---
title: "SUNSYNK-L3.0 2.76 kWh Battery: Specs & Datasheet | ComparePV"
description: "SUNSYNK-L3.0 2.76 kWh home battery. Specs: 3.1 kW continuous, 6000 cycles, 30.0 kg."
source: "https://comparepv.com/battery/sunsynk-sunsynk-l3-0"
updated: 2026-11-15
---

# SUNSYNK-L3.0


## Identity

- **Manufacturer:** Sunsynk
- **Model:** SUNSYNK-L3.0
- **Series:** Sunsynk L
- **Usable energy:** 2.76 kWh
- **Voltage class:** Low voltage
- **Cell technology:** LFP


## How it compares

Compared against 190 batteries up to 6 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 1.11 | 0.88 | Strong - top 16% | 24 |
| Cycle life | 6000 | 6000 | Typical | 30 |
| Weight per kWh | 10.9 | 10.7 | Typical | 96 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 2.76 kWh
- **Nominal energy:** 3.07 kWh
- **Depth of discharge:** 90 %
- **Max system capacity:** 11.0 kWh
- **Units in parallel:** 4


### Power

- **Continuous discharge power:** 3.07 kW
- **Continuous charge power:** 3.07 kW
- **Peak discharge power:** 3.84 kW
- **Max discharge current:** 60 A
- **Max charge current:** 60 A
- **Peak discharge current:** 75 A


### Efficiency and lifetime

- **Cycle life:** 6000 cycles
- **Capacity at end of life:** 70 %


### Cells and voltage

- **Voltage class:** Low voltage
- **Nominal voltage:** 51.2 V
- **Operating voltage:** 43 to 58 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 520 × 440 × 145 mm
- **Weight:** 30.0 kg
- **Enclosure:** IP65
- **Mounting:** wall
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Protocols:** CAN2.0, RS485


### Warranty and certificates

- **Warranted cycles:** 6000 cycles
- **Warranted throughput:** 10.0 MWh
- **Certifications:** IEC62619, CE, UKCA, CEC, UN38.3


### Pros

- **Modular scalability up to 163.8 kWh** - L5.1 units (5.12 kWh each) can be paralleled up to 32 modules, scaling the system to roughly 163.8 kWh without replacing the existing installation - a rarely matched flexibility level in the residential ESS segment.
- **IP65 ingress protection rating** - The dust- and water-jet-resistant enclosure allows outdoor, garage, or utility-room installation without an additional protective cabinet, setting the L series apart from many competing LiFePO4 batteries limited to indoor use only (some tier peers offer only IP20).
- **Safe LiFePO4 chemistry** - Lithium iron phosphate cells provide high thermal stability and a lower thermal-runaway risk compared to NMC cells, which matters for residential and enclosed-space installations.
- **Standard CAN/RS485 communication** - The built-in BMS communicates with the inverter via widely supported CAN2.0 and RS485 protocols, easing integration with most popular hybrid inverters on the market, not only Sunsynk units.
- **Configurations spanning multiple scales** - Variants from the L3.0 (3.07 kWh, up to 4 units = 12 kWh) to the L5.1/L5.3 (approx. 5.1-5.32 kWh) cover both small residential systems and larger multi-module setups within a single product line.


### Cons

- **Discontinued production** - The Sunsynk L series (including the L5.3) has been discontinued following the end of the licensing agreement with the previous cell manufacturer, meaning limited availability of service, spare parts, and add-on modules for existing systems.
- **Expansion compatibility issues** - Per distributor notices, current Sunsynk-branded batteries (now manufactured under the Eenovance label) are incompatible with earlier 5.32/10.65/15.97 kWh L-series models, making it difficult to add modules to existing installations without replacing the entire battery stack.
- **Inconsistent technical documentation** - Publicly available datasheet revisions (v5, v6, v7) for the same models (e.g., L5.1) show conflicting specs, such as unit weight listed as both 46 kg and 50 kg, indicating documentation inconsistency as the series was being phased out.


## About this series

The Sunsynk L series comprises modular energy storage units built on lithium iron phosphate (LiFePO4) cells, designed to scale alongside a project's needs - from small residential homes to larger commercial systems. The standout feature of this lineup is its **modular design allowing multiple units to be connected in parallel**, so installers and homeowners aren't locked into a single fixed capacity from day one and can expand storage later without replacing the whole setup. The LiFePO4 chemistry delivers **a high level of thermal safety** and stable performance across a wide range of operating conditions, which matters when batteries are installed in garages, utility rooms, or outdoor enclosures. An **IP65-rated enclosure** allows placement in locations exposed to dust and moisture, setting this series apart from many competing batteries restricted to indoor use only. A built-in BMS monitors cell health and communicates with the inverter via standard CAN and RS485 protocols, simplifying integration with most popular hybrid inverters on the market. The L series is well suited for installers looking for a flexible, safe, and easy-to-configure solution for storing solar energy, whether for new installations or upgrades to existing systems.


## Questions


### How many Sunsynk L battery modules can be connected in parallel, and what's the maximum system capacity?

The limit depends on the specific model. The smallest L3.0 unit supports up to 4 modules in parallel (around 12 kWh total), while the larger L5.1 and L5.3 modules can be stacked up to 32 units, reaching system capacities of roughly 160-170 kWh. This lets installers start with a single module and scale the energy storage system in stages without replacing already-installed hardware.


### What warranty applies to the Sunsynk L series batteries?

Warranty terms vary by specific model - the manufacturer typically offered periods of 5 to 10 years, with coverage ending whichever comes first: the time period or a throughput limit (around 8-16 MWh). Since terms are not uniform across the series, it's worth checking the datasheet for the exact unit (L3.0, L5.1, or L5.3) before purchase.


### Can a Sunsynk L battery be installed in a garage or outdoors?

Yes, the L series modules feature an IP65-rated enclosure, meaning resistance to dust and water jets. This allows installation in unheated garages, technical rooms, or even outdoors, provided the ambient operating temperature range listed in the datasheet is respected. This sets the L series apart from batteries designed strictly for dry indoor use.


### Which hybrid inverters are compatible with the Sunsynk L battery?

Communication runs through standard CAN and RS485 protocols, which simplifies integration with most popular hybrid inverters, including Sunsynk's own inverter lineup. Before buying, it's still worth checking the current compatibility list with your distributor, since some older or newer inverter and battery models may require a firmware update or might not be officially supported in a given setup.


### Is the Sunsynk L battery series still available for purchase?

No, the Sunsynk L series has been discontinued and is no longer offered as a new product. Sunsynk has replaced it with newer energy storage lines, so customers looking for a current option should ask their distributor about the L series' successor or consider remaining stock, keeping in mind limited future spare-parts and support availability.


### What's the difference between the L3.0 model and the larger L5.1/L5.3 units in this series?

The L3.0 is the smallest and most limited variant - it supports up to 4 modules in parallel, giving around 12 kWh, and suits small residential installations. The L5.1 and L5.3 models offer higher per-unit capacity and a much larger parallel limit (up to 32 modules), making them suitable for larger home systems and commercial installations requiring bigger energy storage capacity.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/1779960125419-Sunsynk_L3-0_Datasheet_v8_English_1148-44edbfc3c56a.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Solarwatt Battery vision top pack 1.0](https://comparepv.com/battery/solarwatt-battery-vision-top-pack-1-0) | 2.6 kWh | 95.0% |  | LV | -0.2 kWh |
| [Solarwatt Battery vision pack 1.0](https://comparepv.com/battery/solarwatt-battery-vision-pack-1-0) | 2.6 kWh | 95.0% |  | LV | -0.2 kWh |
| [Discover Battery 44-48-3000](https://comparepv.com/battery/discover-battery-44-48-3000) | 2.92 kWh |  |  | LV | +0.2 kWh |
| [Victron Energy LFP-12,8/200](https://comparepv.com/battery/victron-energy-lfp-12-8-200) | 2.56 kWh | 92.0% | 2.6 kW | LV | -0.2 kWh, -0.5 kW |
| [Victron Energy LFP-25,6/100](https://comparepv.com/battery/victron-energy-lfp-25-6-100) | 2.56 kWh | 92.0% | 2.6 kW | LV | -0.2 kWh, -0.5 kW |
| [Victron Energy LFP-Smart 12,8/200](https://comparepv.com/battery/victron-energy-lfp-smart-12-8-200) | 2.56 kWh | 92.0% | 5.1 kW | LV | -0.2 kWh, +2.1 kW |
| [Victron Energy LFP-Smart 25,6/100](https://comparepv.com/battery/victron-energy-lfp-smart-25-6-100) | 2.56 kWh | 92.0% | 5.1 kW | LV | -0.2 kWh, +2.1 kW |
| [Deye RW-L2.5A](https://comparepv.com/battery/rw-l2-5a) | 2.56 kWh |  | 2.5 kW | LV | -0.2 kWh, -0.6 kW |


---

Source: https://comparepv.com/battery/sunsynk-sunsynk-l3-0

