---
title: "Hopewind hopeSun 110KTL Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "Hopewind hopeSun 110KTL 110 kW grid-tie inverter. Specs: 98.3% European efficiency, 4 MPPT, 1100 V max DC input, 89.0 kg."
source: "https://comparepv.com/inverter/hopewind-hopesun-110ktl"
updated: 2026-11-14
---

# Hopewind hopeSun 110KTL


## Identity

- **Manufacturer:** Hopewind
- **Model:** hopeSun 110KTL
- **Series:** hopeSun KTL
- **Rated AC power:** 110 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 238 inverters from 100 to 500 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.3% | 98.5% | Typical | 113 |
| MPPT trackers | 4 | 8 | Weak - bottom 22% | 137 |
| Max DC input voltage | 1100 V | 1100 V | Typical | 113 |
| Weight per kW | 0.8 | 0.7 | Weak - bottom 18% | 193 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 110 kW
- **Max AC power:** 121.00 kW
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 174.6 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading~0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 165.00 kW
- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 200 to 1000 V
- **Start-up voltage:** 200 V
- **MPPT trackers:** 4
- **Max input current per MPPT:** 65.0 A
- **Max short-circuit current per MPPT:** 100.0 A


### Efficiency

- **European efficiency:** 98.3 %
- **Max efficiency:** 98.6 %


### Physical

- **Dimensions:** 670 × 800 × 330 mm
- **Weight:** 89.0 kg
- **Enclosure:** IP65
- **Cooling:** forced-air
- **Operating temperature:** -40 to 60 °C
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, Wi-Fi
- **Protection:** DC switch, Surge protection


### Pros

- **Four independent MPPT trackers** - The 4-MPPT configuration (versus the typical 2 MPPTs found in comparable C&I string inverters of this power class) allows flexible string layout on irregular roof sections or partially shaded arrays without reducing overall system yield.
- **BloombergNEF Tier 1 status** - Hopewind was added to BloombergNEF's Global Tier 1 PV inverter manufacturer list in Q2 2024, one of only seven manufacturers worldwide on that list - a meaningful bankability signal for investors in commercial-scale installations.
- **High environmental resilience, IP65** - IP65 ingress protection combined with an operating range of -40°C to +60°C allows mounting without an additional protective enclosure on both industrial rooftops and open-field sites, lowering balance-of-system (BoS) costs versus lower-IP-rated units.
- **Built-in zero-export function, no extra hardware** - An integrated zero feed-in export interface meets local grid operator requirements without external sensors or controllers, cutting commissioning time and cost compared with solutions that require a separate export-limiter module.
- **AC/DC redundancy and remote commissioning** - Redundant AC and DC power supply plus touchless mobile-app startup minimize the number of required site visits, which matters for large, geographically dispersed C&I portfolios.


### Cons

- **Limited public reliability track record** - Unlike established Tier 1 manufacturers (Huawei, Sungrow, SMA) with years of publicly available field-failure data, Hopewind only reached BNEF Tier 1 status in 2024, meaning integrators have fewer independent, long-term reference datasets to assess field reliability on European markets.
- **20A maximum current per MPPT string** - The 20A per-input DC limit, while compatible with current-generation 210mm modules, is lower than the 45-65A rating found on larger units within the same hopeSun family (60-110kW class), which may constrain long, high-current string layouts as module current ratings continue to rise.


## About this series

The hopeSun KTL series comprises transformerless grid-tied inverters built for commercial and industrial installations, where power density and resilience to harsh operating conditions both matter. The units feature **four independent MPPT trackers**, giving designers the flexibility to match string configurations to irregular rooftops or partially shaded sections of a plant without sacrificing overall system performance. The DC inputs handle up to 20A per channel, making them fully compatible with modern, high-power 210mm PV modules widely used in C&I projects. The series stands out from competing products through features that simplify operation: **touch-free commissioning via a mobile app** and a built-in interface for the **zero export function**, allowing compliance with local grid requirements without extra hardware. Uptime is supported by **redundant AC and DC power supply** and smart air cooling, while an **IP65**-rated enclosure and an operating range from -40 to +60°C allow mounting both on industrial rooftops and in open-field environments. An optional PID recovery function plus built-in Type II surge protection devices extend system lifespan, making this series a dependable choice for integrators who prioritize reliability and straightforward maintenance.


## Questions


### How does the Hopewind hopeSun KTL series differ from typical C&I string inverters on the market?

The key difference is four independent MPPT trackers, which let the inverter handle irregular roof layouts or partially shaded sections of a solar farm without reducing the overall system yield. It's also transformerless, boosting efficiency, and its redundant AC and DC power design provides greater operational continuity than simpler string inverters built for residential use.


### Is the hopeSun KTL compatible with large 210mm solar modules?

Yes, the hopeSun KTL's DC inputs support up to 20A per MPPT string, making them fully compatible with modern, high-power 210mm modules widely used in commercial and industrial projects. This allows designers to build strings with fewer panels without exceeding the inverter's input parameters.


### How does the zero-export function on hopeSun KTL inverters work, and does it require extra hardware?

The zero-export function is built directly into the inverter and limits grid feed-in to zero, which many local grid operators require for industrial installations. Unlike competing solutions, no external controller or meter needs to be purchased separately - the control interface is already integrated into the inverter.


### Can hopeSun KTL inverters be installed outdoors in harsh weather conditions?

Yes, the enclosure has an IP65 rating, protecting the electronics from dust and water jets, and an operating range of -40°C to +60°C allows installation on industrial roofs as well as in open fields, including climates with large temperature swings. Smart air cooling further protects the electronics from overheating during hot months.


### What does commissioning and setup look like for a hopeSun KTL inverter during installation?

The series features touch-free commissioning via a mobile app, eliminating the need to physically connect a laptop or use onboard buttons during setup. Installers can configure parameters and start the inverter remotely from a smartphone, which shortens installation time and reduces the number of service visits needed at commissioning stage.


### Does the PID recovery function in hopeSun KTL actually extend the lifespan of a solar installation?

Yes, the optional PID recovery function helps reverse potential-induced degradation, an effect that weakens modules operating under high voltage in humid conditions. Combined with the built-in Class II surge protectors, it significantly reduces the risk of premature power loss in panels, improving long-term return on investment for the system.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/178176866969463ohf7-6756453ce6c8.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [KACO 110 TL3-US](https://comparepv.com/inverter/kaco-110-tl3-us) | 110 kW | 98.8% | 1 | 78.2 kg | +0.5 pp efficiency, -3 MPPT, 10.8 kg lighter |
| [Ginlong Solis S5-GC110K](https://comparepv.com/inverter/ginlong-solis-s5-gc110k) | 110 kW | 98.6% | 10 | 91.0 kg | +6 MPPT, 2.0 kg heavier |
| [Solis-110K-HV-5G](https://comparepv.com/inverter/ginlong-solis-solis-110k-hv-5g) | 110 kW | 98.5% | 9 | 82.0 kg | +5 MPPT, 7.0 kg lighter |
| [SAJ C6-110K-T12-40](https://comparepv.com/inverter/saj-c6-110k-t12-40) | 110 kW | 98.5% |  | 98.0 kg | 9.0 kg heavier |
| [FIMER PVM-110-TL](https://comparepv.com/inverter/fimer-pvm-110-tl) | 110 kW | 98.5% | 12 | 90.0 kg | +8 MPPT, 1.0 kg heavier |
| [INVT XG110KTR-F](https://comparepv.com/inverter/invt-xg110ktr-f) | 110 kW | 98.5% | 12 | 98.0 kg | +8 MPPT, 9.0 kg heavier |
| [Growatt MAX 110KTL3-X LV](https://comparepv.com/inverter/growatt-max-110ktl3-x-lv) | 110 kW | 98.4% | 10 | 84.0 kg | +6 MPPT, 5.0 kg lighter |
| [SMA Solar Sunny Tripower CORE2 STP 110-60](https://comparepv.com/inverter/sma-solar-sunny-tripower-core2-stp-110-60) | 110 kW | 98.4% | 12 | 93.5 kg | +8 MPPT, 4.5 kg heavier |


---

Source: https://comparepv.com/inverter/hopewind-hopesun-110ktl

