---
title: "Sungrow ST250CF 249.6 kWh Battery: Specs & Datasheet | ComparePV"
description: "Sungrow ST250CF 249.6 kWh home battery. Specs: 124.8 kW continuous, 10 yrs warranty."
source: "https://comparepv.com/battery/sungrow-st250cf"
updated: 2026-11-14
---

# Sungrow ST250CF


## Identity

- **Manufacturer:** Sungrow
- **Model:** ST250CF
- **Series:** PowerKeeper
- **Usable energy:** 249.6 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 93.0% |  |  |
| Power per kWh | 0.50 | 0.52 | Typical | 130 |
| Cycle life | - | 8000 |  |  |
| Weight per kWh | - | 10.4 |  |  |
| Warranty | 10 yrs | 10 yrs | Typical | 6 |


## Specification


### Capacity

- **Usable energy:** 249.6 kWh
- **Nominal energy:** 249.60 kWh
- **Depth of discharge:** 100 %
- **Module energy:** 49.90 kWh
- **Modules per stack:** 1 to 5
- **Max system capacity:** 249.5 kWh
- **Units in parallel:** 4


### Power

- **Continuous discharge power:** 124.80 kW
- **Continuous charge power:** 124.80 kW
- **Max discharge current:** 162 A
- **Max charge current:** 162 A
- **Peak discharge current:** 192 A


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 768.0 V
- **Operating voltage:** 648 to 876 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Active balancing, Thermal management


### Physical

- **Enclosure:** IP66
- **Mounting:** floor
- **Cooling:** active-air
- **Noise:** 60 dB
- **Operating temperature:** -20 to 55 °C


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** IEC62619, IEC63056, UN38.3, IEC62477-1, IEC62040, IEC61000-6-1/6-3, IEC62933-5-2, UL9540A


### Pros

- **Scalable from 50 kWh to 1000 kWh in one system** - A single stack scales from 50 kWh to 250 kWh, and optional junction boxes let multiple clusters be combined up to 1000 kWh with up to 8 hours of storage duration in one integrated setup. This enables phased expansion without replacing the entire infrastructure, unlike rigid, one-off designed competitor systems.
- **Mixed-module support with active balancing** - The system allows combining new and older battery packs with active balancing, eliminating the need to replace the entire battery fleet when expanding - a rare capability in the C&I segment, where most manufacturers require homogeneous module batches.
- **Multi-level thermal propagation protection** - Pack-level smoke detection and a pressure relief valve, combined with an enhanced-sealing enclosure (per manufacturer data, IP66-rated), ensure safety in demanding field conditions - important for outdoor installations lacking additional structural protection.
- **Tier-1, bankable manufacturer since 1997** - Sungrow has operated since 1997 and claims over 1,000 C&I energy storage projects worldwide, including roughly 200 in Europe, providing a real service network and bankability for project financing - a notable advantage over smaller, newer ESS brands.
- **Instant island-mode switchover and remote EMS** - Immediate switching to off-grid operation protects continuity of power for critical loads, while OTA update and predictive diagnostics integration allow connection to existing EMS and metering infrastructure without replacing measurement equipment.


### Cons

- **Limited field track record** - The series was publicly unveiled in November 2025 (Sungrow European C&I ESS Summit), meaning as of November 2026 it has only about one year of commercial availability - independent, multi-year operational data is lacking compared to established C&I competitor lines.
- **Test claims not independently verified** - The manufacturer claims PowerKeeper is the first modular C&I ESS to pass seven extreme challenge tests, but this information comes solely from Sungrow's own marketing materials - no confirmation from an independent test lab (e.g., TÜV, UL) was found.


## About this series

The PowerKeeper ST050-250CF is a modular C&I energy storage system built as a pre-assembled, stacked LFP battery platform that cuts installation time even on demanding retrofit projects. The series solves the problem of rigid, one-off installations - thanks to its **scalable design from a single 50 kWh stack up to 250 kWh**, plus optional battery junction boxes that extend capacity up to 1000 kWh, it suits a small manufacturing facility just as well as a large industrial site planning phased expansion. A key advantage is **support for mixed new and aged modules with active balancing**, eliminating the need to replace an entire system when expanding the battery fleet. On the safety side, it stands out with **multi-layer thermal runaway protection**, featuring smoke detection and a pack-level explosion relief valve, while its enhanced flood-resistant enclosure keeps it reliable in demanding field conditions. Integrators will also value its **near-instant transfer to off-grid operation**, which safeguards continuity for critical loads, along with smart remote monitoring that delivers OTA updates and predictive diagnostics, integrating smoothly with existing EMS platforms and meters without requiring new metering infrastructure.


## Questions


### How do you scale a Sungrow PowerKeeper ST050-250CF energy storage system beyond 250 kWh?

A single PowerKeeper stack scales from 50 kWh to 250 kWh by adding additional LFP battery modules. When energy needs grow further, installers can connect optional junction boxes to link multiple stacks into one system reaching up to 1000 kWh. This lets a business start with a smaller investment and expand the storage capacity in stages, without redesigning the entire installation.


### Can older battery modules be added to a PowerKeeper system without replacing the whole unit?

Yes, this is one of the series' key advantages. PowerKeeper supports mixing new and older modules thanks to active balancing, which equalizes differences in state of charge and cell wear between modules. In practice, this means that when expanding a battery fleet after a few years, there is no need to dismantle and replace the existing energy storage system.


### How does PowerKeeper protect against thermal propagation?

The system uses multi-level thermal propagation protection, including smoke detection and a pressure relief valve installed at the battery pack level. This design limits the spread of a potential thermal event from one module to the rest of the stack, which matters in large C&I installations where many LFP packs operate together in a single stack.


### Can the PowerKeeper ST050-250CF switch to off-grid island mode during a grid outage?

Yes, the system supports an extremely fast switchover to off-grid island mode in the event of a grid failure. For manufacturing facilities or sites with critical loads, this means machines and systems powered from the storage unit don't lose power at the moment of the outage, minimizing downtime and losses from unplanned process shutdowns.


### What warranty does the Sungrow PowerKeeper energy storage system come with?

Warranty terms for C&I systems like PowerKeeper are defined in a dedicated manufacturer warranty letter and can vary by market and system configuration. As a tier-1 manufacturer, Sungrow typically offers multi-year coverage on battery components, but the exact term and conditions should always be confirmed with the local distributor before purchase.


### Is the PowerKeeper enclosure suitable for outdoor installation in harsh site conditions?

Yes, PowerKeeper modules feature an enhanced sealed enclosure resistant to flooding, allowing installation at industrial and agricultural sites where the unit may be exposed to moisture, rain, or periodic ground flooding. This design reduces the need for additional canopies or protective enclosures, cutting installation time and cost.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/dd8ec9ce-1bf1-4a36-aacc-86e8095c6605-9ae5753d24e0.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Growatt ACE 261H-2H EU](https://comparepv.com/battery/growatt-ace-261h-2h-eu) | 248.1 kWh |  | 130.0 kW | HV | -1.5 kWh, +5.2 kW |
| [Growatt RISE 261H-5H](https://comparepv.com/battery/growatt-rise-261h-5h) | 247.95 kWh |  | 50.0 kW | HV | -1.7 kWh, -74.8 kW |
| [Growatt RISE 261H-4H](https://comparepv.com/battery/growatt-rise-261h-4h) | 247.95 kWh |  | 63.0 kW | HV | -1.7 kWh, -61.8 kW |
| [Growatt RISE 261H-3H](https://comparepv.com/battery/growatt-rise-261h-3h) | 247.95 kWh |  | 85.0 kW | HV | -1.7 kWh, -39.8 kW |
| [Growatt RISE 261H-2H](https://comparepv.com/battery/growatt-rise-261h-2h) | 247.95 kWh |  | 125.0 kW | HV | -1.7 kWh |
| [SolaX TRENE-P124B261L-E](https://comparepv.com/battery/solax-trene-p124b261l-e) | 247.95 kWh |  | 124.9 kW | HV | -1.7 kWh |
| [SolaX TRENE-P125B261L-E](https://comparepv.com/battery/solax-trene-p125b261l-e) | 247.95 kWh |  | 125.0 kW | HV | -1.7 kWh |
| [Fortress Power 50kW PCS / 245kWh (208VAC, 2P12S)](https://comparepv.com/battery/fortress-power-50kw-pcs-245kwh-208vac-2p12s) | 245 kWh |  | 50.0 kW | HV | -4.6 kWh, -74.8 kW |


---

Source: https://comparepv.com/battery/sungrow-st250cf

