---
title: "SENEC.Home P4 (3 battery modules) 10.65 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "SENEC.Home P4 (3 battery modules) 10.65 kWh all-in-one home battery. Specs: 10.0 kW continuous, 10 yrs warranty."
source: "https://comparepv.com/battery/senec-senec-home-p4-3-battery-modules"
updated: 2026-11-14
---

# SENEC.Home P4 (3 battery modules)


## Identity

- **Manufacturer:** SENEC
- **Model:** SENEC.Home P4 (3 battery modules)
- **Series:** SENEC.Home P4
- **Usable energy:** 10.65 kWh
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 210 batteries from 6 to 12 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 0.94 | 0.67 | Typical | 46 |
| Cycle life | - | 6000 |  |  |
| Weight per kWh | - | 12.1 |  |  |
| Warranty | 10 yrs | 10 yrs | Typical | 13 |


## Specification


### Capacity

- **Usable energy:** 10.65 kWh
- **Modules per stack:** 2 to 5


### Power

- **Continuous discharge power:** 10.02 kW
- **Continuous charge power:** 10.02 kW


### Cells and voltage

- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Built-in inverter

- **Inverter power:** 11.8 kW
- **Phases:** Three-phase
- **MPPT trackers:** 3
- **Backup power:** 11.8 kW


### Physical

- **Dimensions:** 1120 × 750 × 450 mm
- **Enclosure:** IP54
- **Mounting:** floor
- **Cooling:** active-air
- **Operating temperature:** -20 to 50 °C


### Compatibility

- **Protocols:** Ethernet, RS485, SG Ready, USB, Ripple control receiver


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** CE, IEC 62619:2022, UN 38.3, EN 62109-1:2010, EN 62109-2:2011, EN IEC 62477-1:2022, EN 61010-1:2010, EN IEC 61000-6-1:2019, EN IEC 61000-6-3:2021, EN IEC 63000:2018, VDE-AR-N 4105:2018, VDE-AR-E 2510-2:2021, VDE-AR-E 2510-50:2017


### Pros

- **Modular scalability 7.1-17.75 kWh** - The P4 system offers usable capacity from 7.1 kWh (2 modules) up to 17.75 kWh (5 modules) in roughly 3.55 kWh increments, allowing the storage to be sized to current needs and expanded later without replacing the whole installation.
- **LFP cells instead of NMC** - Lithium iron phosphate chemistry provides higher thermal stability and better resistance to deep discharge cycles compared to older NMC-based storage, reducing degradation and overheating risk in residential use.
- **SENEC.Cloud integration** - The platform manages real-time energy flow between PV, battery, the home, and an EV charger to maximize self-consumption - a feature less commonly offered by smaller, local ESS manufacturers.
- **10-year warranty with extension option** - The standard 10-year manufacturer warranty can be extended under the SENEC.Care program, matching tier-1 segment standards and giving long-term investors greater flexibility.


### Cons

- **Backup power is optional only** - Emergency power supply requires an additional SENEC.Backup P4 module and is not built in by default - unlike some competing ESS systems where UPS-like backup functionality is part of the base configuration.
- **Next-generation SENEC storage announced** - At EES Europe 2026, the manufacturer unveiled a new home storage generation (9, 13.5, and 18 kWh), which may signal a gradual phase-out of the P4 series in the longer term - buyers should confirm current product status with SENEC before purchasing.


## About this series

The SENEC.Home P4 is a modular energy storage system built to grow alongside the needs of a residential solar installation. Thanks to its independent battery module design, the system offers **scalable capacity** that can be sized at installation time or expanded later without replacing the entire unit. At the core of the series are cells built on **LFP (lithium iron phosphate)** chemistry, valued for chemical stability, resilience to deep cycling, and low overheating risk, which translates into safe operation even in residential living spaces. The P4 integrates with the **SENEC.Cloud** platform, which intelligently manages energy flow between the PV system, battery, household, and optionally an EV charger, maximizing self-consumption of solar power. For households that depend on uninterrupted power supply, an optional **backup power function** is available through pairing with the SENEC.Backup P4 module. The manufacturer backs the unit with a **10-year warranty**, extendable through the SENEC.Care program. This makes it a solution geared toward investors seeking a flexible, safe, and future-proof energy storage system for new photovoltaic installations.


## Questions


### What is the capacity of the SENEC.Home P4 battery storage system, and can it be expanded?

The SENEC.Home P4 is modular - capacity depends on the number of installed battery modules (2 to 5), giving usable capacity from roughly 7.1 kWh to about 17.8 kWh. Additional modules can be added later without replacing the entire system, which is useful if household energy demand grows, for example after adding an EV charger.


### Why does the SENEC.Home P4 use LFP cells instead of another lithium chemistry?

LFP (lithium iron phosphate) cells offer high thermal stability and a low risk of overheating or fire compared to other lithium chemistries, which matters when the unit is installed inside living spaces. LFP also handles deep, frequent charge cycles well, contributing to a longer service life under daily PV self-consumption use.


### What warranty comes with the SENEC.Home P4, and can it be extended?

The manufacturer provides a standard 10-year warranty on the SENEC.Home P4. Through the SENEC.Care program, owners can purchase an extended warranty for additional years, but activation typically must be requested within a few months of commissioning - so it's worth arranging right after installation rather than later.


### Does the SENEC.Home P4 provide emergency backup power during a blackout?

The P4 unit on its own does not provide automatic backup power, but it can be paired with the dedicated SENEC.Backup P4 module to keep selected circuits in the home running during a grid outage. This is worth considering in areas with frequent power interruptions or in homes with critical loads such as a heat pump.


### How does SENEC.Cloud improve the day-to-day efficiency of the P4 battery?

SENEC.Cloud continuously analyzes solar production, household consumption, and the battery's state of charge to decide when to charge the storage, when to export surplus to the grid, and when to prioritize an EV charger. This increases self-consumption of solar energy, which directly reduces reliance on grid electricity and lowers bills.


### How does the SENEC.Home P4 differ from earlier SENEC series like V3 or E4?

The main difference is the P4's modular design, which lets capacity be tailored to a specific installation and expanded later, something earlier series offered to a much lesser degree. The P4 also uses a newer generation of LFP cells and deeper integration with the SENEC.Cloud platform and optional backup module, making it a more versatile choice for new PV installations.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/TD220-09611_en-DEU_SENECHome_P4_Technical_data_sheet-1f6567cfa2b4.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [E3/DC S10 Xplus 11](https://comparepv.com/battery/e3-dc-s10-xplus-11) | 11.2 kWh | 95.0% | 6.0 kW |  | +0.5 kWh, -4.0 kW |
| [E3/DC S10 Xplus COMPACT 11](https://comparepv.com/battery/e3-dc-s10-xplus-compact-11) | 11.2 kWh | 95.0% | 6.0 kW |  | +0.5 kWh, -4.0 kW |
| [E3/DC S10 Xflex 11](https://comparepv.com/battery/e3-dc-s10-xflex-11) | 11.2 kWh |  | 12.5 kW |  | +0.5 kWh, +2.5 kW |
| [E3/DC COMPACT S10 X 14](https://comparepv.com/battery/e3-dc-compact-s10-x-14) | 11.2 kWh |  | 6.0 kW |  | +0.5 kWh, -4.0 kW |
| [sonnenBatterie hybrid 9.53/12.5](https://comparepv.com/battery/sonnen-sonnenbatterie-hybrid-9-53-12-5) | 11.25 kWh | 98.0% | 3.3 kW |  | +0.6 kWh, -6.7 kW |
| [SENEC.Home V3 hybrid 10.0](https://comparepv.com/battery/senec-senec-home-v3-hybrid-10-0) | 10 kWh | 97.4% | 3.8 kW |  | -0.7 kWh, -6.3 kW |
| [Growatt APX 10.0M-S3](https://comparepv.com/battery/growatt-apx-10-0m-s3) | 10 kWh |  | 5.0 kW |  | -0.7 kWh, -5.0 kW |
| [sonnenBatterie 10/11](https://comparepv.com/battery/sonnen-sonnenbatterie-10-11) | 10 kWh |  | 4.6 kW |  | -0.7 kWh, -5.4 kW |


---

Source: https://comparepv.com/battery/senec-senec-home-p4-3-battery-modules

