---
title: "Fronius International Argeno 125 Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "Fronius International Argeno 125 125 kW grid-tie inverter. Specs: 98.7% European efficiency, 10 MPPT, 1100 V max DC input, 90.0 kg."
source: "https://comparepv.com/inverter/fronius-international-argeno-125"
updated: 2026-11-14
---

# Fronius International Argeno 125


## Identity

- **Manufacturer:** Fronius International
- **Model:** Argeno 125
- **Series:** Fronius Argeno
- **Rated AC power:** 125 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 238 inverters from 100 to 500 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.7% | 98.5% | Typical | 43 |
| MPPT trackers | 10 | 8 | Typical | 37 |
| Max DC input voltage | 1100 V | 1100 V | Typical | 113 |
| Weight per kW | 0.7 | 0.7 | Typical | 147 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 125 kW
- **Max apparent power:** 125.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 180.4 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.80 ind. / cap.
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 250.00 kW
- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 200 to 1000 V
- **Start-up voltage:** 250 V
- **MPPT trackers:** 10
- **Max input current per MPPT:** 30.0 A
- **Max short-circuit current per MPPT:** 37.5 A


### Efficiency

- **European efficiency:** 98.7 %
- **Max efficiency:** 99.1 %


### Physical

- **Dimensions:** 755 × 1070 × 330 mm
- **Weight:** 90.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Noise:** 60 dB


### Connectivity and protection

- **Interfaces:** Ethernet
- **Protocols:** Ethernet LAN RJ45, Modbus TCP Sunspec, Daisy Chain
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** VDE4105, VDE4110, TOR Erzeuger Type A&B + R25, IEC 62109-1, IEC 62109-2, IEC 61000-6-2, IEC 61000-6-4


### Pros

- **10 independent MPPT trackers** - Ten MPPT trackers (two DC inputs each) allow modules with different orientation, tilt angle, and shading to be handled within a single installation - a feature rarely found at this power class (125 kW) and one that removes design compromises on irregular roof layouts.
- **Up to 200% DC oversizing** - The ability to connect PV module power up to twice the inverter's AC rated power maximizes energy yield without adding more inverter units, meaningfully reducing CAPEX and BoS cost for C&I installations.
- **High efficiency via SiC technology** - Silicon carbide (SiC) technology enables a declared peak efficiency of 99.1%, placing the Argeno in the upper tier of three-phase commercial inverters and reducing conversion losses across the full duty cycle.
- **Integrated arc-fault detection and surge protection** - Built-in Fronius Arc Guard (AFCI) functionality plus an optional Type 1+2 SPD module on both AC and DC sides increase operational safety for large industrial installations, where fire and overvoltage risk are key considerations.
- **IP66 enclosure and extended warranty** - IP66 ingress protection allows outdoor mounting in harsh weather conditions, and the standard 7-year manufacturer warranty (extendable via free Solar.web registration) supports low LCOE for commercial projects.


### Cons

- **Base warranty shorter than some competitors'** - The standard warranty is 7 years (with a paid extension option), while some tier-1 C&I inverter manufacturers (e.g., Huawei, Sungrow) offer standard base terms of up to 10 years, which may require extra budget for extension with Fronius.
- **No long-term field track record yet** - The series was unveiled at Intersolar 2025 and launched the same year, so multi-year field reliability data is not yet available, unlike established commercial-inverter lines from competitors on the market for several years.


## About this series

Fronius Argeno is a three-phase inverter series purpose-built for commercial and industrial (C&I) installations, where design flexibility and maximum roof utilization are critical. With **ten independent MPPT trackers**, the unit effortlessly handles modules with different orientations, tilt angles, and shading conditions within a single system, removing the need for compromises when designing around irregular roof layouts. The series stands out for its ability to support **DC oversizing of up to 200%**, allowing energy yield to be maximized without adding more inverters, which in turn reduces overall installation costs. The use of **silicon carbide (SiC) technology** delivers very high conversion efficiency and minimizes energy losses throughout the unit's operating cycle. Argeno takes no shortcuts on safety, featuring **integrated surge protection and arc-fault detection**, both essential for large-scale installations on industrial facilities. The IP66-rated enclosure supports outdoor mounting even in demanding weather conditions. This series is aimed at system integrators and investors delivering commercial-scale projects, for whom low operating costs (LCOE), fast installation, and long-term reliability, backed by an extended manufacturer warranty, are the top priorities.


## Questions


### What is 200% DC overdimensioning in Fronius Argeno inverters, and is it worth using?

DC overdimensioning up to 200% means PV modules with up to twice the inverter's nominal AC power can be connected to it. This lets installers fit more panels per inverter, boosting annual energy yield without buying an additional unit. It's especially valuable in C&I installations, where lowering the levelized cost of electricity (LCOE) per installed inverter is a key design goal.


### Is the Fronius Argeno inverter suitable for roofs with modules at different tilt angles and shading?

Yes, Argeno features ten independent MPPT trackers, each handling two DC inputs. This lets you connect module strings with different orientations, tilt angles, or shading levels to a single inverter without losing conversion efficiency. It's a major advantage when designing systems on irregular, segmented industrial or warehouse rooftops.


### What is the maximum power and DC voltage range of the Fronius Argeno inverter?

The flagship model, Argeno 125.0, has a nominal AC power of 125 kW and can accept up to 250 kWp of modules on the DC side at 200% overdimensioning. The DC input voltage range runs from 200 to 1,100 V, and each of the ten MPPTs handles up to 30 A and 15.5 kWp. This specification allows flexible design of large commercial installations.


### Does the Argeno series include arc fault and surge protection?

Yes, every Argeno inverter has built-in arc fault circuit interruption (AFCI) and integrated Type 1+2 surge protection. These safeguards matter in large industrial installations, where long DC cable runs increase arc fault risk and any failure could mean costly downtime.


### What warranty comes with Fronius Argeno inverters, and can it be extended?

Fronius Argeno ships with the manufacturer's standard warranty, which can be extended to up to 7 years once the unit is registered. For commercial investors, this limits the risk of service costs in the early years of a large installation's operation. It's worth confirming the exact warranty terms with your distributor at purchase, as they can vary by market.


### Can the Argeno inverter be installed outdoors in harsh weather conditions?

Yes, the Argeno's enclosure has an IP66 rating, meaning it's fully protected against dust and powerful water jets. This allows direct mounting on an industrial building's facade or in an unsheltered outdoor location, simplifying installation design and reducing construction costs.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/SE_DS_Fronius_Argeno_EN-7227955af92a.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [KACO 125 TL3 US-S](https://comparepv.com/inverter/kaco-125-tl3-us-s) | 125 kW | 99.0% | 1 | 78.2 kg | -9 MPPT, 11.8 kg lighter |
| [KACO 125 TL3](https://comparepv.com/inverter/kaco-125-tl3) | 125 kW | 99.0% | 1 | 78.2 kg | -9 MPPT, 11.8 kg lighter |
| [KACO 125 TL3-US](https://comparepv.com/inverter/kaco-125-tl3-us) | 125 kW | 98.7% | 1 | 78.2 kg | -9 MPPT, 11.8 kg lighter |
| [KACO 125 NX3 M10](https://comparepv.com/inverter/kaco-125-nx3-m10) | 125 kW | 98.7% |  |  | Similar on paper |
| [Schneider Electric CL125E](https://comparepv.com/inverter/schneider-electric-cl125e) | 125 kW | 98.7% | 1 | 75.0 kg | -9 MPPT, 15.0 kg lighter |
| [Ginlong Solis S5-GC125K-HV](https://comparepv.com/inverter/ginlong-solis-s5-gc125k-hv) | 125 kW | 98.6% | 10 | 91.0 kg | 1.0 kg heavier |
| [SAJ C6-125K-T12-40](https://comparepv.com/inverter/saj-c6-125k-t12-40) | 125 kW | 98.5% |  | 98.0 kg | 8.0 kg heavier |
| [FIMER PVM-125-TL](https://comparepv.com/inverter/fimer-pvm-125-tl) | 125 kW | 98.5% | 12 | 93.0 kg | +2 MPPT, 3.0 kg heavier |


---

Source: https://comparepv.com/inverter/fronius-international-argeno-125

