSNV110K-G03


## Identity

- **Manufacturer:** Hopewind
- **Model:** HSNV110K-G03
- **Series:** HSNV-G03
- **Rated AC power:** 110 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 238 inverters from 100 to 500 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.4% | 98.5% | Typical | 96 |
| MPPT trackers | 4 | 8 | Weak - bottom 22% | 137 |
| Max DC input voltage | 1100 V | 1100 V | Typical | 113 |
| Weight per kW | 0.7 | 0.7 | Typical | 135 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 110 kW
- **Max AC power:** 121.00 kW
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 174.7 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading~0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 200 to 1000 V
- **Start-up voltage:** 200 V
- **MPPT trackers:** 4
- **Max input current per MPPT:** 65.0 A
- **Max short-circuit current per MPPT:** 100.0 A


### Efficiency

- **European efficiency:** 98.4 %
- **Max efficiency:** 98.7 %


### Physical

- **Dimensions:** 657 × 953 × 385 mm
- **Weight:** 76.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Operating temperature:** -25 to 60 °C
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, Wi-Fi, PLC
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** IEC 62109, IEC 61000, IEC 62920, IEC 61727, IEC 62116, IEC 60068, IEC 61683, EN 50549-1, EN 50549-2


### Pros

- **4 MPPT trackers at 65A, full 180/210mm compatibility** - Four independent MPPT trackers rated at 65A each (100A short-circuit current) enable flexible string design with modern 180mm and 210mm modules, important for large rooftop and ground-mount PV farms with irregular shading.
- **High conversion efficiency** - Maximum efficiency of 98.70% and European efficiency of 98.40% (V2.9 datasheet) place the series in the upper tier of the 60-110kW C&I segment, minimizing DC/AC conversion losses.
- **Advanced grid safety features** - Built-in AFCI for arc fault detection, PID recovery to protect modules against potential-induced degradation, and zero export function for grid compliance - rarely combined together in a single unit at this power class.
- **Resilience to harsh environmental conditions** - IP66 enclosure rating and C4 corrosion class (C5 optional) enable installation in industrial halls and sites exposed to moisture, dust, or coastal conditions without additional protective housing.
- **Lower wiring and integration costs** - Support for aluminum cables up to 240mm2 plus dual RS485 communication reduce BoS costs and simplify integration with SCADA/monitoring systems in large-scale PV projects.


### Cons

- **Limited field track record** - Launched in 2023, the series has a shorter operational track record than established tier-1 manufacturers (Huawei, Sungrow, SMA), which may matter for commercial projects requiring 20+ year bankability.
- **Unconfirmed BNEF Tier 1 status** - No verification could be found that Hopewind appears on the Bloomberg NEF Tier 1 inverter list, unlike some competing C&I brands, which may affect requirements set by institutional investors and financing banks.


## About this series

The HSNV-G03 series is a line of three-phase grid-tied inverters from Hopewind built for commercial and industrial (C&I) PV installations in the 60-110 kW power range, where reliable performance under heavy load and minimal downtime are essential. The inverter features **4 independent MPPTs** with high current capacity, ensuring full compatibility with modern 180 and 210 mm module formats and giving installers flexibility when designing strings for large rooftops and ground-mount PV farms. A transformerless topology combined with smart air cooling allows the unit to maintain full-load output even at elevated ambient temperatures, translating into higher real-world energy yield in demanding climates. System safety is reinforced by a built-in **AFCI** function that detects arc faults, intelligent string detection, and PID recovery that protects modules from potential-induced degradation. A rugged **IP66 enclosure** paired with C4 (optionally C5) anti-corrosion protection makes the series suitable for both industrial facilities and installations exposed to harsh environmental conditions. The available **zero export function** simplifies compliance with grid operator requirements, while dual RS485 communication and support for aluminum cabling up to 240 mm2 lower both wiring and monitoring integration costs. It's a practical choice for installers seeking an efficient, safe, and cost-effective inverter for large-scale PV projects.


## Questions


### What is the maximum PV power that can be connected to the HSNV-G03 inverter?

The HSNV-G03 series covers models rated at 60-110 kW and, thanks to 4 independent high-current MPPT trackers, supports DC/AC oversizing within limits defined for the specific model in its datasheet. The inverter is fully compatible with modern 180 mm and 210 mm format modules, allowing flexible string design even with high-power panels.


### Is the Hopewind HSNV-G03 inverter suitable for outdoor installation in harsh weather conditions?

Yes, the enclosure is rated IP66 with C4 anticorrosion class, optionally C5, meaning resistance to dust, heavy rain, and aggressive environments such as coastal or industrial sites. This allows installation both inside facilities and outdoors without extra protective canopies.


### What is the zero export feature on the HSNV-G03 and is it required?

Zero export limits or fully blocks power fed back into the distribution grid, a common requirement for commercial installations where the grid operator does not permit power export. In the HSNV-G03 this feature is built-in and software-activated, with no extra hardware needed, simplifying compliance with grid connection requirements.


### Does the HSNV-G03 lose power output at high ambient temperatures?

Not under normal operating conditions. Intelligent air cooling combined with the transformerless topology is designed to keep the inverter running at full rated power even in hot climates, resulting in higher real-world energy yield compared to units that derate under thermal stress.


### What protection features does the HSNV-G03 series offer against faults and module degradation?

The inverter includes AFCI arc-fault detection to reduce DC fire risk, intelligent string detection for faster fault diagnosis, and PID recovery that counteracts potential-induced degradation, restoring full output on modules affected by this effect.


### What wiring and communication options does the HSNV-G03 support for monitoring system integration?

The inverter supports aluminum cables up to 240 mm2, reducing wiring costs in large installations, plus dual RS485 communication enabling master-slave configuration and easy integration with SCADA monitoring systems typically used in C&I projects.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/17936018256534ws4sg-44b5e81b2dfd.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [KACO 110 TL3-US](https://comparepv.com/inverter/kaco-110-tl3-us) | 110 kW | 98.8% | 1 | 78.2 kg | +0.4 pp efficiency, -3 MPPT, 2.2 kg heavier |
| [Ginlong Solis S5-GC110K](https://comparepv.com/inverter/ginlong-solis-s5-gc110k) | 110 kW | 98.6% | 10 | 91.0 kg | +6 MPPT, 15.0 kg heavier |
| [Solis-110K-HV-5G](https://comparepv.com/inverter/ginlong-solis-solis-110k-hv-5g) | 110 kW | 98.5% | 9 | 82.0 kg | +5 MPPT, 6.0 kg heavier |
| [SAJ C6-110K-T12-40](https://comparepv.com/inverter/saj-c6-110k-t12-40) | 110 kW | 98.5% |  | 98.0 kg | 22.0 kg heavier |
| [FIMER PVM-110-TL](https://comparepv.com/inverter/fimer-pvm-110-tl) | 110 kW | 98.5% | 12 | 90.0 kg | +8 MPPT, 14.0 kg heavier |
| [INVT XG110KTR-F](https://comparepv.com/inverter/invt-xg110ktr-f) | 110 kW | 98.5% | 12 | 98.0 kg | +8 MPPT, 22.0 kg heavier |
| [Growatt MAX 110KTL3-X LV](https://comparepv.com/inverter/growatt-max-110ktl3-x-lv) | 110 kW | 98.4% | 10 | 84.0 kg | +6 MPPT, 8.0 kg heavier |
| [SMA Solar Sunny Tripower CORE2 STP 110-60](https://comparepv.com/inverter/sma-solar-sunny-tripower-core2-stp-110-60) | 110 kW | 98.4% | 12 | 93.5 kg | +8 MPPT, 17.5 kg heavier |


---

Source: https://comparepv.com/inverter/hopewind-hsnv110k-g03

