---
title: "Sigenergy SigenStack x4 48.24 kWh Battery: Specs & Datasheet | ComparePV"
description: "Sigenergy SigenStack x4 48.24 kWh home battery. Specs: 10000 cycles, 500.0 kg."
source: "https://comparepv.com/battery/sigenergy-sigenstack-x4"
updated: 2026-11-14
---

# Sigenergy SigenStack x4


## Identity

- **Manufacturer:** Sigenergy
- **Model:** SigenStack x4
- **Series:** SigenStack
- **Usable energy:** 48.24 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP


## How it compares

Compared against 305 batteries from 20 to 50 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | - | 0.55 |  |  |
| Cycle life | 10000 | 6000 | Strong - top 9% | 10 |
| Weight per kWh | 10.4 | 10.1 | Typical | 133 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 48.24 kWh
- **Nominal energy:** 48.24 kWh
- **Module energy:** 12.06 kWh
- **Modules per stack:** 4 to 21
- **Max system capacity:** 253.3 kWh


### Efficiency and lifetime

- **Cycle life:** 10000 cycles
- **Capacity at end of life:** 60 %


### Cells and voltage

- **Voltage class:** High voltage
- **Operating voltage:** 550 to 1100 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Active balancing, Thermal management


### Physical

- **Dimensions:** 1643 × 770 × 363 mm
- **Weight:** 500.0 kg
- **Enclosure:** IP66
- **Mounting:** floor
- **Cooling:** active-air
- **Noise:** 65 dB
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Compatible inverters:** Sigen C&I Hybrid Inverter Series
- **Protocols:** CAN


### Warranty and certificates

- **Certifications:** IEC/EN 60730-1, UN 38.3, IEC/EN 62619, IEC/EN 63056, IEC/EN 62040, UL9540A


### Pros

- **Scalable stack architecture** - Each SigenStack BAT 12.0 module holds roughly 12.06 kWh and modules can be combined into stacks of 4 to 21 units, enabling single stacks above 250 kWh that can further be paralleled for utility-scale projects without replacing existing infrastructure.
- **Safer LiFePO4 chemistry** - LFP cells offer higher thermal stability and lower thermal runaway risk than NMC cells, which translates into longer service life and safer operation under the daily deep-cycling typical of C&I applications.
- **IP66 outdoor durability** - The IP66-rated enclosure and -20°C to 55°C operating range allow outdoor installation even in harsh climates, removing the need for an additional climate-controlled enclosure or canopy.
- **Full integration with the Sigen ecosystem** - The system is natively paired with Sigen hybrid inverters (Sigen Energy Controller), delivering a complete ESS solution capable of grid-tied and off-grid operation without integrating components from multiple vendors.
- **Low operating noise** - Lower acoustic emissions compared to systems relying on high-speed fans make SigenStack well suited for urban sites and facilities near residential buildings requiring quiet operation.


### Cons

- **Short manufacturer track record** - Sigenergy was founded in 2022 and SigenStack launched in 2024 - compared to Tier-1 C&I storage makers like CATL, BYD, or Huawei with 10+ years of field deployment, there is still limited long-term field data on degradation and durability under industrial duty cycles.
- **No standardized public pricing** - SigenStack C&I pricing is quoted per project by local distributors rather than published as a fixed per-kWh cost, making it harder for buyers to directly benchmark against competitors with transparent pricing (European C&I storage currently runs roughly EUR 190-210/kWh).


## About this series

The **SigenStack** series is a modular, commercial and industrial (C&I) energy storage system engineered to scale from standalone business installations up to large, megawatt-class deployments. Each battery module is built around **LiFePO4** cells, delivering strong thermal stability, operational safety, and long cycle life even under intensive, daily duty cycles. The series' key advantage is its **stackable architecture** - modules are combined into vertical stacks and then connected in parallel to form larger systems, allowing capacity to be flexibly matched to a growing business's energy needs without replacing the entire infrastructure. SigenStack pairs with Sigen hybrid inverters to form a complete, integrated ESS solution ready for both grid-tied and off-grid operation. An **IP66**-rated enclosure combined with active cooling enables installation both indoors and outdoors, even in demanding environmental conditions. Low operating noise makes the system well suited for urban sites and facilities that require quiet operation. SigenStack targets commercial and industrial investors, as well as energy storage farm operators, looking for a **scalable and future-proof** solution that can be expanded in stages alongside the growth of their photovoltaic installation.


## Questions


### What is the capacity of a single SigenStack module and how much energy can a full stack provide?

The base SigenStack battery module (BAT 12.0) has a capacity of around 12 kWh. Modules are combined into vertical stacks of 4 to 21 units, giving systems ranging from roughly 48 kWh up to over 250 kWh in a single cabinet. The stackable architecture lets installers size the system to current needs and expand it later as demand grows.


### Can SigenStack be installed outdoors?

Yes, the SigenStack enclosure is rated IP66, meaning full protection against dust and powerful water jets. Combined with active cooling, the system can be installed both indoors and outdoors, including in harsh weather conditions, without additional protective housing.


### What warranty does SigenStack carry, and how durable are the LiFePO4 cells?

Sigenergy provides a standard 10-year warranty on SigenStack battery modules. The LiFePO4 (LFP) cells offer high thermal stability and strong resistance to degradation, supporting intensive daily cycling (daily charge and discharge) without significant capacity loss over the warranty period.


### How does SigenStack's stackable architecture differ from conventional energy storage systems?

Conventional storage systems come with a fixed capacity defined by the chosen model, and increasing it typically means replacing the entire unit. SigenStack is built from modules combined into vertical stacks, which are then paralleled into larger systems. This lets a company start with a smaller installation and scale it in stages as energy demand grows, without replacing existing infrastructure.


### Is SigenStack suitable for urban locations in terms of noise levels?

Yes, SigenStack is engineered for low noise emission, making it a strong fit for commercial sites in city centers, office buildings, and locations near residential areas where quiet operation of outdoor equipment is required.


### Which inverters does SigenStack work with, and does it support off-grid operation?

SigenStack is designed to pair with Sigenergy's hybrid inverters, forming a fully integrated ESS solution. This combination supports both on-grid and off-grid (island mode) operation, allowing businesses to keep critical loads powered during a grid outage.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/1780567984715_60997ce8-d1bc-4e6a-a4c5-705a217207c8-123ae67923ff.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Luxpower C16 3S](https://comparepv.com/battery/luxpower-c16-3s) | 48.23 kWh |  |  | HV | Similar on paper |
| [Deye BOS-A (7 modules in series)](https://comparepv.com/battery/bos-a-7-modules-in-series) | 48.38 kWh |  |  | HV | +0.1 kWh |
| [TESVOLT TS HV 50/6-20](https://comparepv.com/battery/tesvolt-ts-hv-50-6-20) | 48 kWh | 98.0% | 48.6 kW | HV | -0.2 kWh |
| [FoxESS CQ6-L9](https://comparepv.com/battery/foxess-cq6-l9) | 48.52 kWh | 95.0% | 51.8 kW | HV | +0.3 kWh |
| [SMA Storage M 49.1](https://comparepv.com/battery/sma-solar-sma-storage-m-49-1) | 49.12 kWh | 93.5% |  | HV | +0.9 kWh |
| [Sungrow ST050CF](https://comparepv.com/battery/sungrow-st050cf) | 49.9 kWh |  | 25.0 kW | HV | +1.7 kWh |
| [GoodWe GW51.2-BAT-I-G10](https://comparepv.com/battery/goodwe-gw51-2-bat-i-g10) | 50 kWh | 96.0% | 56.3 kW | HV | +1.8 kWh |
| [TESVOLT TAYTAN/08-40](https://comparepv.com/battery/tesvolt-taytan-08-40) | 50 kWh |  | 50.0 kW | HV | +1.8 kWh |


---

Source: https://comparepv.com/battery/sigenergy-sigenstack-x4

