---
title: "Growatt APX 25.0M-S3 25 kWh Battery: Specs & Datasheet | ComparePV"
description: "Growatt APX 25.0M-S3 25 kWh home battery. Specs: 12.5 kW continuous, 10000 cycles, 233.2 kg, 10 yrs warranty."
source: "https://comparepv.com/battery/growatt-apx-25-0m-s3"
updated: 2026-11-14
---

# Growatt APX 25.0M-S3


## Identity

- **Manufacturer:** Growatt
- **Model:** APX 25.0M-S3
- **Series:** APX HV Battery 2.0
- **Usable energy:** 25 kWh
- **Cell technology:** LFP


## How it compares

Compared against 305 batteries from 20 to 50 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | 0.50 | 0.55 | Typical | 141 |
| Cycle life | 10000 | 6000 | Strong - top 9% | 10 |
| Weight per kWh | 9.3 | 10.1 | Strong - top 25% | 59 |
| Warranty | 10 yrs | 10 yrs | Typical | 10 |


## Specification


### Capacity

- **Usable energy:** 25 kWh
- **Nominal energy:** 25.00 kWh
- **Depth of discharge:** 100 %
- **Module energy:** 5.00 kWh
- **Max system capacity:** 25.0 kWh


### Power

- **Continuous discharge power:** 12.50 kW
- **Peak discharge power:** 17.50 kW


### Efficiency and lifetime

- **Cycle life:** 10000 cycles
- **Capacity at end of life:** 60 %


### Cells and voltage

- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Thermal management


### Physical

- **Dimensions:** 1485 × 590 × 255 mm
- **Weight:** 233.2 kg
- **Enclosure:** IP66
- **Mounting:** wall
- **Cooling:** passive
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Protocols:** CAN, RS485


### Warranty and certificates

- **Warranty:** 10 years
- **Warranted cycles:** 10000 cycles
- **Certifications:** IEC62619, IEC60730, IEC62477-1, IEC62040-1, CE(EN61000), UN38.3, IEC60529, REACH, CEC


### Pros

- **Cable-free stacked module assembly** - The stacked construction of APX HV Battery 2.0 eliminates additional inter-module wiring, confirmed in practice by installers (e.g., Greenspire on early 10 kWh installs) as a notable reduction in installation time compared to competing modular systems requiring separate BMS cabling.
- **100% DoD on LFP cells** - Cobalt-free lithium iron phosphate (LFP) chemistry combined with the stated full depth of discharge allows the full declared 5-30 kWh capacity to be used, whereas some competing ESS units cap DoD at 90-95% to preserve cell longevity.
- **Wide operating range from -20°C to 55°C** - With built-in heating film, the battery can be installed in unheated garages, basements, and outdoors (IP66 enclosure), exceeding the typical 0°C to 50°C range offered by many competitors that restrict installation to heated spaces.
- **Backward compatibility with older APX modules** - The ability to mix new 2.0 modules with legacy APX HV units protects the investment of customers expanding previously installed systems - a rarity in the segment, where generational platform shifts usually force a full stack replacement.
- **Single master module for single- and three-phase** - A universal master module supporting up to 15 kW in three-phase configuration and 10 kW single-phase simplifies equipment selection and spare-parts stocking for installers, removing the need for two separate product lines.


### Cons

- **Growatt not on BNEF Tier-1 bankable list** - Unlike manufacturers such as BYD, Huawei, or LG Energy Solution, Growatt does not appear on the BNEF Tier-1 bankable list, which can complicate securing bank or leasing finance for larger commercial projects.
- **Limited inverter compatibility at launch** - As of its 2026 launch, APX HV Battery 2.0 is officially confirmed only with the Growatt MOD-HU hybrid inverter series, with further compatibility announced as forthcoming - limiting flexibility for mixed-brand installations.
- **No independent long-term testing yet** - As a product launched in 2026, the series lacks independent field testing or multi-year failure-rate data - only manufacturer materials and early installer reports are currently available.


## About this series

The Growatt APX HV Battery 2.0 is the second generation of this high-voltage energy storage series, built around faster installation and easier system expansion. The lineup relies on a **stacked, cable-free modular design**, letting installers add battery modules in a near plug-and-play fashion, which cuts setup time and reduces the risk of wiring mistakes. At its core are **cobalt-free lithium iron phosphate (LFP) cells**, known for chemical stability and long service life, paired with a **full 100% depth of discharge (DoD)** rating that lets owners actually use the entire rated capacity. The APX 2.0 also stands out with its **unified master module compatible with both single-phase and three-phase systems**, simplifying equipment selection for residential and small commercial installations. Thanks to a built-in heating film and a **wider operating temperature range from -20°C to 55°C**, the battery performs reliably in garages, basements, or unheated utility rooms. A key advantage is the ability to mix new and previous-generation APX modules within a single system, protecting the investment of customers expanding storage they installed earlier. This makes it a strong fit for installers who need fast deployment and homeowners who want a scalable, weather-resilient energy storage solution.


## Questions


### Can Growatt APX HV Battery 2.0 modules be connected without extra wiring?

Yes, the APX 2.0 uses a modular stack design where additional battery modules are connected mechanically in a vertical stack without the need to run extra cables between cells. The installer simply stacks module on module in a near plug-and-play fashion, which shortens installation time and reduces the risk of wiring errors compared to traditional cabinet-based systems.


### What is the maximum capacity achievable with the APX HV Battery 2.0 system?

The system is built from 5 kWh battery modules that are stacked on a shared base, reaching a capacity of 5 to 30 kWh in a single setup. This lets installers size the storage system to match a single-family home or a small commercial site, and expand it later with additional modules as needed.


### Does the APX 2.0 work in an unheated garage or basement in winter?

Yes, the battery includes a built-in heating film and operates across a temperature range of -20°C to 55°C, which is wider than the previous APX generation. This makes the unit suitable for installation in garages, basements, or unheated utility rooms without requiring supplemental room heating.


### How does the APX 2.0 master module differ from earlier versions for single-phase and three-phase setups?

The APX 2.0 introduces a unified master module that supports both single-phase and three-phase systems without requiring separate hardware variants. This simplifies component selection and inventory for installers, since the same master module fits a typical single-family home as well as a three-phase small commercial installation.


### Can older APX modules be combined with new APX 2.0 modules in one system?

Yes, Growatt provides backward compatibility, allowing previously installed APX modules to run alongside new APX 2.0 modules within the same system. This protects the investment of customers who want to expand an existing energy storage system without replacing the entire installation with the new generation.


### What warranty does the Growatt APX HV Battery 2.0 carry, and can the full rated capacity be used?

Distributors and retailers most commonly quote a 10-year warranty for the APX series, though the exact term should be confirmed in the warranty document applicable to your region. Thanks to LFP cells and a full 100% depth of discharge (DoD), users can actually use the entire rated capacity of the battery without reserving part of it for longevity.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/APX_50-300M-S3-20_Datasheet_202609_EN-0edcf6b21a72.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Duracell 15-25](https://comparepv.com/battery/duracell-15-25) | 25 kWh |  | 12.0 kW |  | -0.5 kW |
| [Sigenergy SigenStor BAT stack (3 modules)](https://comparepv.com/battery/sigenergy-sigenstor-bat-stack-3-modules) | 24.18 kWh |  | 12.0 kW |  | -0.8 kWh, -0.5 kW |
| [PowerPlus Energy PEF6W-B250](https://comparepv.com/battery/powerplus-energy-pef6w-b250) | 24 kWh |  |  |  | -1.0 kWh |
| [E3/DC S10 Xplus 24](https://comparepv.com/battery/e3-dc-s10-xplus-24) | 23.6 kWh | 95.0% | 12.5 kW |  | -1.4 kWh |
| [E3/DC S10 Xflex 24](https://comparepv.com/battery/e3-dc-s10-xflex-24) | 23.6 kWh |  | 15.0 kW |  | -1.4 kWh, +2.5 kW |
| [E3/DC S10 Xflex COMPACT 24](https://comparepv.com/battery/e3-dc-s10-xflex-compact-24) | 23.6 kWh |  | 13.0 kW |  | -1.4 kWh, +0.5 kW |
| [Sigenergy SigenStor BAT 8.0 system (3 modules)](https://comparepv.com/battery/sigenergy-sigenstor-bat-8-0-system-3-modules) | 23.4 kWh |  | 12.0 kW |  | -1.6 kWh, -0.5 kW |
| [E3/DC S10 Xplus 21](https://comparepv.com/battery/e3-dc-s10-xplus-21) | 20.6 kWh | 95.0% | 11.0 kW |  | -4.4 kWh, -1.5 kW |


---

Source: https://comparepv.com/battery/growatt-apx-25-0m-s3

