---
title: "FoxESS EK6 Plus 5.18 kWh Battery: Specs & Datasheet | ComparePV"
description: "FoxESS EK6 Plus 5.18 kWh home battery. Specs: 95.0% round-trip efficiency, 5.8 kW continuous, 51.0 kg."
source: "https://comparepv.com/battery/foxess-ek6-plus"
updated: 2026-11-14
---

# FoxESS EK6 Plus


## Identity

- **Manufacturer:** FoxESS
- **Model:** EK6 Plus
- **Series:** EK6
- **Usable energy:** 5.18 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP


## How it compares

Compared against 190 batteries up to 6 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 95.0% | 95.0% | Typical | 27 |
| Power per kWh | 1.11 | 0.88 | Strong - top 16% | 24 |
| Cycle life | - | 6000 |  |  |
| Weight per kWh | 9.8 | 10.7 | Typical | 64 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 5.18 kWh
- **Nominal energy:** 5.76 kWh
- **Depth of discharge:** 90 %
- **Max system capacity:** 20.7 kWh
- **Units in parallel:** 4


### Power

- **Continuous discharge power:** 5.76 kW
- **Continuous charge power:** 5.76 kW
- **Peak discharge power:** 12.48 kW
- **Max discharge current:** 30 A
- **Max charge current:** 30 A
- **Peak discharge current:** 65 A


### Efficiency and lifetime

- **Round-trip efficiency:** 95.0 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 192.0 V
- **Operating voltage:** 174 to 219 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 640 × 380 × 185 mm
- **Weight:** 51.0 kg
- **Enclosure:** IP65
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Cooling:** passive
- **Operating temperature:** -10 to 55 °C


### Compatibility

- **Protocols:** CAN


### Warranty and certificates

- **Certifications:** IEC62619, EN IEC 61000-6-1/2/3/4, UN38.3, IP65


### Pros

- **Scalable up to 23 kWh** - A single EK6 module provides 5.76 kWh, and up to 4 units can be connected in parallel for a maximum of 23.04 kWh per inverter battery port. Installers can start with a minimal configuration and expand later when a heat pump or EV charger is added, without replacing the entire storage system.
- **High depth of discharge (90% DoD)** - Out of the 5.76 kWh nominal capacity, around 5.18 kWh is usable energy, corresponding to 90% DoD - a competitive figure versus many residential LFP systems, which often sit at 80-85%.
- **Prismatic LFP cells - safety and longevity** - LiFePO4 chemistry in a prismatic cell format is known for high thermal stability and resilience under intensive cycling, limiting degradation even with the deep, daily discharge patterns typical of PV-plus-heat-pump households.
- **High round-trip efficiency** - Round-trip efficiency of at least 95% (per the official EK6 Plus datasheet, V1.3, July 2026) means minimal energy losses during charge/discharge cycles, translating into better real-world self-consumption yield.
- **IP65 enclosure and flexible mounting** - The IP65 ingress protection rating allows installation both indoors and outdoors, while available floor- or wall-mounting options make it easier to fit space constraints in a utility room or garage.


### Cons

- **Extra HV junction box needed for multi-unit setups** - Running more than one EK6 module in parallel requires an additional FoxESS HV junction box, adding cost and installation complexity compared to systems with a native multi-unit bus and no extra components.
- **Coarse module capacity step** - The 5.76 kWh base module is a larger sizing increment than some competitors' 2.5-3.5 kWh modules, making it harder to precisely size capacity for small residential installations without oversizing the system.


## About this series

The EK6 series is a **high-voltage, modular energy storage system** designed for installations that need room to grow alongside a household's changing needs. Rather than locking owners into a fixed capacity, it lets additional units be connected in parallel, so a home can start small and scale up smoothly once a heat pump, an EV charger, or extra PV panels enter the picture. At the core of each unit sit **LiFePO4 (LFP)** prismatic cells, valued for their chemical stability and long service life, which supports safe operation even under frequent daily cycling. The **IP65-rated enclosure** allows mounting both indoors and outdoors, while the flexible installation method - floor-standing or wall-mounted - makes it easier to fit into the space constraints of a utility room or garage. EK6 also stands out for its **high depth of discharge**, letting homeowners actually use the energy they store instead of losing it to an unused safety margin. The series suits installers looking for a scalable, easy-to-service solution that holds up in demanding environments, as well as investors planning to expand their PV system over several years without replacing the entire storage setup.


## Questions


### How many EK6 modules can be connected in parallel and what total capacity can I get?

A single EK6 module has a rated capacity of 5.76 kWh, with about 5.18 kWh usable thanks to its high depth of discharge. The system supports up to 4 modules of the same type connected in parallel, giving roughly 23 kWh of total storage. This lets you scale the installation step by step as you add a heat pump or EV charger.


### What warranty does the FoxESS EK6 battery come with?

The manufacturer standardly covers the EK6 series with a 10-year warranty, typical for high-voltage LiFePO4 storage systems in this class. The exact terms, including guaranteed cycle count and product registration procedure, are detailed in a separate Fox ESS Battery Warranty Terms and Conditions document, available from your installer or distributor at purchase.


### Can the EK6 be installed outdoors?

Yes, the EK6 enclosure has an IP65 rating, meaning full protection against dust and resistance to water jets, so the module can be mounted outdoors, for example on a garage wall. The manufacturer also supports both floor-standing and wall-mounted installation, giving flexibility in boiler rooms, garages, or technical spaces with limited floor area.


### What operating voltage does the EK6 use and which inverters is it compatible with?

The EK6 module has a nominal voltage of around 192 V, with an operating range of roughly 174-219 V, classifying it as a high-voltage battery. This architecture requires a hybrid inverter matched to the battery's high DC voltage, typically from the same FoxESS product line, ensuring full BMS-to-inverter integration that scales as additional modules are added.


### How do the prismatic LFP cells in the EK6 differ from cylindrical cells used in other storage systems?

Prismatic LiFePO4 cells used in the EK6 have higher unit capacity than cylindrical cells, meaning fewer internal connections are needed, which improves chemical stability and reduces the risk of a single-cell failure affecting the pack. LFP chemistry is also inherently more thermally stable than, for example, NMC, resulting in safer operation under the frequent daily cycling typical of residential PV storage.


### How much does a single EK6 module weigh and does installation require special equipment?

A single EK6 module weighs about 51 kg, with dimensions around 380x640x185 mm, meaning installation typically requires two installers or a simple lifting aid rather than heavy lifting equipment. Its modular design plus support for wall or floor mounting make it easier to move the unit into a boiler room or garage without removing doors or walls.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/ENEK6DatasheetV1320260710-bb70efd58f91.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [FoxESS ECS2900-H2](https://comparepv.com/battery/fox-ess-ecs2900-h2) | 5.18 kWh | 95.0% |  | HV | Similar on paper |
| [FoxESS EP6 Plus](https://comparepv.com/battery/foxess-ep6-plus) | 5.18 kWh | 95.0% |  | HV | Similar on paper |
| [Power Battery 5.7](https://comparepv.com/battery/rct-power-power-battery-5-7) | 5.18 kWh |  | 5.8 kW | HV | Similar on paper |
| [Sigenergy SigenStor BAT 5.0](https://comparepv.com/battery/sigenergy-sigenstor-bat-5-0) | 5.2 kWh |  | 2.5 kW | HV | -3.3 kW |
| [BYD Battery-Box Premium HVS 5.1](https://comparepv.com/battery/byd-battery-box-premium-hvs-5-1) | 5.12 kWh | 96.0% | 5.1 kW | HV | +1.0 pp round-trip, -0.6 kW |
| [WeCo 5K0 PRO 1 Module](https://comparepv.com/battery/weco-5k0-pro-1-module) | 5.12 kWh |  | 2.5 kW | HV | -3.3 kW |
| [WeCo 5K0](https://comparepv.com/battery/weco-5k0) | 5.12 kWh |  | 2.5 kW | HV | -3.3 kW |
| [Sungrow SBS050](https://comparepv.com/battery/sungrow-sbs050) | 5.12 kWh |  | 5.1 kW | HV | -0.6 kW |


---

Source: https://comparepv.com/battery/foxess-ek6-plus

