---
title: "Livoltek AES-5kWh-G1 4.61 kWh Battery: Specs & Datasheet | ComparePV"
description: "Livoltek AES-5kWh-G1 4.61 kWh home battery. Specs: 5.1 kW continuous, 6000 cycles, 56.0 kg."
source: "https://comparepv.com/battery/livoltek-aes-5kwh-g1"
updated: 2026-11-14
---

# Livoltek AES-5kWh-G1


## Identity

- **Manufacturer:** Livoltek
- **Model:** AES-5kWh-G1
- **Series:** AES
- **Usable energy:** 4.61 kWh
- **Voltage class:** Low voltage
- **Cell technology:** LFP


## How it compares

Compared against 190 batteries up to 6 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 1.11 | 0.88 | Strong - top 18% | 26 |
| Cycle life | 6000 | 6000 | Typical | 30 |
| Weight per kWh | 12.1 | 10.7 | Typical | 124 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 4.61 kWh
- **Nominal energy:** 5.12 kWh
- **Depth of discharge:** 90 %
- **Module energy:** 5.12 kWh
- **Max system capacity:** 30.7 kWh
- **Units in parallel:** 5


### Power

- **Continuous discharge power:** 5.12 kW
- **Continuous charge power:** 4.35 kW
- **Max discharge current:** 100 A
- **Max charge current:** 85 A


### Efficiency and lifetime

- **Cycle life:** 6000 cycles
- **Capacity at end of life:** 70 %


### Cells and voltage

- **Voltage class:** Low voltage
- **Nominal voltage:** 51.2 V
- **Operating voltage:** 40 to 58 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 586 × 560 × 190 mm
- **Weight:** 56.0 kg
- **Enclosure:** IP65
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Cooling:** passive
- **Operating temperature:** -10 to 55 °C


### Compatibility

- **Protocols:** RS485, CAN


### Warranty and certificates

- **Warranted cycles:** 6000 cycles
- **Certifications:** IEC 62619, CE, UN38.3, IEC 61000


### Pros

- **Modular, scalable design** - The system starts with a single unit and lets users add modules in parallel as demand grows (extra heating, EV charging, home extensions) without replacing the whole installation - a real advantage over fixed-capacity, non-scalable storage systems.
- **IP65 enclosure - indoor and outdoor mounting** - The IP65 ingress protection rating allows wall or floor installation in a garage, boiler room, or outdoors, giving installers much more location flexibility than storage units limited to enclosed spaces (IP20/IP21).
- **Safe prismatic LFP cells** - LiFePO4 chemistry in prismatic format offers high thermal stability and tolerance to deep discharge, translating into long cycle life typical of this technology (usually several thousand cycles at high DOD) compared to older NMC cells.
- **Multi-level BMS** - A smart BMS with overcharge, overheating, and short-circuit protection ensures safe, unattended operation - a quality standard expected from tier-1 low-voltage storage systems.
- **Simple installation and parallel stacking** - Parallel connection of multiple units without additional controllers makes the system suitable for both small prosumer installations and larger, multi-module residential configurations.


### Cons

- **Low-voltage architecture - higher losses and currents** - LV systems (approx. 48-57.6V) operate at higher working currents than high-voltage storage of the same capacity, requiring thicker DC cabling, higher cable losses, and limited distance from the inverter - a general limitation of the whole LV class versus competing HV systems (e.g., 200-500V).
- **More modules needed for large capacities** - When scaling beyond roughly 15-20 kWh, the LV modular architecture requires more individual units than high-voltage stackable solutions, increasing BoS cost per kWh (cabling, protection devices) compared to HV systems from the same manufacturer.


## About this series

The Livoltek AES series comprises low-voltage energy storage batteries built on LFP (LiFePO4) cells, designed for residential solar installations that need to grow alongside household demand. The modular design allows flexible system expansion - start with a single unit and add more modules in parallel as energy needs increase, without replacing the entire system. This makes it especially useful for homeowners just planning their PV installation or those looking to future-proof against home extensions, additional heating loads, or an EV charging station. The enclosure's **IP65 ingress protection** allows installation both indoors and outdoors - wall-mounted or floor-standing - giving installers freedom to choose the location based on available space. The series stands out with its **intelligent BMS featuring multi-layer protection**, safeguarding the battery against overcharging, overheating, and short circuits for safe, long-term operation. The use of **safe prismatic LFP cells** translates into **long cycle life** and stable performance even under deep discharge conditions. With straightforward installation and the ability to connect several units in parallel, the AES series fits both small and larger prosumer installations.


## Questions


### Can the Livoltek AES battery storage system be expanded with more modules later?

Yes, this is the main advantage of the AES series. The system starts with a single unit, and additional battery modules can be added in parallel without replacing the existing installation or rebuilding the whole system. This lets homeowners start with a smaller capacity and add modules later as energy demand grows, for example after installing a heat pump or an EV charging station.


### Can the Livoltek AES battery be installed outdoors?

Yes, the AES series enclosure has an IP65 protection rating, giving full protection against dust and water jets. This allows installation in a garage or utility room, as well as outdoors on a wall or floor-standing. This flexibility is useful when there is no indoor space available for the battery or inverter.


### What safety protections does the BMS in the Livoltek AES battery provide?

The AES series uses an intelligent BMS with multi-level protection that continuously monitors voltage, temperature, and current at the cell level. It protects the battery against overcharging, deep discharge, overheating, and short circuits. This safety architecture extends battery lifespan and ensures unattended, reliable operation for years.


### How do the LFP (LiFePO4) cells in the AES series differ from common NMC lithium-ion cells?

LFP cells used in the AES series are chemically more stable than NMC cells - they contain no cobalt and are far less prone to overheating or thermal runaway, which matters for residential installations. Prismatic LFP cells also offer longer cycle life and better tolerance to deep discharge, so the battery retains high usable capacity even after many years of operation.


### Is the Livoltek AES storage system suitable for someone who doesn't have a PV system yet?

Yes, the AES series is specifically designed for investors who are still planning their PV installation. Its modular design lets you choose a starting capacity that matches current household needs, and if the home is later extended or gets electric heating or an EV charger, the system can simply be expanded with more modules instead of buying a new battery from scratch.


### Does the low-voltage AES battery require a specific Livoltek inverter?

Low-voltage batteries like the AES series are typically designed to pair with a dedicated line of low-voltage hybrid inverters from the same manufacturer, so compatibility with the specific Livoltek inverter model should be confirmed before purchase or checked with your installer. This ensures proper BMS-to-inverter communication and full access to energy management features.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/DS_AES-5KWH-G1Low_Voltage_Battery-6fad6e324487.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Pytes E-BOX 48100R](https://comparepv.com/battery/pytes-e-box-48100r) | 4.61 kWh | 95.0% | 2.6 kW | LV | -2.6 kW |
| [Dyness DL5.0C](https://comparepv.com/battery/dyness-dl5-0c) | 4.61 kWh | 90.0% | 2.6 kW | LV | -2.6 kW |
| [Sofar Solar GTX 5000S](https://comparepv.com/battery/sofar-solar-gtx-5000s) | 4.61 kWh |  | 2.6 kW | LV | -2.6 kW |
| [Livoltek BLF-SR05](https://comparepv.com/battery/livoltek-blf-sr05) | 4.61 kWh |  | 5.8 kW | LV | +0.7 kW |
| [Livoltek BLF-SR51100](https://comparepv.com/battery/livoltek-blf-sr51100) | 4.61 kWh |  | 5.8 kW | LV | +0.7 kW |
| [SUNSYNK-G5.1](https://comparepv.com/battery/sunsynk-sunsynk-g5-1) | 4.61 kWh |  |  | LV | Similar on paper |
| [SolarEdge BAT-05K48 (single module)](https://comparepv.com/battery/solaredge-bat-05k48-single-module) | 4.6 kWh | 95.4% | 5.0 kW | LV | Similar on paper |
| [KSTAR BP48100PF1A-G2](https://comparepv.com/battery/kstar-bp48100pf1a-g2) | 4.6 kWh | 94.0% | 4.1 kW | LV | -1.0 kW |


---

Source: https://comparepv.com/battery/livoltek-aes-5kwh-g1

