---
title: "GoodWe GW125/261-ESA-LCN-G11 261.25 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "GoodWe GW125/261-ESA-LCN-G11 261.25 kWh all-in-one home battery. Specs: 92.0% round-trip efficiency, 125.0 kW continuous, 2580.0 kg."
source: "https://comparepv.com/battery/goodwe-gw125-261-esa-lcn-g11"
updated: 2026-11-14
---

# GoodWe GW125/261-ESA-LCN-G11


## Identity

- **Manufacturer:** GoodWe
- **Model:** GW125/261-ESA-LCN-G11
- **Series:** ESA
- **Usable energy:** 261.25 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 92.0% | 93.0% | Typical | 64 |
| Power per kWh | 0.48 | 0.52 | Typical | 170 |
| Cycle life | - | 8000 |  |  |
| Weight per kWh | 9.9 | 10.4 | Typical | 94 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 261.25 kWh
- **Nominal energy:** 261.25 kWh
- **Depth of discharge:** 90 %
- **Module energy:** 52.25 kWh
- **Max system capacity:** 261.2 kWh
- **Units in parallel:** 20


### Power

- **Continuous discharge power:** 125.00 kW
- **Continuous charge power:** 125.00 kW
- **Peak discharge power:** 137.50 kW
- **Max discharge current:** 188 A
- **Max charge current:** 188 A
- **Peak discharge current:** 198 A


### Efficiency and lifetime

- **Round-trip efficiency:** 92.0 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 832.0 V
- **Operating voltage:** 676 to 936 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Thermal management


### Built-in inverter

- **Inverter power:** 125.0 kW
- **Phases:** Three-phase
- **Backup power:** 125.0 kW


### Physical

- **Dimensions:** 2250 × 1050 × 1400 mm
- **Weight:** 2580.0 kg
- **Enclosure:** IP54
- **Cooling:** liquid
- **Noise:** 70 dB
- **Operating temperature:** -25 to 55 °C


### Compatibility

- **Protocols:** Modbus TCP, Modbus RTU


### Pros

- **Highest TÜV Rheinland SOC accuracy class** - The ESA system achieved Level 3 (the top rating) in the state-of-charge accuracy test under the 2 PfG 3165/12.25 specification, with SOC deviation of only 1.23%. In a cluster-balancing test, the system reduced a 39.6% SOC gap between battery clusters to zero, confirming BMS algorithm effectiveness.
- **Certified lowest noise level in class** - ESA became the world's first all-in-one energy storage system to earn TÜV Rheinland's Grade A rating for low noise, operating below 30 dB thanks to a fanless cooling design - a notable advantage when installed near bedroom windows.
- **Broad scalability from residential to C&I** - The portfolio spans single-phase units at 3-10 kW / 5-48 kWh, three-phase systems at 5-30 kW with up to 108 kWh of storage, and commercial containers at 125 kW / 261 kWh that can be paralleled - one ecosystem covers both prosumer and commercial segments without switching platforms.
- **BNEF Tier 1 status and IP66 all-in-one rating** - The manufacturer confirmed BNEF Tier 1 status for the ESA series, supporting project bankability. The IP66 enclosure and allowed PV oversizing of up to 200% enable outdoor installation and flexible sizing of larger PV arrays without voiding the warranty.
- **Fast grid-to-backup transfer time** - Transfer time between on-grid and off-grid operation is under 4 ms, meaning in practice no noticeable interruption for critical home loads during backup switchover.


### Cons

- **Short market track record, no long-term field data** - The ESA series launched in 2025 (debuted at the Smart Energy Conference in Sydney in April 2025), so unlike established competitors such as Tesla Powerwall or BYD Battery-Box, it lacks several years of field operating history, making it harder to assess real-world degradation and service durability.


## About this series

The GoodWe ESA series is a comprehensive all-in-one energy storage platform that integrates a hybrid inverter, modular batteries, and an energy management system into a single, factory-wired unit. This gives installers simpler installation, fewer connections, and fewer potential points of failure compared to systems built from separate components by different manufacturers. At the core of the system are **lithium iron phosphate (LFP) cells**, valued for their chemical stability and long cycle life, backed by a multi-layer safety architecture and arc-fault protection. The series stands out for its **modular scalability** - from compact single-phase units for single-family homes, through three-phase systems for larger households, up to industrial-grade units that can be paralleled into megawatt-scale installations. Quality is confirmed by a **TÜV Rheinland certification at the highest SOC accuracy level**, ensuring precise state-of-charge mapping and smart cell balancing. Homeowners also appreciate the system for its **certified low operating noise level** and weatherproof enclosure, which allows for outdoor installation. GoodWe ESA is built for installers and investors looking for a flexible, safe, and easy-to-integrate energy storage solution, regardless of project scale.


## Questions


### How does the GoodWe ESA differ from energy storage systems built from separate components?

The GoodWe ESA is an all-in-one design: the hybrid inverter, LFP battery modules, and the energy management system (BMS) are factory-integrated and pre-wired in a single enclosure. This means installers deal with fewer cables and connections compared to pairing an inverter and battery from different manufacturers, shortening installation time and reducing both installation errors and potential points of failure in the system.


### What battery cell technology does GoodWe ESA use, and is it safe?

The ESA series uses lithium iron phosphate (LFP) cells, widely regarded as one of the most thermally stable lithium chemistries available for energy storage. LFP has a low tendency to overheat and offers long cycle life. The system also features a multi-layer protection architecture plus arc-fault protection, minimizing the risk of failure in both residential and commercial installations.


### Can the GoodWe ESA storage system be expanded later if household energy consumption increases?

Yes, the ESA series was designed with modular scalability in mind - ranging from compact single-phase units for single-family homes, to three-phase systems for larger households, up to industrial units that can be paralleled into megawatt-scale installations. This lets an investor start with a smaller configuration and add battery modules later instead of replacing the entire system.


### What does the TÜV Rheinland SOC accuracy certification mean for GoodWe ESA, and does it matter in practice?

The TÜV Rheinland certification at the highest SOC (state of charge) accuracy level confirms that the battery's charge-level readings are highly precise, with a measured deviation of just 1.23% in testing. This means users see a realistic charge level instead of an inflated or understated one, enabling better energy-usage planning and extending battery life through intelligent cell balancing.


### Is the GoodWe ESA energy storage system noisy, and can it be installed outdoors?

No, the ESA series received the highest Grade A low-noise rating from TÜV Rheinland for residential storage systems, making it one of the quieter units on the market. The enclosure is also weatherproof, so the system can be installed outdoors, such as on a facade or in a garage, without concerns about moisture or temperature affecting the components.


### Who is the GoodWe ESA series designed for - only single-family homes, or businesses too?

The ESA series spans a wide range of applications: compact single-phase units for single-family homes, three-phase systems for households with higher energy demand, and industrial units that can be connected in parallel to build megawatt-scale installations. This lets installers use the same platform across residential, commercial, and industrial projects.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/GW_ESA-261kWh_Datasheet-EN-2fd5b467d820.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [GoodWe GW125/261-ESA-LCN-G10](https://comparepv.com/battery/goodwe-gw125-261-esa-lcn-g10) | 261.25 kWh | 92.0% | 125.0 kW | HV | Similar on paper |
| [GoodWe GW261.2-BAT-LCD-G10](https://comparepv.com/battery/goodwe-gw261-2-bat-lcd-g10) | 261.2 kWh | 93.0% | 137.5 kW | HV | +1.0 pp round-trip, +12.5 kW |
| [Alpha ESS STORION-LC-TB125](https://comparepv.com/battery/alpha-ess-storion-lc-tb125) | 261.2 kWh |  | 130.6 kW | HV | +5.6 kW |
| [Dyness BF200-C260](https://comparepv.com/battery/dyness-bf200-c260) | 261 kWh | 94.0% |  | HV | -0.2 kWh, +2.0 pp round-trip |
| [Dyness DH200Y-C260](https://comparepv.com/battery/dyness-dh200y-c260) | 261 kWh | 90.0% | 125.0 kW | HV | -0.2 kWh, -2.0 pp round-trip |
| [SAJ CM2-99.9K-261-EU](https://comparepv.com/battery/saj-cm2-99-9k-261-eu) | 261 kWh | 90.0% | 99.9 kW | HV | -0.2 kWh, -2.0 pp round-trip, -25.1 kW |
| [SAJ CM2-125K-261-EU](https://comparepv.com/battery/saj-cm2-125k-261-eu) | 261 kWh | 90.0% | 125.0 kW | HV | -0.2 kWh, -2.0 pp round-trip |
| [Dyness DH200F-C260P124-S0](https://comparepv.com/battery/dyness-dh200f-c260p124-s0) | 261 kWh | 88.0% | 124.9 kW | HV | -0.2 kWh, -4.0 pp round-trip |


---

Source: https://comparepv.com/battery/goodwe-gw125-261-esa-lcn-g11

