---
title: "FIMER FIM-HY-10.0-SE-A-3PH Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "FIMER FIM-HY-10.0-SE-A-3PH 10 kW hybrid inverter. Specs: 97.9% European efficiency, 2 MPPT, 1000 V max DC input, 18.0 kg."
source: "https://comparepv.com/inverter/fimer-fim-hy-10-0-se-a-3ph"
updated: 2026-11-14
---

# FIMER FIM-HY-10.0-SE-A-3PH


## Identity

- **Manufacturer:** FIMER
- **Model:** FIM-HY-10.0-SE-A-3PH
- **Series:** PowerTRIO
- **Rated AC power:** 10 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 97.9% | 97.5% | Strong - top 20% | 105 |
| MPPT trackers | 2 | 2 | Typical | 145 |
| Max DC input voltage | 1000 V | 800 V | Typical | 135 |
| Weight per kW | 1.8 | 3.0 | Strong - top 17% | 132 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 10 kW
- **Max apparent power:** 10.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 15.2 A
- **Grid frequency:** 50 Hz
- **Power factor:** >0.995, adj. ±0.8-1 (over/under excited)
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 12.75 kW
- **Max DC voltage:** 1000 V
- **MPPT trackers:** 2
- **Max short-circuit current per MPPT:** 20.0 A


### Efficiency

- **European efficiency:** 97.9 %
- **Max efficiency:** 98.3 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 600-980 V
- **Max charge current:** 17.0 A
- **Max discharge current:** 17.0 A


### Physical

- **Dimensions:** 373 × 518 × 183 mm
- **Weight:** 18.0 kg
- **Enclosure:** IP65
- **Cooling:** natural
- **Noise:** 40 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 3000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet
- **Protocols:** Wi-Fi, Ethernet, RS-485, Modbus TCP (SunSpec), USB
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** CE, RCM, IEC 62109-1, IEC 62109-2, IEC 62477-1, EN IEC 61000-6-1, EN IEC 61000-6-2, EN IEC 61000-6-3, EN IEC 61000-6-4, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12, CEI 0-16, CEI 0-21, DIN V VDE V 0126-1-1, VDE-AR-N 4105, G98 Issue 2, G99 Issue 2, AS/NZS 4777.2, EN 50549-10, IEC 61727, IEC 62116, EN 62116


### Pros

- **DC- or AC-coupled battery flexibility** - PowerTRIO supports both DC-coupled and AC-coupled battery topologies, letting installers pick the configuration best suited to a new installation or a retrofit of existing PV with storage - a rare trait among three-phase hybrids in this power class.
- **Full backup power under unbalanced loads** - The series delivers 100% backup power even with uneven load distribution across phases, meaning a single high-draw appliance on one phase won't reduce available UPS power on the others - most competing three-phase hybrids require balanced loads for full backup output.
- **Patented AFCI and low noise level** - An integrated, patented arc-fault circuit interrupter (AFCI) reduces DC wiring fire risk, and a noise level below 20 dB(A) per manufacturer datasheet allows indoor installation in residential buildings without acoustic nuisance.
- **High DC/AC oversizing ratio and parallel operation** - A high DC/AC ratio allows connecting more PV capacity than the inverter's nominal AC output, boosting yield during low-irradiance periods, while multi-unit parallel operation lets the same series scale from single-family homes to commercial installations on one platform.


### Cons

- **History of manufacturer financial instability** - FIMER went through creditor-protection proceedings and insolvency in 2022-2023, with the inverter business only acquired by McLaren Applied Group (MA Solar Italy) in November 2024. For systems carrying 10-25 year warranties, this represents a real service and spare-parts continuity risk, even though the PowerTRIO series itself is not formally discontinued.
- **No publicly stated warranty term** - Available product documentation (manual, QIG) refers warranty terms to separate Terms and Conditions supplied with the order, without an explicit duration in years - unlike competitors (e.g., Huawei, SolarEdge) that routinely publish 10+ year warranties for hybrid inverters in marketing materials.


## About this series

FIMER PowerTRIO is a series of three-phase hybrid inverters designed for installations combining solar generation with energy storage. The series solves one of the most common pain points for prosumers - lack of flexibility in battery system configuration - by supporting **DC- or AC-coupled** setups, allowing installers to choose the topology that best fits a given project, whether it's a new installation or a retrofit. A key advantage is **full-power backup** even under unbalanced loads across phases, delivering real energy security for homes and small businesses during grid outages. System safety is reinforced by a **patented arc-fault detection system (AFCI)**, reducing the risk of fire in DC wiring. The inverters also stand out thanks to a **high DC/AC oversizing ratio**, enabling more panel capacity than nominal AC output and improving energy harvest during periods of lower irradiance. Low operating noise and built-in connectivity (Wi-Fi, Ethernet) simplify installation in residential buildings and remote monitoring of system performance. With support for multiple units running in parallel, the PowerTRIO series scales from single-family homes to larger commercial installations, giving installers one versatile hybrid solution.


## Questions


### What is the difference between DC and AC coupling in FIMER PowerTRIO inverters, and which one should I choose?

DC coupling means the battery connects to the same DC circuit as the solar panels, giving higher charging efficiency in new installations. AC coupling lets you add an energy storage system independently of the existing PV array, which is more convenient when retrofitting an older system without touching the DC wiring. PowerTRIO supports both topologies, so the choice depends on whether the installation is new or being upgraded.


### Will PowerTRIO provide full backup power to a home if the load is unbalanced across phases?

Yes, this is one of the series' key advantages. Most hybrid inverters limit backup power when loads are unbalanced across phases, but PowerTRIO delivers full backup power output regardless of how loads are distributed across phases. In practice, this means a refrigerator on one phase and air conditioning on another will keep running without interruption during a grid outage.


### What does the AFCI system in PowerTRIO inverters do, and is it mandatory?

AFCI (Arc Fault Circuit Interrupter) is FIMER's patented arc-fault detection system for DC wiring, which automatically disconnects the installation when it detects abnormal arcing, before it can ignite a fire. This reduces fire risk caused by a damaged connector or chafed cable on the roof. In many countries, including under certain insurance requirements, this kind of protection is increasingly required or strongly recommended.


### Can I connect more panel power to a PowerTRIO inverter than its rated AC output?

Yes, PowerTRIO has a high DC/AC oversizing ratio, allowing you to connect PV capacity that significantly exceeds the inverter's rated AC power. This configuration increases energy yield during morning, afternoon, and low-irradiance periods, when panels don't reach peak output anyway. The exact maximum oversizing ratio for a specific model should be checked in that variant's datasheet.


### Can PowerTRIO inverters be connected in parallel for larger commercial installations?

Yes, PowerTRIO supports parallel operation of multiple units, allowing the system to scale from a single-family home up to a larger commercial installation without changing hardware platforms. For installers, this means one hardware solution and one monitoring interface regardless of project size, simplifying standardization of offers and service.


### Is installing PowerTRIO in a residential building, e.g., a garage next to a bedroom, a problem due to noise?

It shouldn't be, since PowerTRIO features low operating noise thanks to cooling optimized for indoor installations. This allows the inverter to be mounted in utility rooms, garages, or hallways close to living spaces without worrying about the unpleasant fan noise typical of older, higher-power inverter models.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/FIMER_PowerTRIO_EN_Rev_M-162dbe075e2b.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolarEdge SE10000H](https://comparepv.com/inverter/solaredge-se10000h) | 10 kW | 99.0% |  | 19.6 kg | +1.1 pp efficiency, 1.6 kg heavier |
| [Sigenergy SigenStor Neo EC 10.0 TP](https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-10-0-tp) | 10 kW | 98.7% |  | 30.0 kg | +0.8 pp efficiency, 12.0 kg heavier |
| [Sigenergy Sigen Hybrid 10.0 TP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-10-0-tp2) | 10 kW | 98.5% | 2 | 19.5 kg | +0.6 pp efficiency, 1.5 kg heavier |
| [HYXiPower HYX-H10K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h10k-hsa2) | 10 kW | 98.2% |  | 38.0 kg | 20.0 kg heavier |
| [HYXiPower HYX-H10K-HT](https://comparepv.com/inverter/hyxipower-hyx-h10k-ht) | 10 kW | 98.2% | 2 | 34.0 kg | 16.0 kg heavier |
| [Growatt MOD 10KTL3-XH](https://comparepv.com/inverter/growatt-mod-10ktl3-xh) | 10 kW | 98.1% | 2 | 14.0 kg | 4.0 kg lighter |
| [Growatt MOD 10KTL3-HU](https://comparepv.com/inverter/growatt-mod-10ktl3-hu) | 10 kW | 98.1% | 3 | 20.0 kg | +1 MPPT, 2.0 kg heavier |
| [Huawei SUN2000-10KTL-M1](https://comparepv.com/inverter/huawei-sun2000-10ktl-m1) | 10 kW | 98.1% | 2 | 17.0 kg | 1.0 kg lighter |


---

Source: https://comparepv.com/inverter/fimer-fim-hy-10-0-se-a-3ph

