---
title: "Deye SUN-6K-SG06LP3-EU-BM2 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Deye SUN-6K-SG06LP3-EU-BM2 6 kW hybrid inverter. Specs: 96.5% European efficiency, 2 MPPT, 800 V max DC input, 20.8 kg, 5 yrs warranty."
source: "https://comparepv.com/inverter/deye-sun-6k-sg06lp3-eu-bm2"
updated: 2026-11-05
---

# Deye SUN-6K-SG06LP3-EU-BM2


## Identity

- **Manufacturer:** Deye
- **Model:** SUN-6K-SG06LP3-EU-BM2
- **Series:** SUN-SG06LP3-EU-BM2
- **Rated AC power:** 6 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 1,005 inverters from 3 to 6 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.5% | 97.1% | Weak - bottom 15% | 575 |
| MPPT trackers | 2 | 2 | Typical | 59 |
| Max DC input voltage | 800 V | 600 V | Typical | 233 |
| Weight per kW | 3.5 | 3.9 | Typical | 414 |
| Warranty | 5 yrs | 5 yrs | Typical | 109 |


## Specification


### AC output

- **Rated AC power:** 6 kW
- **Max apparent power:** 6.60 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 10.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading to 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 9.60 kW
- **Max DC voltage:** 800 V
- **MPPT voltage range:** 200 to 650 V
- **Start-up voltage:** 160 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 20.0 A
- **Max short-circuit current per MPPT:** 30.0 A


### Efficiency

- **European efficiency:** 96.5 %
- **Max efficiency:** 97.6 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 40-60V


### Physical

- **Dimensions:** 560 × 334 × 216 mm
- **Weight:** 20.8 kg
- **Enclosure:** IP65
- **Cooling:** natural
- **Noise:** 45 dB
- **Operating temperature:** -40 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 3000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** WIFI, RS485, CAN
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 5 years
- **Certifications:** IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105, IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2


### Pros

- **Low-voltage 48V battery with transformer isolation** - Using a 48V battery with galvanic transformer isolation (instead of common 400-600V high-voltage topologies) meaningfully improves service-side safety and reduces shock risk during installation work, a factor often preferred by installers serving clients with stricter HSE requirements.
- **AC coupling for retrofitting existing PV systems** - AC coupling allows an energy storage system to be added to an already operating PV plant without rewiring the DC side, cutting installation time and retrofit costs compared to solutions requiring a full DC-side overhaul.
- **Parallel operation up to 10 units, on-grid and off-grid** - The ability to cluster multiple inverters (per manufacturer documentation for this product line) with support for multiple batteries in parallel allows scaling power and storage capacity for commercial sites without switching to a higher-power single unit.
- **Six time-slot charge/discharge scheduling** - Six independent time slots for charge/discharge scheduling allow precise matching to dynamic tariffs and consumption profiles - more granular than the standard 2-4 slots offered by many competing hybrids in this price segment.
- **Independent phase support up to 50% rated power** - The ability to deliver up to 50% of rated power on each phase independently in off-grid mode improves supply stability under unbalanced single-phase loads, a meaningful advantage for backup power in buildings with uneven load distribution.


### Cons

- **Limited battery charge current at low 48V voltage** - The low-voltage architecture (40-60V) requires higher operating currents (up to roughly 135-190A for 6-8kW variants) than high-voltage systems, increasing DC cable sizing requirements and potentially causing higher conductor losses compared to competing HV hybrids.
- **Limited service and support outside China** - As a China-based manufacturer (Deye, founded 1990), warranty handling and authorized service center availability in Europe are less developed than for manufacturers with established local service networks (e.g., SMA, Fronius), which can extend response times for fault claims.


## About this series

The SUN-SG06LP3-EU-BM2 series is a three-phase hybrid inverter engineered for installations that need to handle solar generation, energy storage, and backup power simultaneously without compromise. Its defining feature is a **low-voltage 48V battery with transformer isolation**, which significantly improves operational safety compared to high-voltage systems. The unit is a great fit for retrofitting existing PV installations thanks to **AC coupling**, allowing a battery storage system to be added to an already operating solar plant without touching the DC side. For larger sites, the ability to run **up to 10 units in parallel** in both on-grid and off-grid modes, with support for multiple batteries connected in parallel, is a key advantage. Intelligent energy management is handled through a **six time-period charging and discharging schedule**, enabling precise alignment with utility tariffs and consumption profiles. The series also handles unbalanced loads well, delivering up to 50% of rated power independently on each phase, and additionally supports charging from a diesel generator, making it an appealing choice for commercial installations and sites demanding high power reliability.


## Questions


### What is the difference between the low-voltage 48V battery and high-voltage storage systems in Deye inverters?

The SUN-SG06LP3-EU-BM2 series works with low-voltage 48V batteries (40-60V operating range), galvanically isolated from the grid via a transformer. This isolation reduces electric shock risk and simplifies servicing compared to high-voltage 400-500V systems, where an installation error carries greater danger. The trade-off is slightly lower efficiency at very high power levels, but for homes and smaller businesses safety usually outweighs that.


### Can a battery storage system be added to an existing PV installation with the Deye SUN-SG06LP3-EU-BM2 without rebuilding it?

Yes, thanks to AC coupling the inverter can be connected on the AC side to an already operating solar plant, without touching the existing DC wiring or panels. This is especially useful when retrofitting older on-grid installations where the customer wants to add energy storage without dismantling well-functioning PV strings.


### How many Deye SUN-SG06LP3-EU-BM2 inverters can be connected in parallel in one installation?

The series supports parallel operation of up to 10 units, running simultaneously in on-grid and off-grid mode, with support for multiple batteries connected in parallel on a shared bus. This setup is used for larger commercial sites where a single 3-8 kW inverter wouldn't cover demand, and the system needs to scale without replacing already installed units.


### How does the charging schedule work on the Deye SUN-SG06LP3-EU-BM2 inverter, and can it lower electricity bills?

The inverter allows up to six time slots per day for battery charging and discharging. This lets the battery charge during off-peak night tariffs or from excess PV production during the day, then discharge during peak hours when grid electricity is most expensive. In practice this translates into real savings, especially with dynamic or time-of-use tariffs.


### Can the Deye SUN-SG06LP3-EU-BM2 inverter handle unbalanced loads across phases?

Yes, the unit delivers up to 50 percent of rated power on each phase independently, meaning it can supply single-phase loads with uneven consumption without requiring balanced distribution across all three phases. This is a key advantage in homes and commercial buildings where, for example, a kitchen or workshop draws significantly more power on one phase than the others.


### Is the Deye SUN-SG06LP3-EU-BM2 inverter compatible with a diesel or gas generator?

Yes, the series supports battery charging from a generator, which matters for sites requiring high power reliability, such as farms, server rooms, or commercial buildings prone to frequent outages. During extended periods of low sunlight, a generator can top up the battery, maintaining uninterrupted power to critical loads.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/BDatasheetSUN-3-8K-SG06LP3-EU-BM220260911en-A4GN-46f24deeaef6.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolarEdge SE6000H](https://comparepv.com/inverter/solaredge-se6000h) | 6 kW | 99.0% |  | 12.0 kg | +2.5 pp efficiency, 8.8 kg lighter |
| [Sigenergy Sigen Hybrid 6.0 TP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-6-0-tp2) | 6 kW | 98.5% | 2 | 19.5 kg | +2.0 pp efficiency, 1.3 kg lighter |
| [Sigenergy Sigen Hybrid 6.0 SP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-6-0-sp2) | 6 kW | 98.3% | 2 | 11.5 kg | +1.8 pp efficiency, 9.3 kg lighter |
| [Sigenergy SigenStor Neo EC 6.0 TP](https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-6-0-tp) | 6 kW | 98.3% |  | 30.0 kg | +1.8 pp efficiency, 9.2 kg heavier |
| [HYXiPower HYX-H6K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h6k-hsa2) | 6 kW | 98.2% |  | 38.0 kg | +1.7 pp efficiency, 17.2 kg heavier |
| [HYXiPower HYX-H6K-HT](https://comparepv.com/inverter/hyxipower-hyx-h6k-ht) | 6 kW | 98.2% | 2 | 34.0 kg | +1.7 pp efficiency, 13.2 kg heavier |
| [RCT Power 6.0 LAN](https://comparepv.com/inverter/rct-power-6-0-lan) | 6 kW | 97.9% | 2 | 30.0 kg | +1.4 pp efficiency, 9.2 kg heavier |
| [Growatt MOD 6000TL3-HU](https://comparepv.com/inverter/growatt-mod-6000tl3-hu) | 6 kW | 97.8% | 2 | 19.0 kg | +1.3 pp efficiency, 1.8 kg lighter |


---

Source: https://comparepv.com/inverter/deye-sun-6k-sg06lp3-eu-bm2

