---
title: "Sungrow ST255CS-2H 257 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "Sungrow ST255CS-2H 257 kWh all-in-one home battery. Specs: 125.0 kW continuous, 3200.0 kg."
source: "https://comparepv.com/battery/sungrow-st255cs-2h"
updated: 2026-11-14
---

# Sungrow ST255CS-2H


## Identity

- **Manufacturer:** Sungrow
- **Model:** ST255CS-2H
- **Series:** PowerStack
- **Usable energy:** 257 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 93.0% |  |  |
| Power per kWh | 0.49 | 0.52 | Typical | 160 |
| Cycle life | - | 8000 |  |  |
| Weight per kWh | 12.5 | 10.4 | Typical | 177 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 257 kWh
- **Nominal energy:** 257.00 kWh
- **Depth of discharge:** 100 %


### Power

- **Continuous discharge power:** 125.00 kW


### Cells and voltage

- **Voltage class:** High voltage
- **Operating voltage:** 691 to 934 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Thermal management


### Built-in inverter

- **Inverter power:** 125.0 kW
- **Phases:** Three-phase


### Physical

- **Dimensions:** 2450 × 1150 × 1610 mm
- **Weight:** 3200.0 kg
- **Enclosure:** IP55
- **Mounting:** floor
- **Cooling:** liquid
- **Noise:** 65 dB
- **Operating temperature:** -30 to 50 °C


### Compatibility

- **Protocols:** Modbus TCP


### Warranty and certificates

- **Certifications:** IEC 62619, IEC 63056, IEC 62040, IEC 62477, IEC 61000, IEC 62933, UN 38.3


### Pros

- **High round-trip efficiency ~90%** - Sungrow states a round-trip efficiency (RTE) of about 90% for the ST225CS-2H system (110 kW/229 kWh), competitive against the C&I segment average (typically 85-88%), translating into lower energy losses per charge/discharge cycle.
- **Liquid cooling with ≤2.5°C cell delta** - The second-generation liquid cooling system keeps the cell temperature difference at ≤2.5°C, which measurably reduces battery pack degradation and lowers the need for oversized cooling in hot climates.
- **Integrated PCS+BMS+EMS architecture** - Housing the PCS, BMS, and EMS in a single plug-and-play enclosure shortens deployment time for C&I installations compared to conventional systems assembled from separate components sourced from multiple vendors.
- **Scalable from container to MW-scale** - Modular parallel unit stacking (e.g., 229 kWh and 458 kWh variants within the same architecture) allows projects to scale from single commercial installations to multi-megawatt storage farms without changing the control platform.
- **Tier-1 manufacturer with 25+ years of experience** - Founded in 1997, Sungrow is recognized as a bankable Tier-1 supplier in BNEF rankings, reducing financial risk for investors and easing project financing for energy storage deployments.


### Cons

- **Limited field operating history** - The PowerStack series launched in 2023, so long-term (5-10 year) field degradation data comparable to older C&I platforms from other Tier-1 manufacturers is not yet available, making full real-world performance assessment harder.
- **No publicly disclosed warranty terms** - Official product materials (factsheet, product page) do not explicitly state warranty length or guaranteed residual capacity after X years, unlike some competitors that publish full degradation schedules - requiring direct contact with a distributor for specifics.


## About this series

The **Sungrow PowerStack** series is a modular C&I energy storage system that packs the power conversion system (PCS), battery management system (BMS), and energy management system (EMS) into a single compact enclosure, removing the need to assemble scattered infrastructure from multiple separate components. This design addresses one of the biggest challenges for commercial and industrial investors: limited installation space and long deployment timelines, thanks to a plug-and-play construction that is ready to operate right after connection. What sets the series apart is its **AI-controlled liquid cooling**, which keeps cell temperatures balanced and extends battery lifespan even under demanding climate conditions. The system also provides **multi-level fire protection** with flammable gas and smoke detection, a critical feature for safety in commercial and industrial installations. PowerStack enables flexible scaling by connecting multiple units in parallel, allowing projects to grow from a single cabinet to multi-megawatt installations without changing the system architecture. Thanks to its **open integration with third-party EMS platforms** and Modbus TCP communication, the series works equally well as a standalone storage deployment or in hybrid configurations with PV inverters. It is a solution built for businesses seeking a compact, safe, and easily scalable energy storage system that adapts to changing operational needs.


## Questions


### What is the difference between a single PowerStack unit and a multi-megawatt installation?

PowerStack is a modular energy storage system where a single unit integrates the PCS, BMS, and EMS, typically delivering around 110 kW of power and roughly 230 to over 450 kWh of capacity depending on the variant. A multi-megawatt installation is simply built by connecting multiple units in parallel, without changing the system architecture - up to several dozen containers on one site, reaching several MWh of total capacity.


### What is PowerStack's intelligent liquid cooling, and does it actually extend battery lifespan?

It is an AI-controlled liquid cooling system that continuously equalizes cell temperature within the module, keeping the temperature spread between cells to around 2.5°C or less. This uniformity limits accelerated degradation of individual cells and genuinely extends battery lifespan, particularly in installations operating in hot climates or under heavy cycling loads.


### What round-trip efficiency does the PowerStack system achieve?

The PowerStack energy storage system achieves a system round-trip efficiency (RTE) of at least 90%. This means that for every 100 kWh of energy fed into the storage, you recover a minimum of 90 kWh, which translates into real savings on energy losses in commercial and industrial installations.


### Can PowerStack be integrated with a PV inverter from a brand other than Sungrow?

Yes. The series communicates via the Modbus TCP standard and offers open integration with third-party EMS platforms, so you are not locked into the Sungrow ecosystem alone. PowerStack can be deployed as a standalone energy storage system or in a hybrid configuration alongside an existing PV installation based on other manufacturers' inverters.


### What fire protection does PowerStack have, and is it suitable for industrial sites?

PowerStack features multi-layered fire protection with gas and smoke detection built in at the battery module level, enabling very early detection before a fire can develop. Combined with its compact, sealed enclosure and C&I-class certification, the system is designed specifically to meet the strict safety requirements of commercial and industrial facilities.


### How does PowerStack deployment time compare to a conventional system with separate components?

PowerStack uses a plug-and-play design where the PCS, BMS, and EMS are factory-integrated into a single enclosure. This eliminates the time-consuming on-site wiring and configuration of multiple separate devices, significantly shortening deployment time compared to traditional, distributed energy storage systems.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/b4f56963-dbd2-4c43-8cbc-0808eb4cf083-5a61e328f1b6.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [WeCo 16K0 HV 257.1 kWh](https://comparepv.com/battery/weco-16k0-hv-257-1-kwh) | 257.1 kWh |  |  | HV | +0.1 kWh |
| [BSLBATT S314-16](https://comparepv.com/battery/bslbatt-s314-16) | 257.23 kWh |  |  | HV | +0.2 kWh |
| [Dyness BF200-C260](https://comparepv.com/battery/dyness-bf200-c260) | 261 kWh | 94.0% |  | HV | +4.0 kWh |
| [Dyness DH200Y-C260](https://comparepv.com/battery/dyness-dh200y-c260) | 261 kWh | 90.0% | 125.0 kW | HV | +4.0 kWh |
| [SAJ CM2-99.9K-261-EU](https://comparepv.com/battery/saj-cm2-99-9k-261-eu) | 261 kWh | 90.0% | 99.9 kW | HV | +4.0 kWh, -25.1 kW |
| [SAJ CM2-125K-261-EU](https://comparepv.com/battery/saj-cm2-125k-261-eu) | 261 kWh | 90.0% | 125.0 kW | HV | +4.0 kWh |
| [Dyness DH200F-C260P124-S0](https://comparepv.com/battery/dyness-dh200f-c260p124-s0) | 261 kWh | 88.0% | 124.9 kW | HV | +4.0 kWh |
| [Dyness DH200F-C260P125-S0](https://comparepv.com/battery/dyness-dh200f-c260p125-s0) | 261 kWh | 88.0% | 125.0 kW | HV | +4.0 kWh |


---

Source: https://comparepv.com/battery/sungrow-st255cs-2h

