---
title: "ATESS HPS150HV Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "ATESS HPS150HV 150 kW hybrid inverter. Specs: 2 MPPT, 1500 V max DC input."
source: "https://comparepv.com/inverter/atess-hps150hv"
updated: 2026-11-14
---

# ATESS HPS150HV


## Identity

- **Manufacturer:** ATESS
- **Model:** HPS150HV
- **Series:** HPSHV
- **Rated AC power:** 150 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 238 inverters from 100 to 500 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 98.5% |  |  |
| MPPT trackers | 2 | 8 | Weak - bottom 20% | 142 |
| Max DC input voltage | 1500 V | 1100 V | Strong - top 23% | 1 |
| Weight per kW | - | 0.7 |  |  |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 150 kW
- **Max apparent power:** 165.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 238.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 lagging ~ 0.8 leading


### PV input

- **Max DC input power:** 240.00 kW
- **Max DC voltage:** 1500 V
- **MPPT voltage range:** 900 to 1300 V
- **MPPT trackers:** 2


### Battery

- **Battery port:** Yes
- **Battery voltage:** 600 V ~ 900 V


### Physical

- **Enclosure:** IP20
- **Cooling:** forced-air
- **Operating temperature:** -25 to 55 °C


### Warranty and certificates

- **Certifications:** NRS 097-2-1: 2024 Edition 3


### Pros

- **Isolated topology for added safety** - The HPSHV series uses a transformer-based isolated topology, providing extra galvanic separation between the PV/battery side and the grid. This improves installation safety and operating stability under demanding grid conditions compared to transformerless inverters.
- **Direct 600-900V BESS connection** - The HPS100HV and HPS150HV support direct connection of high-voltage energy storage in the 600-900V range without an additional DC/DC converter, reducing BoS cost and component count in C&I installations.
- **10 ms on/off-grid switching** - Transfer time between grid-tied and island operation is only 10 ms, outperforming the typical 4-20 ms found in comparable commercial hybrid inverters, minimizing power interruptions for critical loads.
- **Flexible PV configuration via dual MPPT** - Two independent MPPT trackers plus a wide PV input voltage range (manufacturer recommends string voltage 50-200V above max battery voltage) allow flexible matching of module configurations across different C&I projects.
- **Scalable parallel operation** - Units can be paralleled up to 8 inverters in both on-grid and off-grid operation, enabling system builds up to roughly 1200 kW from a single series without moving to larger, separate PCS units.


### Cons

- **No independent third-party testing** - Key parameters, including the 10 ms on/off-grid transfer time and stated efficiency figures, come solely from manufacturer materials - no publicly available independent efficiency, thermal, or durability testing from third-party labs was found.
- **Limited IP20 ingress protection** - The HPSHV series carries an IP20 rating, requiring indoor or sheltered installation, unlike competing tier-1 commercial inverters (e.g., Huawei, Sungrow) available in outdoor IP65 variants, which can increase on-site infrastructure costs.
- **Short market track record** - ATESS was founded in 2017, and the HPSHV series launched in 2024 - a notably shorter reference deployment history compared to segment leaders in industrial storage with over a decade of track record, which may matter when assessing long-term service risk.


## About this series

The ATESS HPSHV series (HPS100HV, HPS150HV) is a lineup of commercial and industrial hybrid inverters built for high-voltage battery storage paired with large-scale solar arrays. Its defining feature is an **isolated topology**, delivering extra galvanic safety and stable operation even under demanding grid conditions. The inverters support **direct high-voltage battery connection** in the 600-900 V range, removing the need for an additional DC/DC converter, which lowers BoS costs and simplifies the overall system architecture. With **dual MPPT** inputs and a wide PV voltage window, the units adapt flexibly to different string configurations, including installations with numerous module strings. Another standout advantage is the **10-millisecond on/off-grid transfer**, which virtually eliminates power interruptions to critical loads during grid outages. Intelligent air cooling and a broad operating temperature range make the series well suited for commercial and industrial deployments, including C&I projects that combine solar generation with energy storage. It's a strong fit for system integrators and investors looking for a compact, safe, and scalable alternative to traditional inverter-plus-separate-battery-converter setups.


## Questions


### What is the difference between the ATESS HPS100HV and HPS150HV?

Both models belong to the same isolated HPSHV platform but differ in power rating and throughput. The HPS100HV accepts up to 150 kWp of DC input (PV or battery), while the HPS150HV supports up to 225 kWp. The HPS150HV also has a higher maximum battery charge current. Model choice depends on the planned PV system size and the high-voltage battery storage capacity in the project.


### Does the battery storage need to be connected through an additional DC/DC converter?

No, this is the key advantage of the HPSHV series. The inverter accepts high-voltage battery storage directly in the 600-900 V range, without an intermediate DC/DC converter. This removes one component from the system architecture, lowers BoS costs, reduces points of failure, and simplifies maintenance compared to an inverter-plus-separate-battery-converter setup.


### How fast does the HPSHV inverter switch to island mode during a grid outage?

Switching between grid-tied (on-grid) and island (off-grid) operation takes just 10 milliseconds. For typical commercial and industrial loads, this transition is virtually unnoticeable, meaning critical equipment such as servers, cold storage, or production lines will not experience a power interruption during a grid failure.


### Can ATESS HPSHV inverters operate in harsh temperature conditions?

Yes, the series is rated for an operating range of -25°C to +55°C, which covers year-round climate conditions in most European markets. Intelligent forced-air cooling with automatic fan speed control keeps the unit stable under high load on hot days, while reducing cooling-related power consumption during cooler periods.


### Does a PV installation with multiple string configurations require several HPSHV inverters?

Not necessarily. HPSHV inverters feature dual MPPT with a wide input voltage range, allowing a single unit to handle strings that differ in module count, orientation, or shading. This lets designers combine separate roof or ground-mount sections within one inverter instead of installing a dedicated unit for each string configuration.


### What warranty applies to ATESS HPSHV series inverters?

ATESS typically provides a multi-year warranty on its hybrid inverters, but the exact duration and scope, including any available extensions, depend on the distributor and the market where the unit is sold. Buyers should confirm the specific warranty terms with their local distributor before purchase, as coverage may require unit registration or installation by an authorized technician.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/9e772b63b613b68e1f56ee2208a01945-c03fd25e114c.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [KACO gridsave 150 TL3-S GEN2](https://comparepv.com/inverter/kaco-gridsave-150-tl3-s-gen2) | 150 kW |  |  | 80.0 kg | Similar on paper |
| [ATESS HPS150](https://comparepv.com/inverter/atess-hps150) | 150 kW |  |  | 1230.0 kg | Similar on paper |
| [ATESS HPS150-US](https://comparepv.com/inverter/atess-hps150-us) | 150 kW |  |  | 1200.0 kg | Similar on paper |
| [KACO gridsave 137 TL3-S GEN2](https://comparepv.com/inverter/kaco-gridsave-137-tl3-s-gen2) | 137 kW |  |  | 80.0 kg | -13.0 kW |
| [Sigenergy 125M1-HYB](https://comparepv.com/inverter/sigenergy-125m1-hyb) | 125 kW | 98.3% |  | 108.0 kg | -25.0 kW |
| [Sigenergy 125M1-HYA](https://comparepv.com/inverter/sigenergy-125m1-hya) | 125 kW | 98.3% |  | 95.0 kg | -25.0 kW |
| [Deye SUN-125K-SG02HP3-EU-GM10](https://comparepv.com/inverter/deye-sun-125k-sg02hp3-eu-gm10) | 125 kW | 98.1% | 10 | 161.7 kg | -25.0 kW, +8 MPPT |
| [FoxESS H3-125-Plus](https://comparepv.com/inverter/foxess-h3-125-plus) | 125 kW | 98.1% |  | 120.0 kg | -25.0 kW |


---

Source: https://comparepv.com/inverter/atess-hps150hv

