---
title: "FoxESS V40 Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "FoxESS V40 40 kW grid-tie inverter. Specs: 98.4% European efficiency, 1100 V max DC input, 42.0 kg."
source: "https://comparepv.com/inverter/foxess-v40"
updated: 2026-11-05
---

# FoxESS V40


## Identity

- **Manufacturer:** FoxESS
- **Model:** V40
- **Series:** V Series
- **Rated AC power:** 40 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.4% | 98.2% | Strong - top 15% | 44 |
| MPPT trackers | - | 4 |  |  |
| Max DC input voltage | 1100 V | 1100 V | Typical | 12 |
| Weight per kW | 1.1 | 1.2 | Typical | 209 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 40 kW
- **Max AC power:** 44.00 kW
- **Max apparent power:** 44.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 66.9 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading to 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 80.00 kW
- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 200 to 1000 V
- **Start-up voltage:** 250 V
- **Max input current per MPPT:** 40.0 A
- **Max short-circuit current per MPPT:** 50.0 A


### Efficiency

- **European efficiency:** 98.4 %
- **Max efficiency:** 98.7 %


### Physical

- **Dimensions:** 430 × 640 × 243 mm
- **Weight:** 42.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Operating temperature:** -30 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet, Display
- **Protocols:** RS485, USB, Wi-Fi, LAN
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** EN50549-1


### Pros

- **Real-time PV string-level monitoring** - The feature tracks current on each PV string individually, detecting output drops from a single string (shading, fault) before they affect total system yield. In large rooftop and ground-mount installations in the 30-75 kW range, this significantly simplifies diagnostics and yield reconciliation.
- **PID recovery function** - Built-in PID recovery mitigates voltage-induced potential degradation, a more frequent issue in three-phase systems with higher system voltage than in small single-phase setups. This helps modules retain their nominal efficiency for longer.
- **AFCI arc-fault protection** - DC-side arc-fault detection is a safety feature increasingly mandated for larger commercial installations across the EU - FoxESS integrates it natively without requiring add-on modules.
- **IP66 enclosure and C5 anti-corrosion rating** - Per the manufacturer's datasheet, the inverter operates from -30 to 60°C and 0-100% humidity without condensation; combined with IP66/C5, this allows outdoor installation in coastal and industrial environments without extra protective enclosures - an advantage over many competitors limited to IP65.
- **BNEF Tier 1 status** - FoxESS appears on BloombergNEF's Tier 1 list for energy storage manufacturers (Q4 2024 announcement), a bankability indicator widely used by banks and investors when financing larger commercial PV projects.


### Cons

- **Shorter brand track record** - FoxESS was founded in 2019, giving it a markedly shorter track record than peers in this power class, such as SMA (since 1981) or Huawei/Sungrow, which have been established in PV for over a decade longer. For investors assessing long-term service risk on 30-75 kW installations over a 20-25 year horizon, this is a factor worth weighing.
- **BNEF Tier 1 status applies to energy storage, not PV inverters** - FoxESS's official BNEF Tier 1 recognition is in the 'Energy Storage Manufacturers' category, not the separate 'Power Inverter Tier 1' list on which GoodWe or Sofar appear. Bankability claims for the V Series as a PV inverter are therefore not directly backed by this specific BNEF list.


## About this series

The V Series is a lineup of three-phase FoxESS inverters built for commercial installations and larger residential systems, where both performance and resilience under demanding conditions matter. What sets this series apart is **real-time PV string monitoring**, which detects drops in performance of individual module strings before they translate into real energy losses - a major advantage when tracking yield across large rooftop or ground-mount arrays. The inverters feature a **PID recovery function** that limits panel degradation caused by potential-induced degradation, helping modules retain efficiency over a longer lifetime. System safety is reinforced by built-in **AFCI arc-fault protection**, which detects dangerous DC-side arc faults. An enclosure rated **IP66 with C5 anti-corrosion protection** allows outdoor installation even in coastal or industrial environments without extra enclosures. The series spans models from 30 to 75 kW, making it easy to match a unit to project scale without losing configuration flexibility. This is a solution built for installers looking for reliability when scaling larger three-phase systems.


## Questions


### How does PV string monitoring in the FoxESS V Series differ from standard inverter monitoring?

A standard inverter only shows total system output, while the V Series monitors each PV string independently in real time. This lets installers or owners quickly spot that a single string is underperforming due to shading, a damaged cable, or a faulty module, instead of noticing lower yield only months later on the energy bill.


### Can FoxESS V Series inverters be installed outdoors near the coast?

Yes, the enclosure has an IP66 rating and C5 anti-corrosion certification, meaning it resists moisture, dust, and aggressive environments, including salt mist typical of coastal areas. No extra protective housing or canopy is required, which simplifies installation on facades of industrial buildings or warehouses near the shore.


### What is PID recovery in FoxESS V Series inverters and does it actually extend panel lifespan?

PID degradation is a power loss caused by a voltage potential difference between the cells and the module frame, particularly common in large systems with long strings. The inverter automatically detects and corrects this polarization at night, when panels aren't producing power. In practice, this limits long-term power loss in the modules, though the actual impact depends on panel quality and installation conditions.


### Which FoxESS V Series model should I choose for a commercial installation around 50 kW?

The V Series spans 30 to 75 kW (including V30, V33, V36, V40, V50, V60, and V75), so for a roughly 50 kW installation the V50 is the best match, allowing full use of the PV array's power without significantly oversizing the inverter. The exact model should still be confirmed with a system designer based on string count and layout.


### Is AFCI arc-fault protection on V Series inverters legally required?

In many markets, including parts of Europe, AFCI protection is increasingly required or recommended for commercial installations due to fire risk from damaged DC connections. V Series inverters include this protection as a factory-built feature, so installers don't need to add an external AFCI module, which reduces installation time and overall system cost.


### Are FoxESS V Series inverters suitable for large ground-mount installations, or only rooftop systems?

The V Series is designed for both rooftop and larger ground-mount installations. Real-time PV string monitoring is especially useful in ground-mount systems, where panels are spread over a large area and individual rows are harder to inspect physically - a faulty string can be identified remotely without sending a crew on-site.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/ENVdatasheetV2320260703-ca88358bd5e3.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Growatt MID 40KTL3-X](https://comparepv.com/inverter/growatt-mid-40ktl3-x) | 40 kW | 98.5% |  | 30.5 kg | 11.5 kg lighter |
| [INVT XG40KTR](https://comparepv.com/inverter/invt-xg40ktr) | 40 kW | 98.5% |  | 32.0 kg | 10.0 kg lighter |
| [Huawei SUN2000-40KTL-M3](https://comparepv.com/inverter/huawei-sun2000-40ktl-m3) | 40 kW | 98.4% | 4 | 43.0 kg | 1.0 kg heavier |
| [Solis-40K](https://comparepv.com/inverter/ginlong-solis-solis-40k) | 40 kW | 98.4% | 4 | 61.0 kg | 19.0 kg heavier |
| [Sungrow SG40CX-P2](https://comparepv.com/inverter/sungrow-sg40cx-p2) | 40 kW | 98.3% | 4 | 40.0 kg | 2.0 kg lighter |
| [Sungrow SG40CX](https://comparepv.com/inverter/sungrow-sg40cx) | 40 kW | 98.3% |  | 58.0 kg | 16.0 kg heavier |
| [Ginlong Solis S5-GC40K](https://comparepv.com/inverter/ginlong-solis-s5-gc40k) | 40 kW | 98.3% |  | 42.1 kg | Similar on paper |
| [Deye SUN-40K-G-LV](https://comparepv.com/inverter/deye-sun-40k-g-lv) | 40 kW | 98.3% | 4 | 60.0 kg | 18.0 kg heavier |


---

Source: https://comparepv.com/inverter/foxess-v40

