---
title: "Fortress Power eSpire 306 305.5 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "Fortress Power eSpire 306 305.5 kWh all-in-one home battery. Specs: 95.5% round-trip efficiency, 10000 cycles, 2950.0 kg."
source: "https://comparepv.com/battery/fortress-power-espire-306"
updated: 2026-11-14
---

# Fortress Power eSpire 306


## Identity

- **Manufacturer:** Fortress Power
- **Model:** eSpire 306
- **Series:** eSpire
- **Usable energy:** 305.5 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 95.5% | 93.0% | Typical | 40 |
| Power per kWh | - | 0.52 |  |  |
| Cycle life | 10000 | 8000 | Strong - top 3% | 3 |
| Weight per kWh | 9.7 | 10.4 | Typical | 90 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 305.5 kWh
- **Nominal energy:** 305.50 kWh
- **Max system capacity:** 6110.0 kWh
- **Units in parallel:** 20


### Power

- **Max discharge current:** 153 A
- **Max charge current:** 153 A


### Efficiency and lifetime

- **Round-trip efficiency:** 95.5 %
- **Cycle life:** 10000 cycles
- **Capacity at end of life:** 70 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 998.4 V
- **Operating voltage:** 874 to 1123 V
- **Cell technology:** LFP
- **Cell count:** 52
- **Cell management:** Cobalt-free, Active balancing, Thermal management


### Built-in inverter

- **Inverter power:** 125.0 kW
- **Phases:** Three-phase


### Physical

- **Dimensions:** 2344 × 1390 × 1344 mm
- **Weight:** 2950.0 kg
- **Enclosure:** IP66 (module), IP56 (room)
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Cooling:** liquid
- **Noise:** 80 dB
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Protocols:** Modbus TCP, CAN, Modbus RTU, Ethernet, BACnet


### Warranty and certificates

- **Certifications:** UL1973, UL9540A, UL9540, NFPA 855, NFPA 68, NEMA 3R, IEC 62477, IEC 62619, IEC 62933-5-2, IEC 61000-6-2, IEC 61000-6-4, UN38.2


### Pros

- **LFP cells - thermal stability** - Prismatic lithium iron phosphate (LFP) cells, rather than NMC, provide higher resistance to thermal runaway and longer cycle life, a standard advantage in the C&I segment and still a meaningful edge over legacy NMC-based installations.
- **Liquid cooling as a segment differentiator** - Unlike many competing air-cooled C&I storage systems, eSpire uses liquid cooling, which stabilizes cell temperature under intensive cyclic duty (e.g., price arbitrage, peak shaving) and limits capacity degradation under high-load operation.
- **Modular scalability up to 3.5 MWh** - Units can be paralleled up to 3.5 MWh, allowing the same platform to serve both small commercial sites and large industrial plants without changing the system architecture.
- **Turnkey system - faster installation** - Factory integration of the inverter, HVAC, fire detection, and outdoor enclosure eliminates the need to field-assemble components from separate vendors, meaningfully reducing on-site installation time and cost compared to systems built from discrete, modularly sourced parts.
- **EMS with fleet management and multi-source integration** - The built-in energy management system (EMS), supporting PV, generators, wind turbines, and the grid within a single remotely monitored ecosystem, simplifies microgrid deployments without requiring additional third-party integration software.


### Cons

- **Added complexity of the cooling system** - Liquid cooling improves thermal stability but introduces additional components (pumps, coolant loop, leak sensors) that simpler air-cooled C&I storage systems do not have, implying higher maintenance requirements and potentially higher lifecycle service costs.
- **Limited operational track record** - The eSpire series launched in 2022, so compared with tier-1 platforms with a longer market history (e.g., since 2015-2018), there is less independently verified long-term field data on actual degradation and durability under years of industrial duty cycles.


## About this series

The **eSpire 290 FC** series is a complete, industrial-grade C&I energy storage solution designed for businesses that want to meaningfully cut energy costs and gain independence from the grid. At its core are prismatic lithium iron phosphate (LFP) cells, valued for their thermal stability and long service life, overseen by a **multi-level BMS** that keeps the system safe and balanced. What sets eSpire apart from the competition is its **advanced liquid cooling**, which significantly improves battery thermal stability and extends its service life even under heavy cycling. The system offers **intelligent microgrid EMS** with fleet management, integrating solar PV, generators, wind turbines, or the utility grid into one remotely monitored ecosystem. Thanks to its **modular scalability**, the installation can be expanded up to 3.5 MWh by paralleling multiple units, making it flexible for both smaller sites and large industrial facilities. It is a **turnkey system** - factory-integrated with the inverter, HVAC, fire detection, and an outdoor-rated enclosure, which drastically shortens on-site installation time. Ideal applications include demand charge reduction, time-of-use arbitrage, reactive power compensation, and backup power in off-grid operation.


## Questions


### What warranty comes with the Fortress Power eSpire 290 FC energy storage system?

The eSpire series carries one of the longest warranties in the C&I segment - Fortress Power offers up to 16 years of coverage on the LFP cells and key system components. This extended warranty period is enabled by the thermal stability of the prismatic LFP cells and the advanced liquid cooling system, which limit capacity degradation even under heavy cyclic duty typical of industrial installations.


### How does the eSpire 290 FC differ from standard air-cooled battery storage systems?

The key difference is the liquid cooling system used in the eSpire 290 FC instead of conventional air cooling. This design delivers more uniform temperature distribution across the cell pack, resulting in longer battery life, reduced capacity degradation, and more stable performance under the high cyclic loads common in commercial and industrial applications.


### How much can an eSpire 290 FC-based installation be scaled up?

Thanks to its modular architecture, individual eSpire 290 FC units can be connected in parallel, scaling the system up to 3.5 MWh of capacity. This allows the solution to be tailored to both smaller commercial sites and large industrial plants, with expansion possible in stages by adding more units as a company's energy needs grow.


### Does the eSpire 290 FC require a separate inverter and outdoor enclosure?

No, the eSpire 290 FC is a turnkey system, factory-integrated with an inverter, climate control, fire detection, and an outdoor-rated enclosure. This all-in-one configuration eliminates the need to source additional components separately and significantly shortens on-site installation time compared to systems assembled from individual parts.


### What does the intelligent microgrid management (EMS) in the eSpire 290 FC provide?

The built-in EMS on the eSpire 290 FC allows businesses to manage a fleet of energy assets - solar PV, generators, wind turbines, and the utility grid - from a single, remotely monitored dashboard. This enables automatic optimization of energy flows, peak demand charge reduction, and price arbitrage without manually switching between power sources.


### Is the eSpire 290 FC suitable for backup power in island mode during grid outages?

Yes, the eSpire 290 FC is also designed for emergency island-mode operation. Its prismatic LFP cells combined with a multi-level BMS ensure safe, stable power delivery to critical loads even during a complete grid outage, which is essential for manufacturing facilities that require continuous operation.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/fortress-power-espire-306-data-sheet-433a728980aa.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Fortress Power eSpire 290 FC](https://comparepv.com/battery/fortress-power-espire-290-fc) | 289.3 kWh | 92.5% | 128.0 kW | HV | -16.2 kWh, -3.0 pp round-trip |
| [WeCo 16K0 HV 273.2 kWh](https://comparepv.com/battery/weco-16k0-hv-273-2-kwh) | 273.2 kWh |  |  | HV | -32.3 kWh |
| [Growatt AXE 88~286H-2HS-S1](https://comparepv.com/battery/growatt-axe-88-286h-2hs-s1) | 271.7 kWh |  |  | HV | -33.8 kWh |
| [Cegasa eBick HV x20](https://comparepv.com/battery/cegasa-ebick-hv-x20) | 269 kWh | 96.0% | 134.0 kW | HV | -36.5 kWh, +0.5 pp round-trip |
| [Fortress Power 90kW PCS / 266kWh (480VAC, 2P13S)](https://comparepv.com/battery/fortress-power-90kw-pcs-266kwh-480vac-2p13s) | 266 kWh |  | 90.0 kW | HV | -39.5 kWh |
| [GoodWe GW125/261-ESA-LCN-G10](https://comparepv.com/battery/goodwe-gw125-261-esa-lcn-g10) | 261.25 kWh | 92.0% | 125.0 kW | HV | -44.2 kWh, -3.5 pp round-trip |
| [GoodWe GW125/261-ESA-LCN-G11](https://comparepv.com/battery/goodwe-gw125-261-esa-lcn-g11) | 261.25 kWh | 92.0% | 125.0 kW | HV | -44.2 kWh, -3.5 pp round-trip |
| [GoodWe GW261.2-BAT-LCD-G10](https://comparepv.com/battery/goodwe-gw261-2-bat-lcd-g10) | 261.2 kWh | 93.0% | 137.5 kW | HV | -44.3 kWh, -2.5 pp round-trip |


---

Source: https://comparepv.com/battery/fortress-power-espire-306

