---
title: "FranklinWH aPower X 13.6 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "FranklinWH aPower X 13.6 kWh all-in-one home battery. Specs: 89.0% round-trip efficiency, 5.0 kW continuous, 179.0 kg, 12 yrs warranty."
source: "https://comparepv.com/battery/franklinwh-apower-x"
updated: 2026-11-14
---

# FranklinWH aPower X


## Identity

- **Manufacturer:** FranklinWH
- **Model:** aPower X
- **Series:** aPower
- **Usable energy:** 13.6 kWh
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 266 batteries from 12 to 20 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 89.0% | 95.0% | Weak - bottom 5% | 83 |
| Power per kWh | 0.37 | 0.62 | Weak - bottom 5% | 186 |
| Cycle life | - | 6000 |  |  |
| Weight per kWh | 13.2 | 10.9 | Weak - bottom 13% | 196 |
| Warranty | 12 yrs | 10 yrs | Strong - top 9% | 11 |


## Specification


### Capacity

- **Usable energy:** 13.6 kWh
- **Module energy:** 13.60 kWh
- **Modules per stack:** 1 to 15
- **Max system capacity:** 204.0 kWh
- **Units in parallel:** 15


### Power

- **Continuous discharge power:** 5.00 kW
- **Continuous charge power:** 5.00 kW
- **Peak discharge power:** 10.00 kW
- **Peak discharge current:** 118 A


### Efficiency and lifetime

- **Round-trip efficiency:** 89.0 %


### Cells and voltage

- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Built-in inverter

- **Inverter power:** 5.0 kW
- **Backup power:** 10.0 kW


### Physical

- **Dimensions:** 1150 × 750 × 290 mm
- **Weight:** 179.0 kg
- **Enclosure:** IP67
- **Mounting:** wall
- **Outdoor installation:** Yes
- **Cooling:** passive
- **Noise:** 30 dB
- **Operating temperature:** -20 to 50 °C


### Warranty and certificates

- **Warranty:** 12 years
- **Warranted throughput:** 43.0 MWh
- **Certifications:** UL 9540, UL 9540A, UL 1741, UL 1973, IEEE 1547, IEEE 1547.1, UN 38.3, CAN/CSA C22.2 No. 107.1-16, AC 156, OSHPD, IEEE 693-2005, California Proposition 65, RoHS Directive 2011/EU, FCC Part 15 Class B, ICES 003


### Pros

- **Native 208V support** - The aPower series supports 120/208V configurations (up to 4 units in parallel per aGate), which is uncommon in the home ESS segment dominated by 240V systems - making it suitable for multi-family buildings as well as single-family homes.
- **Built-in AC-coupled inverter** - The integrated AC-coupled inverter lets the battery attach to virtually any existing PV installation without replacing the solar inverter, significantly cutting retrofit cost and time compared to DC-coupled systems that require a dedicated hybrid inverter.
- **Scalable up to 204 kWh** - A single 13.6 kWh aPower unit can be modularly combined into battery banks totaling up to 204 kWh, covering both single-family home needs and larger commercial or multi-unit installations.
- **Starts heavy loads during outages** - The system can start high-inrush-current appliances such as air conditioners or heat pumps even during a full grid outage - a capability not always available in competing ESS units of comparable continuous power rating.
- **12-year warranty and LFP durability** - The manufacturer guarantees 12 years or 43 MWh of throughput, and combined with LFP chemistry (thermally safer than NMC), this delivers real longevity measured in thousands of cycles while maintaining stability across a wide temperature range.


### Cons

- **Discontinued, limited service availability** - The aPower series (first generation, 2022-2024) has been discontinued and replaced by the successor aPower 2, meaning limited access to new units, replacement parts, and technical support for existing installations over the long term.
- **Lower continuous power than successor** - Continuous power output of 5 kW is 100% lower than the aPower 2 (10 kW), which in practice limits the number of heavy loads that can be powered simultaneously during backup operation compared to the manufacturer's current model.


## About this series

The aPower series from FranklinWH is a modular energy storage system built on safe **lithium iron phosphate (LFP)** cells, designed for real-world backup scenarios and for taking pressure off a home's solar installation. Its defining feature is a **built-in AC-coupled inverter**, which means the battery can be retrofitted onto almost any existing PV system without replacing the solar inverter - a major advantage for retrofit projects. Units can be stacked together into scalable battery banks, allowing the system to fit anything from a single-family home to a multi-family building - the series even offers a 208 V compliant configuration, a rarity among competitors. aPower also stands out for its **ability to start heavy loads**, such as air conditioners or heat pumps, even during a grid outage, while its rugged enclosure with high **weatherproof protection** allows for both indoor and outdoor installation. The system runs quietly and reliably across a wide temperature range, with the whole setup managed through a mobile app that combines self-consumption, time-of-use, and emergency backup modes. It's built for homeowners and multi-family property investors looking for a flexible, scalable, weather-resistant storage solution backed by a **long-term manufacturer warranty**.


## Questions


### Is the FranklinWH aPower series still available for purchase?

No, the aPower series has been discontinued and replaced by the newer aPower2 model. Buying new first-generation units is now essentially impossible, though FranklinWH continues to provide service and warranty support for units already installed. Anyone planning a new energy storage system should look at the currently available FranklinWH models with comparable or larger capacity.


### What warranty does FranklinWH offer on the aPower battery?

FranklinWH backed the aPower series with a long-term manufacturer warranty typical of premium LFP energy storage systems - in practice spanning more than a decade, measured in years or in a cumulative energy throughput limit (MWh), whichever comes first. The exact terms for a specific unit are listed in the purchase certificate and documentation provided by the installer.


### Do I need to replace my solar inverter to add an aPower battery?

No, that's one of this series' main advantages. aPower includes a built-in AC-coupled inverter, so it connects on the AC side of the system, in parallel with the existing solar inverter. This lets you add storage to almost any operating PV installation without a costly inverter swap, making retrofits on homes with existing solar much simpler.


### Can aPower start a heat pump or air conditioner during a grid outage?

Yes, aPower was designed to power heavy, high-surge loads like air conditioners and heat pumps even during a full grid outage. Its AC-coupled inverter can handle the high starting current these appliances draw, setting it apart from many cheaper storage systems built only to keep lights and small appliances running.


### Is one aPower module enough, or do I need to combine several units?

It depends on the building's energy needs. aPower modules combine into batteries of scalable capacity, so the system can grow from a small single-family home setup to a larger array serving a multi-family building. For multi-unit properties, the series also offers a 208V-compatible variant, a feature rarely found among competitors.


### Can the aPower energy storage unit be installed outdoors?

Yes, the aPower enclosure has high weatherproof resistance, allowing installation both indoors and outdoors - for example on a home's exterior wall or in an unheated garage. The battery runs stably across a wide temperature range, and its lithium iron phosphate (LFP) cells provide an extra margin of thermal safety compared to other lithium chemistries.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/apower-datasheet-05efa291f9db.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [sonnenBatterie hybrid 9.53/15](https://comparepv.com/battery/sonnen-sonnenbatterie-hybrid-9-53-15) | 13.5 kWh | 98.0% | 3.3 kW |  | +9.0 pp round-trip, -1.7 kW |
| [Tesla Powerwall 3](https://comparepv.com/battery/tesla-powerwall-3) | 13.5 kWh | 89.0% | 11.5 kW |  | +6.5 kW |
| [FENECON Home 20 (FHI-20-DAH)](https://comparepv.com/battery/fenecon-home-20-fhi-20-dah) | 14 kWh | 97.5% | 20.0 kW |  | +0.4 kWh, +8.5 pp round-trip, +15.0 kW |
| [FENECON Home 30 (FHI-29,9-DAH)](https://comparepv.com/battery/fenecon-home-30-fhi-29-9-dah) | 14 kWh | 97.5% | 29.9 kW |  | +0.4 kWh, +8.5 pp round-trip, +24.9 kW |
| [SENEC.Home P4 (4 battery modules)](https://comparepv.com/battery/senec-senec-home-p4-4-battery-modules) | 14.2 kWh |  | 11.8 kW |  | +0.6 kWh, +6.8 kW |
| [E3/DC S10 Xplus 14](https://comparepv.com/battery/e3-dc-s10-xplus-14) | 14.3 kWh | 95.0% | 7.5 kW |  | +0.7 kWh, +6.0 pp round-trip, +2.5 kW |
| [E3/DC S10 Xflex 14](https://comparepv.com/battery/e3-dc-s10-xflex-14) | 14.3 kWh |  | 15.0 kW |  | +0.7 kWh, +10.0 kW |
| [FranklinWH aPower S-10](https://comparepv.com/battery/franklinwh-apower-s-10) | 15 kWh | 90.5% | 11.5 kW |  | +1.4 kWh, +1.5 pp round-trip, +6.5 kW |


---

Source: https://comparepv.com/battery/franklinwh-apower-x

