---
title: "FIMER FIM-HY-3.6-SE-A Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "FIMER FIM-HY-3.6-SE-A 3.6 kW hybrid inverter. Specs: 97.5% European efficiency, 2 MPPT, 600 V max DC input, 14.5 kg."
source: "https://comparepv.com/inverter/fimer-fim-hy-3-6-se-a"
updated: 2026-11-14
---

# FIMER FIM-HY-3.6-SE-A


## Identity

- **Manufacturer:** FIMER
- **Model:** FIM-HY-3.6-SE-A
- **Series:** PowerUNO FIM-HY-SE-A
- **Rated AC power:** 3.6 kW
- **Type:** Hybrid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 1,005 inverters from 3 to 6 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 97.5% | 97.1% | Typical | 155 |
| MPPT trackers | 2 | 2 | Typical | 59 |
| Max DC input voltage | 600 V | 600 V | Typical | 261 |
| Weight per kW | 4.0 | 3.9 | Typical | 509 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 3.6 kW
- **Max apparent power:** 3.60 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 16.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** >0.995, adj. ± 0.8 - 1 (over/under excited)
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 5.40 kW
- **Max DC voltage:** 600 V
- **MPPT voltage range:** 135 to 500 V
- **Start-up voltage:** 150 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 16.0 A
- **Max short-circuit current per MPPT:** 20.0 A


### Efficiency

- **European efficiency:** 97.5 %
- **Max efficiency:** 97.9 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 350...560 V
- **Max charge current:** 17.0 A
- **Max discharge current:** 17.0 A
- **Backup power:** 6.00 kW


### Physical

- **Dimensions:** 330 × 470 × 182 mm
- **Weight:** 14.5 kg
- **Enclosure:** IP65
- **Cooling:** natural
- **Noise:** 40 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 3000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet
- **Protocols:** Wi-Fi, Ethernet, RS-485, Modbus TCP (SunSpec), USB
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** CE, RCM, IEC/EN 62109-1, IEC/EN 62109-2, IEC 62477-1, EN 61000-6-2, EN 61000-6-3, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12, CEI 0-21, DIN V VDE V 0126-1-1, VDE-AR-N 4105, G83/2, G59/3, G98-1, G99-1, RD 413, ITC-BT-40, AS/NZS 4777.2, C10/11, IEC 61727, IEC 62116


### Pros

- **Battery-ready: DC and AC coupling** - The PowerUNO FIM-HY-SE-A series supports battery coupling in both DC and AC architecture without swapping the inverter, which is uncommon among single-phase hybrids in the 2-6 kW class and gives installers design flexibility during project execution.
- **Sub-2-second backup switchover** - A backup switchover time under 2 seconds meets the tolerance of most household loads (routers, fridges) without a perceptible interruption, differentiating this series from models lacking UPS functionality or with 3-10 s switchover times.
- **AFCI + integrated RCD as standard** - Patented arc-fault detection (AFCI) combined with a built-in residual current device raises the safety baseline for residential installs - several competing inverters in this segment require a separate external RCD module.
- **Single enclosure across the full 2-6 kW range** - A unified mechanical platform covering all power classes (2.0-6.0 kW) reduces distributor SKU count and shortens install/replacement time, lowering logistics costs compared to manufacturers using different enclosure sizes per power rating.
- **Full digital connectivity included** - Wi-Fi, Ethernet, USB, and Modbus TCP are built in at no extra cost, enabling immediate EMS/HEMS integration - some competitors sell Ethernet or Modbus TCP as a separate add-on module.


### Cons

- **Narrower MPPT voltage window at low irradiance** - The adjustable start-up voltage range of 120-350 V (per FIMER's Rev L datasheet) is narrower than segment leaders (e.g., SMA, Huawei, with MPPT starting around 80-100 V), which can limit energy harvest under low irradiance or in strings with fewer panels.
- **Uncertain long-term manufacturer support in residential** - FIMER has reorganized its residential PV product portfolio in recent years, raising questions about long-term service and firmware-update availability compared to manufacturers with a stable, unchanged residential strategy (e.g., SMA, Fronius).


## About this series

The FIMER PowerUNO FIM-HY-SE-A series consists of single-phase **hybrid inverters** designed for residential installations that combine solar generation with energy storage. One of the series' biggest advantages is its **battery ready** design, supporting DC or AC coupled storage, giving installers the flexibility to choose the system architecture without switching to a different device. Thanks to patented arc-fault detection (AFCI) and built-in residual current protection, the series raises the safety bar for installations, which matters especially in residential buildings. The inverters also stand out with a **backup power function** that switches over in under two seconds, giving households real protection from grid outages. A unified enclosure covering the entire power range from 2 to 6 kW simplifies logistics and stocking for distributors and installers alike. Built-in **Wi-Fi, Ethernet, and USB connectivity**, along with Modbus TCP support, enables real-time remote monitoring and integration with energy management systems. This is a solution for investors looking for a compact, future-ready inverter that combines solar generation, energy storage, and backup power in a single device.


## Questions


### What does the battery-ready design of the FIMER PowerUNO FIM-HY-SE-A offer compared to a standard hybrid inverter?

Battery ready means the inverter is prepared for connecting an energy storage system in either DC-coupled or AC-coupled mode, without needing to swap the unit. Installers can deploy the inverter first and add a battery later, or choose the coupling architecture based on budget and available storage options. This gives more flexibility than inverters designed for only one storage configuration.


### What power range does the FIM-HY-SE-A series cover, and does it share the same enclosure across models?

The series spans single-phase models from 2 to 6 kW, all housed in one unified enclosure. This means installers and distributors stock and mount a single physical unit regardless of the selected power rating, simplifying logistics, speeding up installation, and making it easy to match the inverter to a specific home's energy needs.


### How fast is the backup power switchover on the FIMER PowerUNO FIM-HY-SE-A?

The inverter switches to battery-backed power in under two seconds when grid voltage is lost. In practice, most household loads such as routers, refrigerators, and lighting don't even notice the interruption, providing real protection for the household against grid outages.


### Does the FIM-HY-SE-A have arc-fault protection, and is it safe for residential installations?

Yes, the series uses a patented AFCI (arc-fault circuit interrupter) technology along with integrated residual current protection. This lets the system detect dangerous arcing in DC wiring and automatically disconnect the inverter, significantly improving fire safety in residential buildings.


### How do you connect the FIMER PowerUNO FIM-HY-SE-A to remote monitoring or a home energy management system?

The inverter includes built-in Wi-Fi, Ethernet, and USB connectivity, plus Modbus TCP support. This enables real-time remote monitoring of production and consumption through the manufacturer's app, as well as integration with third-party smart home energy management systems without additional modules.


### Can a battery storage system from another manufacturer be connected to the FIM-HY-SE-A inverter?

The battery-ready design with DC- or AC-coupled connection provides flexibility in choosing a storage system, but actual compatibility depends on the specific battery model and its communication protocol. Before purchasing, check the current list of compatible storage systems with a FIMER distributor or the technical documentation for the specific inverter version.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/FIMER_PowerUNO_EN_Rev_L_0-ec309f89f943.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [HYXiPower HYX-H3K6-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h3k6-hsa2) | 3.6 kW | 98.2% |  | 38.0 kg | +0.7 pp efficiency, 23.5 kg heavier |
| [Growatt SPM 3600TL-HU](https://comparepv.com/inverter/growatt-spm-3600tl-hu) | 3.6 kW | 97.6% | 2 | 26.0 kg | 11.5 kg heavier |
| [Sunsynk SM3.6kWLLL/SM3.6kWPLL](https://comparepv.com/inverter/sunsynk-sm3-6kwlll-sm3-6kwpll) | 3.6 kW | 97.6% |  | 10.5 kg | 4.0 kg lighter |
| [Sunsynk SM3.6kWLLL65/SM3.6kWPLL65](https://comparepv.com/inverter/sunsynk-sm3-6kwlll65-sm3-6kwpll65) | 3.6 kW | 97.6% | 2 | 22.0 kg | 7.5 kg heavier |
| [Growatt MIN 3600TL-XH](https://comparepv.com/inverter/growatt-min-3600tl-xh) | 3.6 kW | 97.2% | 2 | 10.8 kg | 3.7 kg lighter |
| [Growatt MIN 3600TL-XA](https://comparepv.com/inverter/growatt-min-3600tl-xa) | 3.6 kW | 97.2% |  | 10.8 kg | 3.7 kg lighter |
| [Growatt MIN 3600TL-XH2](https://comparepv.com/inverter/growatt-min-3600tl-xh2) | 3.6 kW | 97.2% | 2 | 10.8 kg | 3.7 kg lighter |
| [SAJ HS3-3.6K-S2-W/G-P](https://comparepv.com/inverter/saj-hs3-3-6k-s2-w-g-p) | 3.6 kW | 97.2% | 2 | 27.5 kg | 13.0 kg heavier |


---

Source: https://comparepv.com/inverter/fimer-fim-hy-3-6-se-a

