---
title: "FoxESS AC1-9.6-US / HI-9.6-US Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "FoxESS AC1-9.6-US / HI-9.6-US 9.6 kW hybrid inverter. Specs: 3 MPPT, 600 V max DC input, 38.0 kg."
source: "https://comparepv.com/inverter/foxess-ac1-9-6-us-hi-9-6-us"
updated: 2026-11-05
---

# FoxESS AC1-9.6-US / HI-9.6-US


## Identity

- **Manufacturer:** FoxESS
- **Model:** AC1-9.6-US / HI-9.6-US
- **Series:** US Series
- **Rated AC power:** 9.6 kW
- **Type:** Hybrid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 97.5% |  |  |
| MPPT trackers | 3 | 2 | Strong - top 13% | 20 |
| Max DC input voltage | 600 V | 800 V | Typical | 409 |
| Weight per kW | 4.0 | 3.0 | Weak - bottom 23% | 629 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 9.6 kW
- **Max apparent power:** 9.60 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 240 V
- **Max AC current:** 40.0 A
- **Grid frequency:** 60 Hz
- **Power factor:** >0.99 (Adjustable from 0.8 leading to 0.8 lagging)
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 19.20 kW
- **Max DC voltage:** 600 V
- **MPPT voltage range:** 80 to 550 V
- **Start-up voltage:** 100 V
- **MPPT trackers:** 3
- **Max input current per MPPT:** 28.0 A
- **Max short-circuit current per MPPT:** 44.0 A


### Efficiency

- **Max efficiency:** 97.8 %
- **CEC efficiency:** 97.0 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 85-460
- **Max charge current:** 50.0 A
- **Max discharge current:** 60.0 A
- **Backup power:** 11.40 kW


### Physical

- **Dimensions:** 658 × 462 × 234 mm
- **Weight:** 38.0 kg
- **Enclosure:** Type 4X
- **Cooling:** natural
- **Noise:** 35 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 3000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet, Display
- **Protocols:** WiFi, LAN, CAN2.0, RS485, Meter, CT, ISO alarm, SUNSPEC
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** UL1741 SA, UL1741 SB, UL1741 CRD, HECO SRD-V2.0, CSA C22.2 No.107.1-16, UL1998, UL1699B, Rule 21, FCC part15 CLASS B, IEEE1547-2018, IEEE1547a-2020, IEEE1547.1-2020


### Pros

- **Native split-phase 120/240V design** - The inverter is engineered from the ground up for the US split-phase grid (120/240V), eliminating the need for an external autotransformer - unlike many adapted European models - which simplifies compliance with local installation codes (NEC).
- **Scalable with up to 4 parallel units** - The US Series supports parallel operation of up to four inverters, allowing a system to scale from a single 3.8-11.4 kW unit to roughly 45 kW without switching hardware platforms or replacing already-installed units.
- **UL9540 and UL1741 certification** - Compliance with UL9540 (energy storage systems) and UL1741 (grid interconnection) is required by most US utility providers and AHJs, which significantly eases and speeds up the permitting and interconnection agreement process.
- **High conversion efficiency at 97.6%** - A maximum efficiency of 97.6% for the H1-AC1 models is competitive against other tier-1 hybrid inverters in the US residential market (e.g., SolarEdge, Sol-Ark), translating into lower energy losses across PV-to-battery-to-grid power flows.
- **Type 4X enclosure for outdoor mounting** - The Type 4X enclosure rating allows outdoor installation without additional weatherproofing, resisting rain, dust, ice, and corrosion - giving installers more siting flexibility, such as on exterior walls or garages lacking indoor access.


### Cons

- **Closed HV battery ecosystem** - The inverter only pairs with FoxESS's proprietary high-voltage ECS battery line, unlike competitors such as Sol-Ark or Schneider Electric that support broader third-party battery compatibility - limiting storage flexibility during system design and future expansion.
- **Limited long-term US track record** - FoxESS was founded in 2019, and the US Series launched in 2022, meaning a shorter operating history on the US market compared to established brands like SMA or Generac - less field data exists on long-term durability under real-world US operating conditions.


## About this series

The US Series comprises FoxESS hybrid inverters engineered specifically for the American residential market, built around a **split-phase design** compatible with the local 120/240V electrical infrastructure. It's a solution for installers and homeowners who need a flexible system combining solar generation, energy storage, and backup power in a single unit. The inverter stands out through its **compatibility with high-voltage batteries** across several capacity configurations, allowing the system to be precisely matched to a household's needs and expanded gradually as storage demands grow. Thanks to support for **parallel operation of up to four units**, the series scales from small single-family installations to larger systems without switching hardware platforms. The **Type 4X-rated enclosure** allows safe outdoor mounting, resistant to moisture, dust, and corrosion, which simplifies installation across varied climate conditions. In addition, **UL9540 and UL1741 certification** confirms compliance with US safety standards for energy storage systems and grid interconnection. Integration with a smart energy hub and monitoring app gives users full control over power flows, critical load management during grid outages, and optimization of self-consumption from the PV array.


## Questions


### How does the US Series differ from FoxESS hybrid inverters designed for the European market?

The key difference is the split-phase design at 120/240V, matched to U.S. residential grid infrastructure, unlike the single-phase or three-phase 230/400V configurations used in European models. The US Series also carries UL9540 and UL1741 certifications required for residential installations in the U.S., plus a Type 4X rated enclosure for safe outdoor mounting, which is not standard on inverters built for the European market.


### What warranty applies to FoxESS US Series inverters?

US Series hybrid inverters, including the H1 models across various power ratings, come with a standard 12.5-year manufacturer warranty. This is a typical term for this inverter class in the U.S. market and gives investors long-term confidence in their investment. It's always worth confirming the current warranty terms with an authorized distributor, since the manufacturer may adjust them depending on the specific model variant.


### Can a US Series inverter be mounted outdoors?

Yes, the Type 4X rated enclosure allows safe outdoor installation even in harsh weather conditions. The construction resists moisture, dust, rain, and corrosion, which is especially important in high-humidity or variable climates. This gives installers more flexibility in choosing a mounting location without needing to build additional canopies or protective enclosures.


### Which batteries does the US Series work with, and can the energy storage be expanded later?

US Series inverters are compatible with FoxESS high-voltage batteries in several capacity configurations, allowing the storage system to be sized to a home's needs right from purchase. The system supports gradually adding battery modules as energy demand grows, without replacing the inverter itself, which keeps future expansion costs down for a solar-plus-storage installation.


### Can multiple US Series inverters be combined into one home system?

Yes, the US Series supports parallel operation of up to four units, allowing much higher combined output than a single inverter without switching to a different hardware platform. This is useful for larger single-family homes or properties with growing power needs, where one unit isn't enough and the investor wants to avoid replacing the entire system with a different model later on.


### What do the UL9540 and UL1741 certifications mean, and are they required for U.S. residential installations?

UL9540 is a U.S. safety standard for energy storage systems, while UL1741 covers grid interconnection of inverters. Both certifications are required or preferred by local building authorities and utility companies in most U.S. states, so having them in place significantly simplifies permitting and interconnection approval when installing a solar-plus-storage system.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/USH1AC1DatasheetV4220251210-76e003cd7199.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SAJ H2-9.6K-LS4-US](https://comparepv.com/inverter/saj-h2-9-6k-ls4-us) | 9.6 kW |  |  | 48.0 kg | 10.0 kg heavier |
| [SMA Solar SBSE9.6-US-50](https://comparepv.com/inverter/sma-solar-sbse9-6-us-50) | 9.6 kW |  | 3 | 22.0 kg | 16.0 kg lighter |
| [Sigenergy SigenStor EC SP US-9.6](https://comparepv.com/inverter/sigenergy-sigenstor-ec-sp-us-9-6) | 9.6 kW |  | 4 | 35.0 kg | +1 MPPT, 3.0 kg lighter |
| [Afore AF9.6K-DH](https://comparepv.com/inverter/afore-af9-6k-dh) | 9.6 kW |  |  | 25.0 kg | 13.0 kg lighter |
| [RCT Power 10.0 LAN](https://comparepv.com/inverter/rct-power-10-0-lan) | 9.9 kW | 98.3% | 2 | 32.0 kg | +0.3 kW, -1 MPPT, 6.0 kg lighter |
| [Sofar Solar ESI-9.9K-T1-A](https://comparepv.com/inverter/sofar-solar-esi-9-9k-t1-a) | 9.9 kW | 97.5% | 3 | 30.0 kg | +0.3 kW, 8.0 kg lighter |
| [FoxESS H3-9.9-Smart](https://comparepv.com/inverter/foxess-h3-9-9-smart) | 9.9 kW | 97.2% | 3 | 34.0 kg | +0.3 kW, 4.0 kg lighter |
| [HYXiPower HYX-H9K-HTA](https://comparepv.com/inverter/hyxipower-hyx-h9k-hta) | 9.9 kW |  | 2 | 184.0 kg | +0.3 kW, -1 MPPT, 146.0 kg heavier |


---

Source: https://comparepv.com/inverter/foxess-ac1-9-6-us-hi-9-6-us

