---
title: "SRNE SR-SF02B-12 2.56 kWh Battery: Specs & Datasheet | ComparePV"
description: "SRNE SR-SF02B-12 2.56 kWh home battery. Specs: 1.5 kW continuous, 6000 cycles, 24.0 kg, 5 yrs warranty."
source: "https://comparepv.com/battery/srne-sr-sf02b-12"
updated: 2026-11-14
---

# SRNE SR-SF02B-12


## Identity

- **Manufacturer:** SRNE
- **Model:** SR-SF02B-12
- **Series:** SF Series
- **Usable energy:** 2.56 kWh
- **Voltage class:** Low voltage
- **Cell technology:** LFP


## How it compares

Compared against 190 batteries up to 6 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 0.60 | 0.88 | Typical | 107 |
| Cycle life | 6000 | 6000 | Typical | 30 |
| Weight per kWh | 9.4 | 10.7 | Strong - top 25% | 45 |
| Warranty | 5 yrs | 10 yrs | Weak - bottom 8% | 95 |


## Specification


### Capacity

- **Usable energy:** 2.56 kWh
- **Nominal energy:** 2.56 kWh
- **Max system capacity:** 81.9 kWh
- **Units in parallel:** 32


### Power

- **Continuous discharge power:** 1.53 kW
- **Continuous charge power:** 1.28 kW
- **Max discharge current:** 100 A
- **Max charge current:** 100 A
- **Peak discharge current:** 150 A


### Efficiency and lifetime

- **Cycle life:** 6000 cycles


### Cells and voltage

- **Voltage class:** Low voltage
- **Nominal voltage:** 12.8 V
- **Operating voltage:** 11 to 14 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 148 × 420 × 330 mm
- **Weight:** 24.0 kg
- **Enclosure:** IP30
- **Mounting:** wall
- **Cooling:** passive
- **Operating temperature:** -10 to 55 °C


### Compatibility

- **Protocols:** CAN, RS485, USB


### Warranty and certificates

- **Warranty:** 5 years
- **Certifications:** UN38.3, MSDS, IEC 62619:2022, EN IEC 61000-6


### Pros

- **Scalability up to 32 parallel modules** - The SF-Pro architecture allows connecting up to 32 48V battery units in a single parallel string, enabling capacity expansion from a few kWh to nearly 1,000 kWh without changing the controller or system topology. This is rarely matched in the modular residential ESS segment, where SRNE's own SE series, for example, caps out at 16 parallel units.
- **LFP chemistry with high cycle life** - LiFePO4 cells used across SRNE's storage lineup typically achieve ≥6,000 cycles at 80% DOD (0.5C, 25°C), equivalent to roughly 20 years of service at one cycle per day - a figure consistent with the manufacturer's EOS/EOH series and competitive with other Tier-1 LFP suppliers.
- **Simple installation and fast deployment** - Wall- or floor-mount options combined with a touchscreen LCD panel reduce installation and commissioning time on-site, an important advantage for installers running multiple projects per month and looking to cut labor costs.
- **Remote monitoring via WiFi/Bluetooth** - Built-in wireless connectivity and a mobile app give the owner real-time visibility into battery performance without extra communication modules, simplifying remote diagnostics and servicing for installers.
- **Built-in aerosol fire suppression** - An integrated aerosol fire-suppression system that actively responds to thermal events is a feature typically found in premium-tier storage units - many budget-segment products rely solely on BMS protection and circuit breakers for safety.


### Cons

- **Natural cooling limits commercial-scale use** - When scaling toward the upper end of the 32-module range (hundreds of kWh), passive cooling is less effective than the liquid cooling used in Tier-1 commercial competitors (e.g., BYD, CATL), which can constrain sustained output power in high-ambient-temperature environments.
- **Lower brand recognition than ESS market leaders** - Despite operating since 2009, SRNE has a smaller footprint and service network in Europe than global LFP storage leaders (BYD, Pylontech, Huawei), which may translate into longer warranty turnaround times or limited spare-parts availability in certain regions.


## About this series

The SF-Pro series is a modular 48V energy storage system built on lithium iron phosphate (LFP) cells, designed for flexible scaling of solar installations - from residential setups to larger commercial systems. Its key advantage is **scalability up to 32 modules connected in parallel**, allowing total capacity to grow from a few kilowatt-hours up to nearly a thousand without changing the system architecture - installers can start with a single unit and add more as energy demands increase. The series addresses the need for fast deployment: **simple wall or floor mounting** along with an intuitive touch LCD panel shorten commissioning time. Safety is ensured by an **aerosol fire suppression system** and natural cooling, reducing overheating risk over long-term operation. Users also gain full visibility into battery performance through **WiFi and Bluetooth connectivity** paired with a mobile app showing real-time data. Backed by a proven battery management system (BMS) and the long service life typical of LFP cells, the SF-Pro series suits installers and investors looking for an energy storage solution that combines straightforward setup with genuine room for future expansion.


## Questions


### What is the maximum energy storage capacity achievable with the SF-Pro series?

The SF-Pro series is built on a base module that can be connected in parallel up to 32 units within a single system architecture. This allows installed capacity to scale from several kilowatt-hours, typical for a single-family home, to nearly a thousand kilowatt-hours for commercial applications. An investor does not need to design for maximum power upfront - they can start with one module and add more as the PV installation grows.


### Does the SF-Pro energy storage system require air conditioning or special room ventilation?

No, SF-Pro modules use natural cooling, so they do not require active air conditioning or forced air circulation, reducing both installation and operating costs. The room should still have standard ventilation and a temperature within the BMS operating range. This design lowers the risk of LFP cell overheating during long-term, everyday use.


### How are SF-Pro modules mounted - wall-mounted or floor-standing?

The SF-Pro series is designed for fast deployment and supports both wall-mounted and floor-standing installation, depending on available space and the number of modules in the system. A simple mounting system and an intuitive LCD touch panel for configuration shorten commissioning time for installers. For larger commercial systems with multiple modules, floor-standing or cabinet mounting is typically preferred.


### Can the SF-Pro battery be monitored remotely via a mobile app?

Yes, SF-Pro modules include WiFi and Bluetooth connectivity, allowing real-time monitoring of operating parameters such as state of charge, voltage, and temperature through a mobile app. This feature is useful both for homeowners and installers, who can remotely diagnose system performance without a site visit.


### What fire safety protections does the SF-Pro series have?

SF-Pro battery safety is ensured by a built-in aerosol fire suppression system, which automatically activates if it detects a rise in temperature or smoke inside the module, limiting the risk of fire spreading. Combined with natural cooling and cell management through the BMS, this provides an additional layer of protection typical of professional-grade energy storage used in both residential and commercial installations.


### Is the SF-Pro series suitable for expanding an existing solar PV installation in the future?

Yes, this is one of the series' main advantages - a modular architecture that allows additional units to be connected in parallel without changing the system's design. An investor who started with a small home installation can later increase storage capacity as energy demand grows, for example after adding a heat pump or EV charger, without replacing the entire battery management system.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/SRNE_SF_series_28kWh_Solar_Storage_Battery_Datasheet_V00-f2e04a2e3309.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Victron Energy LFP-12,8/200](https://comparepv.com/battery/victron-energy-lfp-12-8-200) | 2.56 kWh | 92.0% | 2.6 kW | LV | +1.0 kW |
| [Victron Energy LFP-25,6/100](https://comparepv.com/battery/victron-energy-lfp-25-6-100) | 2.56 kWh | 92.0% | 2.6 kW | LV | +1.0 kW |
| [Victron Energy LFP-Smart 12,8/200](https://comparepv.com/battery/victron-energy-lfp-smart-12-8-200) | 2.56 kWh | 92.0% | 5.1 kW | LV | +3.6 kW |
| [Victron Energy LFP-Smart 25,6/100](https://comparepv.com/battery/victron-energy-lfp-smart-25-6-100) | 2.56 kWh | 92.0% | 5.1 kW | LV | +3.6 kW |
| [Deye RW-L2.5A](https://comparepv.com/battery/rw-l2-5a) | 2.56 kWh |  | 2.5 kW | LV | +1.0 kW |
| [Deye WD-G12200](https://comparepv.com/battery/wd-g12200) | 2.56 kWh |  | 2.5 kW | LV | +1.0 kW |
| [SRNE SR-EOS02B-12](https://comparepv.com/battery/srne-sr-eos02b-12) | 2.56 kWh |  |  | LV | Similar on paper |
| [SRNE SR-EOS02B-24](https://comparepv.com/battery/srne-sr-eos02b-24) | 2.56 kWh |  |  | LV | Similar on paper |


---

Source: https://comparepv.com/battery/srne-sr-sf02b-12

