---
title: "Livoltek BES-H37.5X80 72 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "Livoltek BES-H37.5X80 72 kWh all-in-one home battery. Specs: 1025.0 kg, 10 yrs warranty."
source: "https://comparepv.com/battery/livoltek-bes-h37-5x80"
updated: 2026-11-14
---

# Livoltek BES-H37.5X80


## Identity

- **Manufacturer:** Livoltek
- **Model:** BES-H37.5X80
- **Series:** LuminBlock H
- **Usable energy:** 72 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 93.0% |  |  |
| Power per kWh | - | 0.52 |  |  |
| Cycle life | - | 8000 |  |  |
| Weight per kWh | 14.2 | 10.4 | Weak - bottom 19% | 200 |
| Warranty | 10 yrs | 10 yrs | Typical | 6 |


## Specification


### Capacity

- **Usable energy:** 72 kWh
- **Nominal energy:** 80.00 kWh
- **Depth of discharge:** 90 %
- **Module energy:** 20.10 kWh
- **Modules per stack:** 4 to 6
- **Max system capacity:** 120.6 kWh
- **Units in parallel:** 10


### Power

- **Max discharge current:** 157 A
- **Max charge current:** 157 A
- **Peak discharge current:** 179 A


### Efficiency and lifetime

- **Capacity at end of life:** 70 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 256.0 V
- **Operating voltage:** 224 to 288 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Thermal management


### Built-in inverter

- **Phases:** Three-phase
- **MPPT trackers:** 5


### Physical

- **Dimensions:** 2100 × 1349 × 990 mm
- **Weight:** 1025.0 kg
- **Enclosure:** IP55 (cabinet) / IP66 (inverter)
- **Mounting:** floor
- **Cooling:** active-air
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Protocols:** RS485, Wi-Fi, CAN, DI, DO


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** IEC61727, IEC62116, EN50549-1, EN50549-10, IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC/EN 62920


### Pros

- **Factory-integrated plug & play design** - The LiFePO4 battery and hybrid inverter ship pre-integrated and factory-tested in a single enclosure, eliminating on-site component pairing and reducing installation time compared to modular systems assembled from separate units.
- **200% PV oversizing support** - The system accepts PV input up to 200% of inverter rated power, allowing a larger array to be installed without upsizing the inverter itself and maximizing solar harvest even at limited AC output.
- **Sub-10 ms STS switchover** - The Static Transfer Switch function with under 10 ms transfer time provides a virtually imperceptible switch to backup power, critical for sensitive loads in EV charging stations or industrial facilities where downtime translates into direct losses.
- **Standard AFCI protection** - Arc-fault circuit protection is included as standard, whereas competing all-in-one lines from the same manufacturer (e.g., iPower HES) list AFCI only as an optional add-on - a genuine safety advantage at no extra cost.
- **Scalable to hundreds of kWh with genset support** - Units can be paralleled into installations reaching hundreds of kilowatt-hours and support diesel generator integration, making the series a flexible platform for both large single homes and commercial/industrial projects without switching hardware families.


### Cons

- **Limited public product documentation** - As of this review, no publicly available datasheet, pricing, or detailed warranty terms could be found for the LuminBlock H series, unlike older Livoltek lines (e.g., iPower HES) for which such data is openly published. This makes independent spec verification harder before purchase.
- **Shorter track record in commercial/industrial segment** - Livoltek is best known in the residential segment (iPower, Hyper), while LuminBlock H targets large C&I installations - a segment where it competes against manufacturers with longer reference-deployment histories (e.g., Sungrow, Huawei, BYD), meaning fewer available case studies for large-scale projects.


## About this series

The LuminBlock H series is a complete, factory-integrated all-in-one energy storage system that combines LiFePO4 battery packs with a hybrid inverter in a single, ready-to-run enclosure. The solution is built for large residential complexes, EV charging stations, supermarkets, farms, and industrial facilities, where both power reliability and investment payback matter equally. The series' key advantage is its **plug & play design** - each unit is tested and configured at the factory, dramatically cutting installation time and eliminating on-site wiring errors. The system supports **200% PV oversizing**, letting owners capture maximum solar yield even with a comparatively smaller inverter, while the built-in **STS function with sub-10ms switching** ensures a seamless transition to backup power with no interruption to critical loads. Safety is reinforced by **standard AFCI protection** against arc-fault fires, along with multi-layer battery safeguards and real-time cell health alerts. The whole system can be managed remotely thanks to **24/7 cloud monitoring**, simplifying diagnostics and maintenance without site visits. It works seamlessly alongside diesel generators and can be paralleled into installations reaching hundreds of kilowatt-hours, making it a versatile choice for commercial and industrial ESS projects.


## Questions


### How does LuminBlock H differ from a traditional energy storage system built from separate components?

LuminBlock H is an all-in-one unit where the LiFePO4 battery and hybrid inverter are factory-integrated into a single enclosure. Unlike systems assembled on-site from separate parts, LuminBlock H is tested and configured at the factory, which significantly shortens installation time and reduces the risk of wiring or configuration errors.


### Can I connect PV panels with more capacity than the inverter's rated power to LuminBlock H?

Yes, the system supports up to 200% PV oversizing relative to the inverter's rated power. This lets you install more panels than the inverter's nominal capacity would normally allow, capturing more solar energy during the day and shortening payback time, especially when roof space is limited.


### How fast does LuminBlock H switch to backup power during a grid outage?

The built-in STS (Static Transfer Switch) function switches to backup mode in under 10 milliseconds. That transfer time is short enough that critical loads such as servers, medical equipment, or refrigeration systems continue running without a noticeable interruption during a grid outage.


### Is LuminBlock H safe for use in commercial and industrial buildings?

Yes, the series includes standard AFCI protection against arc-fault fires, along with multi-layer BMS protection that provides health alerts for individual battery cells. These safeguards are typically required for large commercial installations such as supermarkets, EV charging stations, and industrial facilities.


### Can multiple LuminBlock H units be combined into a larger system?

Yes, LuminBlock H units can be connected in parallel to build installations reaching hundreds of kilowatt-hours of capacity. This makes the series a scalable solution, suitable for a single farm as well as for large-scale commercial and industrial ESS projects.


### Can LuminBlock H be serviced remotely without an on-site technician visit?

To a large extent, yes. The system offers 24/7 cloud-based monitoring that allows remote diagnostics of battery status, inverter performance, and operating parameters. This helps detect issues quickly and, in many cases, resolve them or schedule service without requiring an immediate technician visit.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/DS_BES-H60X120-731991285173.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [TESVOLT TS HV 50/9-20](https://comparepv.com/battery/tesvolt-ts-hv-50-9-20) | 72 kWh | 98.0% | 72.9 kW | HV | Similar on paper |
| [Livoltek BHF-X80D](https://comparepv.com/battery/livoltek-bhf-x80d) | 72 kWh |  | 40.2 kW | HV | Similar on paper |
| [Livoltek BES-H40X80](https://comparepv.com/battery/livoltek-bes-h40x80) | 72 kWh |  |  | HV | Similar on paper |
| [Alpha ESS STORION-H30-G3](https://comparepv.com/battery/alpha-ess-storion-h30-g3) | 72.3 kWh | 92.0% | 30.0 kW | HV | +0.3 kWh |
| [Livoltek BHF-C80](https://comparepv.com/battery/livoltek-bhf-c80) | 72.3 kWh |  | 40.2 kW | HV | +0.3 kWh |
| [FelicityESS FLH48314UG1MN (5 Modules)](https://comparepv.com/battery/felicityess-flh48314ug1mn-5-modules) | 72.34 kWh |  |  | HV | +0.3 kWh |
| [Sigenergy SigenStack x6](https://comparepv.com/battery/sigenergy-sigenstack-x6) | 72.36 kWh |  |  | HV | +0.4 kWh |
| [Dyness STACK100](https://comparepv.com/battery/dyness-stack100) | 72.96 kWh |  | 5.1 kW | HV | +1.0 kWh |


---

Source: https://comparepv.com/battery/livoltek-bes-h37-5x80

