---
title: "SAJ EK60 B3-16.0-LV 15.2 kWh Battery: Specs & Datasheet | ComparePV"
description: "SAJ EK60 B3-16.0-LV 15.2 kWh home battery. Specs: 10.0 kW continuous, 8000 cycles, 110.0 kg, 10 yrs warranty."
source: "https://comparepv.com/battery/saj-ek60-b3-16-0-lv"
updated: 2026-11-14
---

# SAJ EK60 B3-16.0-LV


## Identity

- **Manufacturer:** SAJ
- **Model:** EK60 B3-16.0-LV
- **Series:** EK60 B3
- **Usable energy:** 15.2 kWh
- **Voltage class:** Low voltage
- **Cell technology:** LFP


## How it compares

Compared against 266 batteries from 12 to 20 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 0.66 | 0.62 | Typical | 84 |
| Cycle life | 8000 | 6000 | Strong - top 22% | 15 |
| Weight per kWh | 7.2 | 10.9 | Strong - top 4% | 10 |
| Warranty | 10 yrs | 10 yrs | Typical | 19 |


## Specification


### Capacity

- **Usable energy:** 15.2 kWh
- **Nominal energy:** 16.00 kWh
- **Depth of discharge:** 95 %
- **Module energy:** 16.00 kWh
- **Modules per stack:** 1 to 16
- **Max system capacity:** 256.0 kWh
- **Units in parallel:** 16


### Power

- **Continuous discharge power:** 10.00 kW
- **Continuous charge power:** 8.00 kW
- **Max discharge current:** 200 A
- **Max charge current:** 157 A
- **Peak discharge current:** 300 A


### Efficiency and lifetime

- **Cycle life:** 8000 cycles


### Cells and voltage

- **Voltage class:** Low voltage
- **Nominal voltage:** 51.2 V
- **Operating voltage:** 45 to 58 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 790 × 430 × 224 mm
- **Weight:** 110.0 kg
- **Enclosure:** IP65
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Cooling:** passive
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Compatible inverters:** SAJ storage inverters
- **Protocols:** CAN


### Warranty and certificates

- **Warranty:** 10 years
- **Warranted cycles:** 8000 cycles
- **Certifications:** IEC 62619, IEC62040, IEC61000, UN38.3


### Pros

- **Scalable up to 256 kWh** - A single EK60 B3 unit delivers 16 kWh, and the system supports up to 16 units in parallel for a maximum of 256 kWh. This is among the higher scaling limits in the low-voltage residential ESS segment, allowing migration from a single-family install to a larger prosumer site on the same platform.
- **High recommended DOD of 95%** - With 16 kWh rated energy and a recommended DOD of 95% (roughly 15.2 kWh usable per commercial spec sheets), users realistically access most of the stated capacity, unlike storage units that cap DOD at 80-90%.
- **IP65 enclosure for indoor and outdoor mounting** - The IP65-rated enclosure allows outdoor installation without an extra cabinet or canopy, relieving pressure on limited indoor technical space and giving installers more flexibility in placement.
- **Built-in fire-protection module (LFP chemistry)** - LiFePO4 chemistry with enhanced safety characteristics, combined with a dedicated fire-protection module, reduces the risk of thermal instability and extends cell life under long-term daily cycling.
- **Plug-and-play integration with the SAJ ecosystem** - Plug-and-play compatibility with SAJ storage inverters, plus support for remote monitoring and firmware updates, shortens commissioning time and enables remote servicing without on-site technician visits.


### Cons

- **Low-voltage architecture (51.2 V)** - The EK60 B3 operates on a low-voltage 51.2 V/314 Ah architecture, which at the maximum 256 kWh configuration requires higher currents and thicker DC cabling than high-voltage (HV) competitor systems, increasing installation cost and cable losses at large configurations.
- **No publicly stated cycle-life figure** - Available commercial documentation for the EK60 B3 does not list an officially confirmed cycle-life rating from SAJ, whereas other series from the manufacturer (e.g. EK70, EK90) explicitly state 10,000-12,000 cycles in their warranty documents. This gap makes direct longevity comparison with tier-1 competitors harder.


## About this series

The EK60 B3 series is a line of low-voltage LiFePO4 energy storage batteries built for households that need high capacity in a compact, modular design. A single unit delivers 16 kWh, and the system can be expanded to up to 16 batteries connected in parallel, reaching a total of 256 kWh - a scalable solution that grows alongside the needs of the installation, from a single-family home to larger prosumer setups. What sets this series apart is its **high usable capacity at a recommended DOD of 95%**, meaning real-world energy utilization rather than theoretical rated values. The batteries feature a **built-in fire protection module** based on enhanced-safety LFP technology, which minimizes overheating risk and extends cell longevity over the long term. An **IP65 protection rating** enclosure allows for flexible mounting both indoors and outdoors, giving installers greater freedom when technical space is limited. Thanks to **plug and play compatibility with SAJ storage inverters** along with remote monitoring and firmware upgrade support, system configuration is fast and maintenance is simplified. The EK60 B3 is the right choice wherever safety, installation flexibility, and future storage expansion matter most.


## Questions


### How many kWh does one EK60 B3 battery have and can the system be expanded later?

A single EK60 B3 unit has a capacity of 16 kWh. The system is modular and supports parallel connection of up to 16 batteries, reaching a total of up to 256 kWh. This means an installation can start with a single unit and be scaled up as energy demand grows, without replacing the entire system.


### What does 95% DOD mean for the EK60 B3 storage, and is that a lot compared to other batteries?

DOD (Depth of Discharge) of 95% means that out of the rated 16 kWh capacity, almost all of it can actually be used. This is higher than many competing storage systems, which often limit usable capacity to 80-90%, resulting in more real-world available energy each day without accelerating cell degradation.


### Can the EK60 B3 battery be installed outdoors?

Yes, the EK60 B3 enclosure has an IP65 protection rating, meaning it is fully dust-tight and resistant to water jets. The battery can be installed in a garage, boiler room, or outdoors, for example on an exterior wall. This gives installers more flexibility in choosing a location, especially when indoor technical space is limited.


### Is the EK60 B3 fire-safe, given that it's a lithium battery?

The EK60 B3 cells are based on LiFePO4 (LFP) chemistry, which is inherently more thermally stable than other lithium chemistries. In addition, the battery includes a built-in fire protection module that minimizes overheating risk and limits the consequences of a potential cell failure. This combination increases safety for residential installations, especially indoors.


### Which inverters is the EK60 B3 storage compatible with?

The EK60 B3 is designed with a plug-and-play architecture for use with SAJ storage inverters. This means system setup is reduced to a simple connection, without complex communication parameter programming. The system also supports remote monitoring and firmware updates, making servicing and diagnostics easier after installation.


### Is the low-voltage EK60 B3 battery suitable for a large house or small business?

Yes, thanks to its modular design, the EK60 B3 scales from a single 16 kWh unit, suitable for a single-family home, up to a 256 kWh system when 16 batteries are connected in parallel. This makes the series suitable for typical prosumer installations as well as larger commercial sites with higher stored energy demand.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/Battery_EK60_B3-160-LV_16kWh-LV_Datasheet_en_APAC-74532a83bc59.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolaX TB-LD160](https://comparepv.com/battery/solax-tb-ld160) | 15.2 kWh |  | 11.2 kW | LV | +1.2 kW |
| [SolaX AEG0616](https://comparepv.com/battery/solax-aeg0616) | 15.2 kWh |  | 6.0 kW | LV | -4.0 kW |
| [SolaX AEG0816](https://comparepv.com/battery/solax-aeg0816) | 15.2 kWh |  | 8.0 kW | LV | -2.0 kW |
| [SolaX LD16-ME](https://comparepv.com/battery/solax-ld16-me) | 15.2 kWh |  | 10.2 kW | LV | Similar on paper |
| [Dyness PowerBrick SC](https://comparepv.com/battery/dyness-powerbrick-sc) | 15.28 kWh |  | 10.2 kW | LV | Similar on paper |
| [Dyness PowerBrick Plus](https://comparepv.com/battery/dyness-powerbrick-plus) | 15.28 kWh |  | 10.2 kW | LV | Similar on paper |
| [Dyness PowerBrick Max](https://comparepv.com/battery/dyness-powerbrick-max) | 15.28 kWh |  | 10.2 kW | LV | Similar on paper |
| [WeCo 5K0-LT 15.36 kWh](https://comparepv.com/battery/weco-5k0-lt-15-36-kwh) | 15.3 kWh |  |  | LV | +0.1 kWh |


---

Source: https://comparepv.com/battery/saj-ek60-b3-16-0-lv

