---
title: "SolaX LD117 11.1 kWh Battery: Specs & Datasheet | ComparePV"
description: "SolaX LD117 11.1 kWh home battery. Specs: 12.8 kW continuous, 6000 cycles, 88.0 kg, 5 yrs warranty."
source: "https://comparepv.com/battery/solax-ld117"
updated: 2026-11-14
---

# SolaX LD117


## Identity

- **Manufacturer:** SolaX
- **Model:** LD117
- **Series:** TRIPLE Power LD
- **Usable energy:** 11.1 kWh
- **Voltage class:** Low voltage
- **Cell technology:** LFP


## How it compares

Compared against 210 batteries from 6 to 12 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 1.15 | 0.67 | Strong - top 6% | 10 |
| Cycle life | 6000 | 6000 | Typical | 37 |
| Weight per kWh | 7.9 | 12.1 | Strong - top 4% | 8 |
| Warranty | 5 yrs | 10 yrs | Weak - bottom 3% | 121 |


## Specification


### Capacity

- **Usable energy:** 11.1 kWh
- **Nominal energy:** 11.70 kWh
- **Depth of discharge:** 95 %
- **Max system capacity:** 177.6 kWh
- **Units in parallel:** 16


### Power

- **Continuous discharge power:** 12.80 kW
- **Continuous charge power:** 12.80 kW
- **Peak discharge power:** 23.50 kW
- **Max discharge current:** 230 A
- **Max charge current:** 230 A


### Efficiency and lifetime

- **Cycle life:** 6000 cycles
- **Capacity at end of life:** 70 %


### Cells and voltage

- **Voltage class:** Low voltage
- **Nominal voltage:** 51.2 V
- **Operating voltage:** 42 to 58 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 726 × 355 × 263 mm
- **Weight:** 88.0 kg
- **Enclosure:** IP40
- **Mounting:** wall
- **Cooling:** passive
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Protocols:** CAN2.0, RS485


### Warranty and certificates

- **Warranty:** 5 years
- **Certifications:** IEC 62619, CE, UN38.3


### Pros

- **High modular scalability** - The LD system supports up to 16 modules in parallel (e.g., LD5-S), scaling storage from roughly 5 kWh to nearly 90 kWh without replacing the existing installation - a flexibility rarely matched in the low-voltage residential ESS segment.
- **Safe LFP chemistry with Cell-to-Pack design** - LiFePO4 cells in a Cell-to-Pack architecture remove redundant mechanical components, increasing energy density versus conventional modular LFP packs and reducing overheating risk typical of older NMC chemistries.
- **Claimed cycle durability of >6,000 cycles** - For the LD51 series, the manufacturer states a lifespan above 6,000 cycles, placing it at the upper end of the residential-class LFP storage segment and translating into a favorable LCOE for stored energy over a 10-year horizon.
- **Remote diagnostics and OTA updates** - Built-in remote monitoring and firmware update capabilities let installers service the system without a site visit, cutting service costs compared to older storage generations lacking remote connectivity.
- **Stable market presence since 2019** - The series has been in continuous production since 2019, and as a Tier-1 manufacturer (SolaX, founded 2012), this provides confidence in spare-part availability and compatibility with newer hybrid inverters from the same brand.


### Cons

- **Lower voltage limits charge current** - As a low-voltage system (nominally ~51.2 V for LD5), the series requires higher charge/discharge currents (up to 100-135 A) than high-voltage systems of comparable capacity, increasing cable losses and requiring thicker DC wiring on longer installation runs.
- **Inconsistent warranty terms across markets** - Warranty duration for the Triple Power/LD family varies significantly by market and variant (from roughly 5 years in older models to 10-12 years in newer ones), making a straightforward TCO comparison difficult without checking the local warranty card with the distributor.


## About this series

The **SolaX TRIPLE Power LD** series is a low-voltage energy storage system built for flexible expansion of residential installations as household energy needs grow over time. By connecting multiple modules in parallel, users can scale capacity from a single unit up to a system with significantly greater stored energy, without having to replace the entire setup. The **LFP (LiFePO4) cell technology** used delivers a high level of chemical safety and stable performance even under demanding thermal conditions. A key differentiator of the series is its **Cell-to-Pack (CTP) construction**, which removes unnecessary intermediate components and increases energy density within a limited installation footprint - valuable when retrofitting existing boiler rooms or garages. The storage system offers **smart management and remote diagnostics**, making it easier for installers to service units and push firmware updates without an on-site visit. An intuitive LCD touchscreen gives end users quick insight into operating status without needing a separate app. The LD series suits both prosumer installations focused on self-consumption and projects that demand strong cycle durability and predictable long-term operating costs, translating into a favorable LCOE for stored energy.


## Questions


### Can the SolaX TRIPLE Power LD battery be expanded if I need more storage capacity in the future?

Yes, this is the main advantage of this series. TRIPLE Power LD modules are connected in parallel, so you can start with a single unit and add more over time to increase storage capacity without replacing the entire system. This approach lets you match the investment cost to your current energy needs, and installers can expand the system without dismantling the existing setup.


### Is the LFP battery in the SolaX TRIPLE Power LD safe to install in a garage or boiler room?

LiFePO4 (LFP) cells used in this series offer high chemical stability and a lower risk of thermal runaway compared to other lithium chemistries, making them a solid choice for utility rooms. They remain stable even under more demanding thermal conditions, though as with any ESS, installation should follow the manufacturer's manual and local safety regulations.


### What is Cell-to-Pack (CTP) construction in the SolaX TRIPLE Power LD, and does it affect the unit's size?

Cell-to-Pack integrates the cells directly into the pack housing without intermediate modules. This results in higher energy density within a smaller footprint, which matters when retrofitting existing boiler rooms or garages that lack space for bulky equipment. In practice, this means more stored energy per square meter of installation space.


### Can an installer remotely diagnose a fault in the LD battery without visiting the customer's home?

Yes, the SolaX TRIPLE Power LD includes remote management and diagnostic features that let installers monitor system performance and push firmware updates remotely. This reduces the number of service visits and shortens response time to issues, while the end user can check the operating status anytime on the built-in LCD screen without needing a separate app.


### Is TRIPLE Power LD a low-voltage system, and does that matter when choosing an inverter?

Yes, it is a low-voltage ESS, so it's important to confirm voltage compatibility and the communication protocol with your installer before selecting a hybrid inverter. Low-voltage architecture tends to be simpler to service and safer to handle than high-voltage systems, which can be relevant for home installations set up in tight spaces.


### Is TRIPLE Power LD suitable for an installation focused on maximizing self-consumption?

Yes, the LD series was designed specifically for prosumers aiming to maximize self-consumption from their solar PV system. The high cycle durability of the LFP cells combined with a predictable long-term operating cost translates into a favorable LCOE for the stored energy, making this series a sound choice for anyone planning long-term use of the battery.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/solax-ld117-datasheet-en-d22327b1b8b9.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [FelicityESS LUX-E-48230LG03](https://comparepv.com/battery/felicityess-lux-e-48230lg03) | 11.21 kWh |  |  | LV | +0.1 kWh |
| [Power Battery Premium x5](https://comparepv.com/battery/rct-power-power-battery-premium-x5) | 11.25 kWh |  | 10.0 kW | LV | +0.2 kWh, -2.8 kW |
| [EG4 Electronics WP-16/280-1AWLL](https://comparepv.com/battery/eg4-electronics-wp-16-280-1awll) | 11.44 kWh |  |  | LV | +0.3 kWh |
| [EG4 Electronics WM-48-280-LL-00](https://comparepv.com/battery/eg4-electronics-wm-48-280-ll-00) | 11.44 kWh |  | 7.2 kW | LV | +0.3 kWh, -5.6 kW |
| [Fortress Power 10.8P2](https://comparepv.com/battery/fortress-power-10-8p2) | 10.75 kWh | 98.0% | 10.2 kW | LV | -0.3 kWh, -2.6 kW |
| [WeCo 5K3-XP LV x2](https://comparepv.com/battery/weco-5k3-xp-lv-x2) | 10.74 kWh |  |  | LV | -0.4 kWh |
| [SolaX T-BAT LR12.5](https://comparepv.com/battery/solax-t-bat-lr12-5) | 11.5 kWh |  |  | LV | +0.4 kWh |
| [Sunsynk SUN-BATT-10.65](https://comparepv.com/battery/sunsynk-sun-batt-10-65) | 10.65 kWh |  | 10.2 kW | LV | -0.4 kWh, -2.6 kW |


---

Source: https://comparepv.com/battery/solax-ld117

