---
title: "Deye SUN-8.8K-OG03LP1-EU-AM2 Off-grid Inverter: Specs & Datasheet | ComparePV"
description: "Deye SUN-8.8K-OG03LP1-EU-AM2 8.8 kW off-grid inverter. Specs: 96.5% European efficiency, 500 V max DC input, 8.6 kg, 5 yrs warranty."
source: "https://comparepv.com/inverter/deye-sun-8-8k-og03lp1-eu-am2"
updated: 2026-11-05
---

# Deye SUN-8.8K-OG03LP1-EU-AM2


## Identity

- **Manufacturer:** Deye
- **Model:** SUN-8.8K-OG03LP1-EU-AM2
- **Series:** SUN-OG03LP1
- **Rated AC power:** 8.8 kW
- **Type:** Off-grid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.5% | 97.5% | Weak - bottom 10% | 507 |
| MPPT trackers | - | 2 |  |  |
| Max DC input voltage | 500 V | 800 V | Weak - bottom 10% | 640 |
| Weight per kW | 1.0 | 3.0 | Strong - top 1% | 3 |
| Warranty | 5 yrs | 5 yrs | Typical | 123 |


## Specification


### AC output

- **Rated AC power:** 8.8 kW
- **Max apparent power:** 8.80 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 38.3 A
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 14.08 kW
- **Max DC voltage:** 500 V
- **MPPT voltage range:** 150 to 425 V
- **Start-up voltage:** 125 V


### Efficiency

- **European efficiency:** 96.5 %
- **Max efficiency:** 97.6 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 20-30 / 40-60
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 424 × 323 × 176 mm
- **Weight:** 8.6 kg
- **Enclosure:** IP65
- **Cooling:** forced-air
- **Noise:** 46 dB
- **Operating temperature:** -40 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 3000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Bluetooth, Display
- **Protocols:** Wi-Fi, Bluetooth, RS485, CAN
- **Protection:** Surge protection


### Warranty and certificates

- **Warranty:** 5 years
- **Certifications:** IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4


### Pros

- **4 ms switching - load protection** - Transfer time between PV/battery operation and backup state is around 4 ms, a best-in-class figure among off-grid inverters that protects sensitive loads (servers, medical equipment) from reboot during sudden load changes.
- **High battery charge/discharge current** - Charge/discharge current reaches 90-140A depending on the variant, enabling fast energy buffering from PV even during short sunshine windows, with automatic BMS matching for both lithium-ion and lead-acid batteries.
- **2x PV oversizing capability** - The 2x PV oversizing function, combined with a max PV input current of roughly 36A, allows more panels to be connected than the native MPPT count typically allows, boosting energy yield without the cost of an extra MPPT tracker.
- **Lightweight IP65 enclosure for outdoor install** - At roughly 8.6 kg and IP65-rated, the unit can be mounted directly outdoors (e.g., on a farm building wall) without an additional protective enclosure, reducing on-site installation costs.
- **Scalable via parallel operation** - Units in this series can be paralleled (up to around 16 units per manufacturer documentation), allowing an off-grid system to scale from a single cabin to a larger household or commercial site without replacing hardware.


### Cons

- **Single-phase only** - The SUN-OG03LP1 series is available only in single-phase configuration (3-8.8 kW), limiting its use in larger three-phase installations compared to competing off-grid platforms (e.g., Victron Quattro) that natively support three-phase setups.
- **Limited number of native MPPT inputs** - The manufacturer's own reliance on 2x PV oversizing points to a limited number of physical MPPT inputs in this series, forcing string-design compromises compared to inverters offering 3-4 independent MPPTs.
- **No grid-export capability** - As a pure off-grid inverter, the series lacks a hybrid mode for exporting surplus energy to the utility grid, ruling it out for prosumer installations that want to combine self-consumption with grid feed-in revenue.


## About this series

The Deye SUN-OG03LP1 series comprises off-grid inverters engineered for installations fully disconnected from the utility grid or operating as standalone power microsystems. This lineup solves the problem of power interruptions in rural areas, farms, cabins, and industrial sites lacking a stable grid connection. Thanks to **ultra-fast 4ms switching**, the inverter protects sensitive loads from power loss even during sudden changes in operating conditions. The series stands out with its **high battery charge/discharge current**, enabling rapid energy storage and delivery from lead-acid or lithium-ion batteries, with automatic adaptation to the BMS. The **2x PV oversizing** feature maximizes solar energy harvest even with a limited number of MPPTs, lowering the installation cost per unit of energy produced. The lightweight enclosure, weighing just 8.6 kg and rated **IP65**, allows outdoor mounting in harsh weather conditions without an additional protective housing. The inverters can be connected in parallel, increasing power and energy storage capacity for larger households or commercial sites that may need to scale the system in the future. This is a solution for installers seeking reliability and configuration flexibility in off-grid projects.


## Questions


### How fast does the Deye SUN-OG03LP1 switch to battery power when grid supply fails?

The SUN-OG03LP1 series switches between power sources in about 4 ms, fast enough that sensitive loads such as computers, refrigerators, or alarm systems don't experience a voltage drop. This makes the inverter well suited as the primary power source on farms or holiday cottages without a stable grid connection.


### Can the SUN-OG03LP1 inverter be installed outdoors?

Yes, the enclosure has an IP65 rating and weighs only 8.6 kg, allowing outdoor mounting without an additional protective housing, even in harsh weather, rain, or dusty conditions. The lightweight design also simplifies transport and installation in hard-to-reach locations, such as the exterior wall of a utility building.


### How many PV panels can be connected to the SUN-OG03LP1 thanks to 2x PV oversizing?

The 2x PV oversizing feature allows connecting PV array power up to twice the inverter's rated output, despite a limited number of MPPT inputs. In practice, this lets installers add more panels at a lower cost per unit of energy produced, which is especially useful in cloudy conditions or on roofs with suboptimal tilt.


### Which batteries are compatible with the Deye SUN-OG03LP1 inverter?

The inverter supports both lead-acid and lithium-ion batteries, with automatic communication and parameter matching to the BMS. High charge and discharge current enables fast energy storage and release, which is important for off-grid systems with large swings in power demand.


### Can multiple SUN-OG03LP1 inverters be combined into a larger off-grid system?

Yes, units in this series can be connected in parallel to increase both output power and stored energy capacity. This makes them a good fit for households or commercial sites planning to expand their power system later without replacing the entire setup.


### What warranty comes with the Deye SUN-OG03LP1 series?

The standard manufacturer warranty is 5 years, extendable up to 10 years after registration, depending on the country of installation and local distributor terms. It's worth confirming the current warranty policy with the seller before purchase, as conditions can vary by market.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/BDatasheetSUN-3-88K-OG03LP1-EU-AM220261015en-ceaed14dd040.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [PowMr POW-HVM8.2M](https://comparepv.com/inverter/powmr-pow-hvm8-2m) | 8.2 kW |  |  | 14.2 kg | -0.6 kW, 5.6 kg heavier |
| [Growatt SPF 8000T DVM](https://comparepv.com/inverter/growatt-spf-8000t-dvm) | 8 kW |  |  | 64.0 kg | -0.8 kW, 55.4 kg heavier |
| [Growatt SPF 8000T DVM-MPV](https://comparepv.com/inverter/growatt-spf-8000t-dvm-mpv) | 8 kW |  |  | 64.0 kg | -0.8 kW, 55.4 kg heavier |
| [Easun Power ISolar SMW 8KW](https://comparepv.com/inverter/easun-power-isolar-smw-8kw) | 8 kW |  |  | 18.4 kg | -0.8 kW, 9.8 kg heavier |
| [Easun Power ISolar SMW II 8000](https://comparepv.com/inverter/easun-power-isolar-smw-ii-8000) | 8 kW |  |  | 20.0 kg | -0.8 kW, 11.4 kg heavier |
| [Easun Power ISolar SWP 8000](https://comparepv.com/inverter/easun-power-isolar-swp-8000) | 8 kW |  |  | 33.0 kg | -0.8 kW, 24.4 kg heavier |
| [SRNE ASP4880S180-H](https://comparepv.com/inverter/srne-asp4880s180-h) | 8 kW |  | 2 | 27.0 kg | -0.8 kW, 18.4 kg heavier |
| [SRNE ASP4880SH3](https://comparepv.com/inverter/srne-asp4880sh3) | 8 kW |  | 2 | 27.0 kg | -0.8 kW, 18.4 kg heavier |


---

Source: https://comparepv.com/inverter/deye-sun-8-8k-og03lp1-eu-am2

