---
title: "Pytes HV48100 12S 55.3 kWh Battery: Specs & Datasheet | ComparePV"
description: "Pytes HV48100 12S 55.3 kWh home battery. Specs: 30.7 kW continuous, 6000 cycles, 138.0 kg."
source: "https://comparepv.com/battery/pytes-hv48100-12s"
updated: 2026-11-14
---

# Pytes HV48100 12S


## Identity

- **Manufacturer:** Pytes
- **Model:** HV48100 12S
- **Series:** HV48100
- **Usable energy:** 55.3 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 93.0% |  |  |
| Power per kWh | 0.56 | 0.52 | Typical | 61 |
| Cycle life | 6000 | 8000 | Weak - bottom 22% | 98 |
| Weight per kWh | 2.5 | 10.4 | Strong - top 1% | 4 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 55.3 kWh
- **Nominal energy:** 61.44 kWh
- **Depth of discharge:** 90 %
- **Module energy:** 5.12 kWh
- **Modules per stack:** 5 to 15
- **Max system capacity:** 76.8 kWh


### Power

- **Continuous discharge power:** 30.72 kW
- **Continuous charge power:** 30.72 kW
- **Max discharge current:** 50 A
- **Max charge current:** 50 A


### Efficiency and lifetime

- **Cycle life:** 6000 cycles


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 614.4 V
- **Operating voltage:** 570 to 691 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 2100 × 595 × 680 mm
- **Weight:** 138.0 kg
- **Enclosure:** IP20
- **Mounting:** rack
- **Operating temperature:** -10 to 50 °C


### Compatibility

- **Protocols:** CAN, RS485, Dry Contact, WiFi, RS232


### Warranty and certificates

- **Warranted cycles:** 6000 cycles
- **Certifications:** UL9540 Ed.2 (2020), UL9540A, UL1973, CE, IEC62619, UN38.3, CEC


### Pros

- **Scalable from 25.6 to 76.8 kWh per stack** - A single BCU stack supports 5 to 15 HV48100 modules, allowing capacity to grow from 25.6 kWh to 76.8 kWh without replacing existing units - a wider range than many peer modular stacks offer.
- **6,000-cycle / 10-year lifespan** - The manufacturer rates the module at over 6,000 cycles (0.5C/0.5C @ 90% DOD, 70% EOL) or 10 years, placing it at the upper end for modular high-voltage LFP battery segments.
- **Lightweight 13.3 kg modules** - Each 5.12 kWh module weighs only 13.3 kg, enabling single-person installation and faster stack assembly compared to heavier, low-voltage single-block battery systems.
- **Broad inverter compatibility** - The HV48100 pairs with popular hybrid inverters such as Sol-Ark and Solis and appears on Victron's compatibility list, easing integration across a range of installation types.


### Cons

- **IP20 rating - indoor installation only** - The standard HV48100 module carries an IP20 protection rating, ruling out outdoor installation without a dedicated enclosure (e.g., the HV48100SE cabinet) - a limitation versus competing systems with native IP65 outdoor protection.
- **Limited independent testing track record** - The series launched in 2024, and comprehensive independent long-term reviews (e.g., in-depth SolarQuotes testing) are still scarce - real-world durability assessment currently relies mainly on manufacturer-provided data.


## About this series

The **Pytes HV48100** series is a modular high-voltage energy storage system designed for easy expansion and flexible adaptation to installation needs - from residential PV systems to larger commercial sites. Each module, built on lithium iron phosphate (LFP) cells, connects into a stack with the others, and the **stackable architecture** allows capacity to be increased freely without replacing the entire system - simply add more units. The whole setup is managed by a dedicated battery control unit (BCU) working alongside a **built-in, advanced BMS** that continuously monitors voltage, current, and temperature of every module, protecting against overcharge, deep discharge, and overheating. It is precisely this intelligent control and modular design that sets the HV48100 apart from competing solutions built around rigid, non-divisible battery blocks. The series suits installers and investors looking for storage that can be scaled in stages as energy demand grows, without having to predict the final power requirement at the outset of the project. Thanks to its **long cycle lifespan** and robust BMS safeguards, the Pytes HV48100 offers a thoughtful alternative to low-voltage solutions, combining the simple assembly of a typical modular storage system with industrial-grade reliability.


## Questions


### What is the capacity of a single Pytes HV48100 module and how many modules can be stacked together?

A single HV48100 module has a nominal voltage of 51.2V and a capacity of 100Ah, giving roughly 5.12kWh of energy. Thanks to its stackable architecture, modules are connected in series into a single stack managed by the BCU control unit, allowing total storage capacity to be scaled up in stages without replacing already installed units.


### How many charge cycles does the Pytes HV48100 battery withstand?

HV48100 modules, built on LFP cells, are rated for at least 6000 charge/discharge cycles at 90% depth of discharge (DOD) while retaining adequate residual capacity. This is one of the key advantages of lithium iron phosphate chemistry compared to other battery chemistries, ensuring a long service life for the storage system.


### What warranty comes with the Pytes HV48100 energy storage system?

The manufacturer provides a 10-year warranty from the activation date, or until 6000 cycles at 90% DOD are reached (whichever comes first), with a minimum retained capacity of 70%. This warranty period aligns with the typical amortization horizon of a residential PV installation.


### How does the HV48100 stackable architecture differ from low-voltage storage systems?

Low-voltage systems connect batteries in parallel, which requires identical modules and limits scalability. The HV48100 instead connects modules in series into a single high-voltage stack managed by the BCU, allowing capacity to be freely expanded by adding more units while also improving energy transfer efficiency through lower current losses.


### How does the BMS in the Pytes HV48100 protect the battery from damage?

The built-in BMS in each module continuously monitors cell voltage, current, and temperature, communicating via CAN/RS485 with the overarching BCU that manages the whole stack. If overcharging, deep discharge, or overheating is detected, the system automatically disconnects the module or limits current, protecting the battery and extending its service life.


### What type of PV installations is the Pytes HV48100 series best suited for?

The HV48100 works well for both residential PV systems and larger commercial sites, since capacity can be increased gradually as energy demand grows. It's a good fit for investors who don't want to commit to a final storage size upfront and prefer to expand the system modularly as the project progresses.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/35e42d09188e427b68b0936836b1a671-df8f7b8cdffc.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sol-Ark L3 HVR-60](https://comparepv.com/battery/sol-ark-l3-hvr-60) | 55.3 kWh | 94.0% | 61.4 kW | HV | +30.7 kW |
| [Sol-Ark L3 HV-60](https://comparepv.com/battery/sol-ark-l3-hv-60) | 55.3 kWh | 94.0% | 61.4 kW | HV | +30.7 kW |
| [Deye BOS-G60 Pro](https://comparepv.com/battery/deye-bos-g60-pro) | 55.3 kWh |  | 61.4 kW | HV | +30.7 kW |
| [Livoltek BHF-G60](https://comparepv.com/battery/livoltek-bhf-g60) | 55.3 kWh |  | 30.7 kW | HV | Similar on paper |
| [FelicityESS FLH-E60](https://comparepv.com/battery/felicityess-flh-e60) | 55.3 kWh |  |  | HV | Similar on paper |
| [Sunsynk SS-CS-GE-F60](https://comparepv.com/battery/sunsynk-ss-cs-ge-f60) | 55.29 kWh | 91.0% | 50.0 kW | HV | +19.3 kW |
| [Deye BOS-G60](https://comparepv.com/battery/bos-g60) | 55.29 kWh |  |  | HV | Similar on paper |
| [SolaX T-HS61.4](https://comparepv.com/battery/solax-t-hs61-4) | 55.2 kWh |  | 36.9 kW | HV | +6.2 kW |


---

Source: https://comparepv.com/battery/pytes-hv48100-12s

