---
title: "ATESS HPS50000TL Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "ATESS HPS50000TL 50 kW hybrid inverter. Specs: 3 MPPT, 1000 V max DC input, 90.0 kg."
source: "https://comparepv.com/inverter/atess-hps50000tl"
updated: 2026-11-14
---

# ATESS HPS50000TL


## Identity

- **Manufacturer:** ATESS
- **Model:** HPS50000TL
- **Series:** HPS TL
- **Rated AC power:** 50 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 98.2% |  |  |
| MPPT trackers | 3 | 4 | Weak - bottom 17% | 214 |
| Max DC input voltage | 1000 V | 1100 V | Typical | 298 |
| Weight per kW | 1.8 | 1.2 | Weak - bottom 16% | 434 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 50 kW
- **Max apparent power:** 55.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 72.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 lagging~0.8 leading
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 100.00 kW
- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 125 to 850 V
- **MPPT trackers:** 3
- **Max input current per MPPT:** 20.0 A
- **Max short-circuit current per MPPT:** 20.0 A


### Battery

- **Battery port:** Yes
- **Battery voltage:** 150-800V
- **Max charge current:** 100.0 A
- **Max discharge current:** 100.0 A
- **Backup power:** 50.00 kW
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 990 × 600 × 280 mm
- **Weight:** 90.0 kg
- **Enclosure:** IP65
- **Cooling:** forced-air
- **Noise:** 65 dB
- **Operating temperature:** -40 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 5000 m


### Connectivity and protection

- **Interfaces:** Display
- **Protocols:** RS485, CAN
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Certifications:** CE, EN IEC 61000-6-4:2019, EN 61000-3-12:2011, EN IEC 61000-3-11:2019, EN IEC 61000-6-2:2019, EN62109-1:2010, EN62109-2:2011, NRS097-2-1:2017, AS4777.2


### Pros

- **Seamless switching under 10 ms** - The built-in ATS enables transfer between grid, generator and off-grid operation in under 10 ms, faster than the typical 20-50 ms seen in competing commercial hybrids without a dedicated ATS. This protects critical loads (cold storage, servers, production lines) from power interruptions.
- **IP65 enclosure for outdoor mounting** - The IP65 protection rating allows direct outdoor installation without a dedicated switchgear room or canopy, reducing civil works costs compared to IP20/IP21 units that require indoor placement.
- **Scalable up to 10 parallel units** - Parallel operation of up to 10 HPS TL units allows scaling from roughly 15-50 kW per unit to several hundred kW without replacing hardware, extending the investment's lifespan as a commercial facility grows.
- **Multi-input MPPT for flexible PV design** - Available variants (e.g. HPS30000TL with 2 MPPTs, 125-850 VDC range) allow splitting the PV array across strings with different orientation and shading, improving actual yield on irregular commercial rooftops.
- **Compliance with international standards** - Product documentation lists CE, EN62109 and AS4777.2 compliance, easing deployment of the series in European and Australian markets without additional local certification.


### Cons

- **Inconsistent parallel-unit limits across HPS family** - While the TL series claims up to 10 parallel units, larger HPS models (30/50/100/120/150) in ATESS documentation state an 8-unit limit - this inconsistency in vendor materials can mislead installers designing larger multi-unit arrays.
- **No publicly available, independent pricing** - ATESS does not publish pricing for the HPS TL series, and regional distributors only show stock availability without rates - this makes it harder to benchmark cost per kWp against tier-1 competitors (e.g. Deye, Sungrow) without a direct quote request.


## About this series

The ATESS HPS TL series consists of three-phase, all-in-one hybrid inverters built for small and medium commercial installations where power reliability and configuration flexibility matter most. These units feature a **built-in ATS (automatic transfer switch)**, allowing a site to shift seamlessly between the utility grid, a diesel generator, and off-grid operation without interrupting the power supply. A key advantage is the **seamless on/off-grid transfer in under 10 ms**, protecting critical loads from the effects of voltage interruptions - essential for retail stores, workshops, farms, or small production facilities. The inverters come in a **sealed IP65-rated enclosure**, enabling outdoor installation without extra protective infrastructure and reducing installation costs. Thanks to **parallel operation of up to 10 units**, the HPS TL series scales alongside a growing installation - from tens of kilowatts up to capacities approaching large commercial systems - without requiring equipment replacement. Multiple MPPT inputs give installers the flexibility to design PV arrays with varied orientation and shading conditions, while remote generator control and programmable working modes simplify integration with a site's existing power infrastructure. This is a solution for installers seeking a compact, weatherproof hybrid device for commercial applications that demand uninterrupted power continuity.


## Questions


### Will the ATESS HPS TL inverter keep a shop or workshop powered during a grid outage?

Yes, this is one of the series' core functions. The built-in ATS switches power between the grid, a generator, and off-grid operation in under 10 ms, which is unnoticeable to most equipment. This means cash registers, refrigeration units, or workshop machinery won't shut down during a brief voltage drop, which matters for small and mid-sized businesses that depend on uninterrupted power.


### How does the built-in ATS in the HPS TL differ from an external grid transfer switch?

An external ATS requires extra wiring, additional installation work, and typically introduces a noticeable power interruption of tens to hundreds of milliseconds. In the HPS TL, the ATS is integrated into the inverter and switches power in under 10 ms, with no interruption noticeable to electronic equipment. This simplifies installation, lowers material costs, and removes one more component that could desync or fail.


### How many ATESS HPS TL units can be paralleled, and how large can the system scale?

The HPS TL series supports parallel operation of up to 10 units, scaling system power from tens of kilowatts up to levels typical of larger commercial systems. In practice, a business can start with a single inverter and add more units as energy demand grows, without replacing the equipment already installed, protecting the initial investment.


### Can the HPS TL inverter be installed outdoors without a canopy or shelter?

Yes, the HPS TL enclosure has an IP65 rating, meaning it is dust-tight and protected against water jets, allowing outdoor installation without any additional sheltering infrastructure. This means installers don't need to build a canopy or technical cabinet, which shortens installation time and reduces costs, especially on farms and small production facilities where indoor space is limited.


### How many MPPT inputs does the ATESS HPS TL series have, and how does that affect PV array design?

The HPS TL is equipped with a multi-input MPPT system, allowing several independent PV strings with different orientations, tilt angles, or shading conditions to connect to a single inverter. For installers, this means greater freedom in laying out panels on a roof or across multiple roofs at once, without losing energy yield to averaged operating parameters across the whole PV array.


### Can the ATESS HPS TL be integrated with a backup generator on site?

Yes, the inverter supports remote generator control and programmable operating modes, enabling automatic generator start-up when needed and smooth switching between the grid, the generator, and battery storage or off-grid operation. This simplifies integration with a facility's existing backup power infrastructure, removing the need for staff to manually operate transfer switches.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/0e229fe02adaa24fff741920b022870c-2b513031eb64.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy 50M1-HYB](https://comparepv.com/inverter/sigenergy-50m1-hyb) | 50 kW | 98.3% |  | 102.0 kg | 12.0 kg heavier |
| [Sigenergy 50M1-HYA](https://comparepv.com/inverter/sigenergy-50m1-hya) | 50 kW | 98.3% |  | 72.0 kg | 18.0 kg lighter |
| [Afore AF50K-TH](https://comparepv.com/inverter/afore-af50k-th) | 50 kW | 98.3% | 4 | 70.0 kg | +1 MPPT, 20.0 kg lighter |
| [FoxESS H3-50-Plus](https://comparepv.com/inverter/foxess-h3-50-plus) | 50 kW | 98.1% |  | 115.0 kg | 25.0 kg heavier |
| [FoxESS P3-50-Plus](https://comparepv.com/inverter/foxess-p3-50-plus) | 50 kW | 98.1% |  | 115.0 kg | 25.0 kg heavier |
| [Livoltek HP3-50KS1](https://comparepv.com/inverter/livoltek-hp3-50ks1) | 50 kW | 98.0% | 5 | 80.0 kg | +2 MPPT, 10.0 kg lighter |
| [HYXiPower HYX-H50K-ET](https://comparepv.com/inverter/hyxipower-hyx-h50k-et) | 50 kW | 98.0% |  | 95.0 kg | 5.0 kg heavier |
| [GoodWe GW50K-ET-10](https://comparepv.com/inverter/goodwe-gw50k-et-10) | 50 kW | 97.8% |  | 65.0 kg | 25.0 kg lighter |


---

Source: https://comparepv.com/inverter/atess-hps50000tl

