---
title: "ATESS HPS60000TL-US-480A Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "ATESS HPS60000TL-US-480A 60 kW hybrid inverter. Specs: 3 MPPT, 1000 V max DC input, 97.0 kg, 10 yrs warranty."
source: "https://comparepv.com/inverter/atess-hps60000tl-us-480a"
updated: 2026-11-14
---

# ATESS HPS60000TL-US-480A


## Identity

- **Manufacturer:** ATESS
- **Model:** HPS60000TL-US-480A
- **Series:** HPS-TL-US-480A
- **Rated AC power:** 60 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 98.2% |  |  |
| MPPT trackers | 3 | 4 | Weak - bottom 17% | 214 |
| Max DC input voltage | 1000 V | 1100 V | Typical | 298 |
| Weight per kW | 1.6 | 1.2 | Weak - bottom 21% | 408 |
| Warranty | 10 yrs | 5 yrs | Strong - top 14% | 8 |


## Specification


### AC output

- **Rated AC power:** 60 kW
- **Max apparent power:** 60.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 480 V
- **Max AC current:** 72.0 A
- **Grid frequency:** 60 Hz
- **Power factor:** 0.8 lagging~0.8 leading
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 90.00 kW
- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 125 to 850 V
- **MPPT trackers:** 3
- **Max input current per MPPT:** 60.0 A
- **Max short-circuit current per MPPT:** 90.0 A


### Battery

- **Battery port:** Yes
- **Battery voltage:** 260-700V
- **Max charge current:** 100.0 A
- **Max discharge current:** 100.0 A
- **Backup power:** 60.00 kW
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 1030 × 600 × 300 mm
- **Weight:** 97.0 kg
- **Enclosure:** Type 3R or IP65
- **Cooling:** forced-air
- **Noise:** 65 dB
- **Operating temperature:** -25 to 55 °C
- **Max humidity:** 95 %
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, CAN, WiFi, 4G
- **Protection:** DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** UL1741, CSA-C22.2


### Pros

- **Grid/off-grid switchover \<10 ms** - Transfer time between on-grid and off-grid operation below 10 ms (confirmed in ATESS official datasheet for the HPS-TL-US-480A series) eliminates power interruption for critical loads, outperforming the typical 20-50 ms seen on many competing ATS-based hybrid inverters.
- **Scalability up to 10 parallel units** - Support for up to 10 units in parallel for both on-grid and off-grid operation allows commercial installations to scale capacity without replacing existing hardware, matching the upper range found among 480V all-in-one hybrid inverters.
- **Built-in AFCI and multiple MPPT inputs** - Integrated PV arc-fault detection (AFCI) combined with multiple MPPT inputs in one compact 480V/277V Wye unit improves installation safety and string configuration flexibility without extra BoS components.
- **Remote generator control and operating modes** - Remote control of a diesel generator plus programmable operating modes (peak shaving, backup, consumption optimization) is a feature set less common at this 60 kW power class, differentiating the series from simpler commercial-grade hybrids.


### Cons

- **No public warranty or MPPT efficiency figures** - Publicly available manufacturer materials (datasheet, user manual) do not disclose a specific MPPT efficiency value or a standard warranty term for this series, making it harder to benchmark against Tier-1 manufacturers (e.g., SMA, Schneider) that publish these figures openly.
- **Limited manufacturer track record** - ATESS was founded in 2017, shorter than most established commercial-grade hybrid inverter brands (10-20+ years), implying fewer long-term field references, particularly for this series released only in 2025.


## About this series

The HPS-TL-US-480A series is an all-in-one hybrid inverter built for small and medium-sized commercial installations on 480V grids. Its standout feature is **seamless on/off grid transfer in under 10 ms**, ensuring critical loads experience no interruption even during a grid outage. The unit combines battery charge controller and PV inverter functions in a single, compact enclosure, eliminating the need for separate BoS components and simplifying both installation and maintenance. With **multi-string MPPT inputs**, the system adapts flexibly to different panel configurations, maximizing solar energy harvest regardless of shading conditions. The series supports **parallel operation of up to 10 units**, allowing site capacity to scale alongside growing energy demand without replacing the entire system. Another differentiator is **remote control of a diesel generator** paired with programmable working modes, enabling automated energy optimization, peak shaving, and backup operation. A transformerless topology and an intuitive touchscreen LCD make daily operation and performance monitoring straightforward. This solution suits businesses, farms, and commercial facilities that need dependable backup power combined with efficient renewable energy management.


## Questions


### How does the ATESS HPS-TL-US-480A differ from a standard grid-tied inverter?

The HPS-TL-US-480A is an all-in-one hybrid inverter combining battery charge controller and PV inverter functions in a single unit. Unlike a standard grid-tied inverter, which only operates when grid power is present, this model automatically switches between grid-connected and off-grid modes in under 10 ms, keeping critical loads powered through grid outages.


### How many HPS-TL-US-480A units can be connected in parallel?

The series supports parallel operation of up to 10 units. This allows the installed power capacity to be scaled in stages by adding more inverters as the facility's energy needs grow, without replacing the already-installed system.


### Does the HPS-TL-US-480A need a separate battery charge controller?

No. The unit integrates a battery charge controller and PV inverter into a single, compact enclosure. This eliminates the need for separate BoS components, reducing installation time, cutting down potential failure points, and simplifying ongoing system servicing.


### Can the HPS-TL-US-480A inverter control a backup generator?

Yes, this model includes remote generator control along with programmable operating modes. This enables automatic generator startup when needed, peak shaving for power demand management, and energy consumption optimization without manual intervention from facility operators.


### What type of installations is the HPS-TL-US-480A series suited for?

The inverter is designed for small and medium commercial installations operating on 480V grids, such as businesses, farms, and service facilities. Multi-string MPPT inputs allow flexible PV array configurations, maximizing solar energy harvest even when different roof sections experience partial shading.


### Does the HPS-TL-US-480A require a transformer, and how is it operated day-to-day?

No, the unit uses a transformerless topology, which improves energy efficiency and reduces the size and weight of the unit compared to transformer-based inverters. Day-to-day operation and monitoring are handled through a clear LCD touchscreen panel, giving quick access to system status without additional software.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/eb555095f041ce348e6f86bdbe7ba655-7e91dcdf1f28.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy 60M1-HYB](https://comparepv.com/inverter/sigenergy-60m1-hyb) | 60 kW | 98.3% |  | 105.0 kg | 8.0 kg heavier |
| [Sigenergy 60M1-HYA](https://comparepv.com/inverter/sigenergy-60m1-hya) | 60 kW | 98.3% |  | 75.0 kg | 22.0 kg lighter |
| [Deye SUN-60K-SG02HP3-EU-EM6](https://comparepv.com/inverter/deye-sun-60k-sg02hp3-eu-em6) | 60 kW | 98.1% | 6 | 105.0 kg | +3 MPPT, 8.0 kg heavier |
| [FoxESS H3-60-Plus](https://comparepv.com/inverter/foxess-h3-60-plus) | 60 kW | 98.1% |  | 115.0 kg | 18.0 kg heavier |
| [FoxESS P3-60-Plus](https://comparepv.com/inverter/foxess-p3-60-plus) | 60 kW | 98.1% |  | 115.0 kg | 18.0 kg heavier |
| [Livoltek HP3-60KS1](https://comparepv.com/inverter/livoltek-hp3-60ks1) | 60 kW | 98.0% | 5 | 80.0 kg | +2 MPPT, 17.0 kg lighter |
| [SRNE IESP600SH3](https://comparepv.com/inverter/srne-iesp600sh3) | 60 kW | 97.6% | 4 | 98.0 kg | +1 MPPT, 1.0 kg heavier |
| [INVT XD60KTR](https://comparepv.com/inverter/invt-xd60ktr) | 60 kW | 97.5% | 4 | 92.0 kg | +1 MPPT, 5.0 kg lighter |


---

Source: https://comparepv.com/inverter/atess-hps60000tl-us-480a

