---
title: "SENEC E4HT08-02 9.2 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "SENEC E4HT08-02 9.2 kWh all-in-one home battery. Specs: 5.1 kW continuous, 177.0 kg, 10 yrs warranty."
source: "https://comparepv.com/battery/senec-e4ht08-02"
updated: 2026-11-14
---

# SENEC E4HT08-02


## Identity

- **Manufacturer:** SENEC
- **Model:** E4HT08-02
- **Series:** SENEC.Home E4
- **Usable energy:** 9.2 kWh
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 210 batteries from 6 to 12 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 0.56 | 0.67 | Typical | 103 |
| Cycle life | - | 6000 |  |  |
| Weight per kWh | 19.2 | 12.1 | Weak - bottom 4% | 170 |
| Warranty | 10 yrs | 10 yrs | Typical | 13 |


## Specification


### Capacity

- **Usable energy:** 9.2 kWh
- **Module energy:** 4.60 kWh
- **Modules per stack:** 2
- **Max system capacity:** 9.2 kWh


### Power

- **Continuous discharge power:** 5.12 kW
- **Continuous charge power:** 5.12 kW


### Cells and voltage

- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Thermal management


### Built-in inverter

- **Inverter power:** 8.0 kW
- **Phases:** Three-phase
- **MPPT trackers:** 2
- **Backup power:** 8.0 kW


### Physical

- **Dimensions:** 1340 × 800 × 160 mm
- **Weight:** 177.0 kg
- **Enclosure:** IP65
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Cooling:** active-air
- **Operating temperature:** -20 to 45 °C


### Compatibility

- **Protocols:** Ethernet, SG ready, RS-485, ModbusTCP


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** CE, EN 62109-1:2010, EN 62109-2:2011, IEC 62477-1:2022, EN IEC 62040-1:2017, IEC 60529:1989/AMD2:2013/COR1:2019, EN IEC 61000-6-1:2016, EN IEC 61000-6-3:2020, EN IEC 63000:2018, VDE-AR-E 2510-2:2021, VDE-AR-E 2510-50:2017, VDE-AR-N 4105:2018, VDE FNN Guideline, IEC 62619:2022, UN 38.3, EN ISO 13849-1:2023


### Pros

- **Simple retrofit without PV inverter swap** - The AC-coupled architecture allows the SENEC.Home E4 to be added to an existing PV installation with any inverter, without replacing it. This meaningfully cuts installation time and labor cost compared to hybrid systems requiring DC-side rework.
- **Safe LFP (LiFePO4) chemistry** - LiFePO4 cells offer higher thermal stability and better tolerance of deep, daily charge cycles than older NMC chemistries, translating into longer practical battery life under typical residential usage.
- **IP65 outdoor-rated enclosure** - The IP65 protection class allows outdoor installation (e.g., on a facade or in a garden structure), freeing up garage or utility-room space - a feature less common among all-in-one AC-coupled units in this class.
- **Extended warranty up to 20 years** - SENEC offers a standard 10-year manufacturer's warranty with an option to extend by another 10 years of hardware protection, totaling up to 20 years - above the typical 10-year industry standard for home batteries.
- **All-in-one design shortens commissioning** - The battery inverter, battery cells, and energy management system (EMS) are integrated into a single enclosure, meaning installers connect one unit instead of several components, reducing wiring and on-site setup time.


### Cons

- **Limited single-unit capacity** - Maximum usable capacity in the two-module configuration is 9.2 kWh (2x 4.6 kWh), lower than some competitors offering 15-20 kWh in a single unit. Higher-demand households may need to stack additional units.
- **No published round-trip efficiency figure** - SENEC does not publish a round-trip efficiency value in its official machine-readable datasheets, limiting direct comparison against competitors that publish verified figures in the 94-96% range.
- **Double-conversion losses inherent to AC-coupling** - In an AC-coupled architecture, energy undergoes DC-AC-DC-AC conversion during charge and discharge, which inherently introduces greater losses than DC-coupled hybrid systems, particularly under high daytime self-consumption.


## About this series

The SENEC.Home E4 is a modular, **AC-coupled** energy storage system designed to make retrofitting an existing solar PV installation simple, without replacing the existing PV inverter. Thanks to its **all-in-one** architecture, combining the battery inverter, storage, and energy management system in a single enclosure, installation and commissioning come down to connecting one unit, significantly cutting installer labor time. The series relies on safe **LFP (LiFePO4)** chemistry, resistant to degradation and built for frequent, deep daily cycling, while its **modular capacity design** lets the storage be sized to the household's actual demand instead of oversizing the system. The **IP65**-rated enclosure allows outdoor mounting, freeing up space in the garage or utility room. Smart energy management automatically prioritizes self-consumption of solar power, with communication handled through the dedicated SENEC.PowerBase interface, integrated into the SENEC.Cockpit platform. An optional SENEC.Backup E4 module provides power continuity during grid outages. This solution targets single-family homeowners looking for a simple, flexible, and visually unobtrusive upgrade to an existing PV system, without needing to overhaul the entire setup.


## Questions


### Does the SENEC.Home E4 require replacing the existing PV inverter?

No. The SENEC.Home E4 is an AC-coupled battery storage system, meaning it connects on the AC side independently of the existing PV inverter. This allows homeowners to add storage to an already operating solar installation without removing or replacing the inverter, significantly shortening installation time and reducing retrofit costs.


### What capacity options are available for the SENEC.Home E4 battery storage?

The SENEC.Home E4 uses a modular capacity design, allowing it to be scaled to household needs. Depending on the number of battery modules installed, usable capacity configurations range from roughly 4.6 kWh up to 13.8 kWh. This avoids oversizing the system and paying for capacity that would otherwise go unused.


### What warranty does SENEC offer on the Home E4 storage system?

SENEC provides a 10-year manufacturer's warranty on the Home E4, covering both the battery modules and the integrated hybrid inverter. This is a standard warranty length for LFP-based storage systems, which are known for low capacity degradation under daily deep-cycle use.


### Can the SENEC.Home E4 be installed outdoors?

Yes. The unit's enclosure has an IP65 protection rating, giving it full protection against dust and water jets. This allows outdoor installation on an exterior wall of the house or garage, freeing up space in the boiler room or utility area, which is especially valuable in smaller single-family homes.


### Does the SENEC.Home E4 provide backup power during a grid outage?

Backup power is not built into the base unit; it requires the optional SENEC.Backup E4 module. Once added, the system automatically switches the household to battery power when the grid fails, ensuring continuous supply to critical loads during an outage.


### How is the SENEC.Home E4 monitored and managed?

Communication runs through the dedicated SENEC.PowerBase interface, integrated with the SENEC.Cockpit platform available online and via mobile app. The system automatically prioritizes self-consumption of solar energy, letting users track production, consumption, and battery state of charge in real time without extra hardware.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/TD220-09710_en-DEU_SENECHome_E4_3ph_Technical_data_sheet-76b27e675780.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [sonnenBatterie hybrid 9.53/10](https://comparepv.com/battery/sonnen-sonnenbatterie-hybrid-9-53-10) | 9 kWh | 98.0% | 3.3 kW |  | -0.2 kWh, -1.8 kW |
| [Sigenergy SigenStor BAT 10.0](https://comparepv.com/battery/sigenergy-sigenstor-bat-10-0) | 8.76 kWh |  | 4.6 kW |  | -0.4 kWh, -0.5 kW |
| [E3/DC one c 9](https://comparepv.com/battery/e3-dc-one-c-9) | 8.7 kWh |  | 9.0 kW |  | -0.5 kWh, +3.9 kW |
| [SENEC.Home V3 hybrid 10.0](https://comparepv.com/battery/senec-senec-home-v3-hybrid-10-0) | 10 kWh | 97.4% | 3.8 kW |  | +0.8 kWh, -1.4 kW |
| [Growatt APX 10.0M-S3](https://comparepv.com/battery/growatt-apx-10-0m-s3) | 10 kWh |  | 5.0 kW |  | +0.8 kWh |
| [sonnenBatterie 10/11](https://comparepv.com/battery/sonnen-sonnenbatterie-10-11) | 10 kWh |  | 4.6 kW |  | +0.8 kWh, -0.5 kW |
| [sonnenBatterie 10 performance+/11](https://comparepv.com/battery/sonnen-sonnenbatterie-10-performanceplus-11) | 10 kWh |  | 5.0 kW |  | +0.8 kWh |
| [E3/DC COMPACT S10 X 10](https://comparepv.com/battery/e3-dc-compact-s10-x-10) | 8.25 kWh |  | 4.5 kW |  | -0.9 kWh, -0.6 kW |


---

Source: https://comparepv.com/battery/senec-e4ht08-02

