---
title: "Power Battery Premium x3 6.75 kWh Battery: Specs & Datasheet | ComparePV"
description: "Power Battery Premium x3 6.75 kWh home battery. Specs: 6.0 kW continuous, 6000 cycles, 82.0 kg, 10 yrs warranty."
source: "https://comparepv.com/battery/rct-power-power-battery-premium-x3"
updated: 2026-11-14
---

# Power Battery Premium x3


## Identity

- **Manufacturer:** RCT Power
- **Model:** Power Battery Premium x3
- **Series:** Power Battery Premium
- **Usable energy:** 6.75 kWh
- **Voltage class:** Low voltage
- **Cell technology:** LFP


## How it compares

Compared against 210 batteries from 6 to 12 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 0.89 | 0.67 | Typical | 52 |
| Cycle life | 6000 | 6000 | Typical | 37 |
| Weight per kWh | 12.1 | 12.1 | Typical | 89 |
| Warranty | 10 yrs | 10 yrs | Typical | 13 |


## Specification


### Capacity

- **Usable energy:** 6.75 kWh
- **Nominal energy:** 7.50 kWh
- **Depth of discharge:** 90 %
- **Module energy:** 2.50 kWh
- **Modules per stack:** 2 to 6
- **Max system capacity:** 15.0 kWh
- **Units in parallel:** 2


### Power

- **Continuous discharge power:** 6.00 kW
- **Continuous charge power:** 6.00 kW
- **Max discharge current:** 25 A
- **Max charge current:** 25 A


### Efficiency and lifetime

- **Cycle life:** 6000 cycles
- **Capacity at end of life:** 80 %


### Cells and voltage

- **Voltage class:** Low voltage
- **Nominal voltage:** 76.8 V
- **Operating voltage:** 72 to 83 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Active balancing


### Physical

- **Dimensions:** 831 × 344 mm
- **Weight:** 82.0 kg
- **Enclosure:** IP65
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Operating temperature:** -10 to 50 °C


### Compatibility

- **Protocols:** CAN


### Warranty and certificates

- **Warranty:** 10 years
- **Warranted cycles:** 6000 cycles
- **Certifications:** EN IEC62619, EN IEC60730, EN IEC63056, EN IEC62477-1, UN38.3, EN IEC61000-6-2, EN IEC61000-6-3, EU Batteriegesetz 2023/1542


### Pros

- **LiFePO4 cells with 5,000-6,000 cycles** - The lithium iron phosphate chemistry offers high thermal stability and is cobalt-free, and published specs for the Power Battery line cite 5,000-6,000 full cycles to 80% remaining capacity - a figure on par with tier-1 peers such as BYD Battery-Box Premium HVS or Huawei LUNA2000.
- **Modular scalability across two towers** - A single tower holds 2-6 modules (roughly 1.9 kWh each), and two towers can be paralleled - allowing the system to scale to 20+ kWh without replacing the existing hardware, matching storage capacity to growing household energy demand.
- **High-voltage architecture up to 461 V** - Nominal system voltage ranges from 154 V to 461 V depending on configuration, which, compared to 48 V low-voltage ESS designs, reduces conductor losses and operating current - a tangible efficiency gain when transferring power to the inverter.
- **IP65 enclosure and plug & play install** - The IP65-rated, corrosion-resistant aluminum enclosure allows installation in a garage or outdoors, while plug & play commissioning without extra wiring cuts installer labor time on site.
- **10-year warranty and remote monitoring** - The manufacturer provides a 10-year system warranty, in line with the premium segment standard (BYD, Huawei, Pylontech), and the RCT Power app gives full visibility into battery performance data from anywhere.


### Cons

- **Limited compatibility with third-party inverters** - The high-voltage design (154-461 V) is optimized for RCT Power hybrid inverters, making it harder to retrofit the battery onto an existing PV installation built around a different inverter brand - unlike low-voltage ESS designs that integrate more easily via AC coupling with any system.
- **Capacity granularity in ~1.9 kWh steps** - Expansion happens in roughly 1.9 kWh module increments per tower, a coarser step than some competitors (e.g., Pylontech's 1.2-1.3 kWh modules), limiting how precisely capacity can be matched to a household's actual consumption.


## About this series

Power Battery Premium is a modular, high-voltage energy storage system built for photovoltaic installations that need to grow alongside the owner's changing energy needs. The series relies on **lithium-iron-phosphate (LiFePO4) cells**, valued for their chemical stability, long service life, and low thermal stress even under intensive use. Its standout feature is a **scalable, modular design** - a single tower can house from two to six modules, and two towers can be connected in parallel, allowing capacity to be precisely matched to actual consumption without replacing the entire system down the line. Intelligent cell balancing and high charging efficiency translate into real savings and reduced energy losses over the storage's operating life. Setup is simplified through **plug & play installation** that requires no additional cabling, while the corrosion-resistant aluminum enclosure and **IP65 protection rating** make the unit equally suited to indoor and outdoor placement. The whole system is managed remotely via the **RCT Power App**, offering full data visualization and monitoring from anywhere in the world. It's a solution built for homeowners and installers looking for a flexible, safe, and future-proof energy storage system, backed by a ten-year manufacturer warranty.


## Questions


### How many battery modules can be installed in a single Power Battery Premium tower?

A single Power Battery Premium tower can hold between two and six battery modules, allowing flexible capacity matching to the household's current energy consumption. Additionally, two towers can be connected in parallel if even greater storage capacity is needed. This means the entire system does not have to be replaced when future energy demand increases, for example after adding a heat pump or electric vehicle.


### What cell technology does Power Battery Premium use and what makes it different?

Power Battery Premium uses lithium iron phosphate (LiFePO4) cells, valued for high chemical stability, long lifespan, and low thermal stress even under intensive daily use. Compared to other lithium-ion chemistries, LiFePO4 is safer and less prone to overheating, which matters significantly for storage systems installed inside buildings.


### Can the Power Battery Premium storage system be installed outdoors?

Yes, thanks to its corrosion-resistant aluminum enclosure and IP65 protection rating, the system can be freely placed either indoors or outdoors. This protection level ensures resistance to dust and water jets, which is important given variable weather conditions, where the unit must withstand rain, humidity, and temperature swings throughout the year.


### How long is the warranty on the Power Battery Premium energy storage system?

Manufacturer RCT Power provides a ten-year warranty on the Power Battery Premium series. This is standard for top-tier energy storage systems and reflects the manufacturer's confidence in the durability of the LiFePO4 cells and the quality of the electronic components. For investors, this means real financial security for the first decade of photovoltaic system operation.


### Does installing Power Battery Premium require additional wiring between modules?

No, the system uses plug & play installation, eliminating the need for additional wiring between battery modules. Modules connect directly to each other, significantly speeding up installation and reducing the number of components that could fail. This solution is appreciated by installers because it shortens on-site labor time and minimizes the risk of wiring errors.


### How can I monitor Power Battery Premium's performance in real time?

The entire system is managed remotely via the RCT Power app, which provides full visualization of production, consumption, and battery state-of-charge data. Monitoring is available from anywhere in the world, allowing quick detection of irregularities and control over the photovoltaic installation's efficiency even while traveling.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/11_Datasheet_Power_Battery_Premium_EN-c7133ad3a22c.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Discover Battery 42-48-6650](https://comparepv.com/battery/discover-battery-42-48-6650) | 6.65 kWh |  |  | LV | Similar on paper |
| [SolaX T-BAT LR7.5](https://comparepv.com/battery/solax-t-bat-lr7-5) | 6.9 kWh |  |  | LV | +0.2 kWh |
| [Livoltek BLF-B51150](https://comparepv.com/battery/livoltek-blf-b51150) | 6.91 kWh |  | 5.1 kW | LV | +0.2 kWh, -0.9 kW |
| [BMZ ESS Z](https://comparepv.com/battery/bmz-ess-z) | 7.1 kWh | 95.0% |  | LV | +0.3 kWh |
| [SRNE SR-EOS08B-24](https://comparepv.com/battery/srne-sr-eos08b-24) | 7.16 kWh |  |  | LV | +0.4 kWh |
| [BSLBATT B-LFP48-130PW](https://comparepv.com/battery/bslbatt-b-lfp48-130pw) | 6.18 kWh |  | 3.3 kW | LV | -0.6 kWh, -2.7 kW |
| [Victron Energy LFP-25,6/300](https://comparepv.com/battery/victron-energy-lfp-25-6-300) | 7.68 kWh | 92.0% | 7.7 kW | LV | +0.9 kWh, +1.7 kW |
| [Sungrow MGL060](https://comparepv.com/battery/sungrow-mgl060) | 5.8 kWh |  | 3.1 kW | LV | -1.0 kWh, -2.9 kW |


---

Source: https://comparepv.com/battery/rct-power-power-battery-premium-x3

