---
title: "FelicityESS FLH-E257 231.5 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "FelicityESS FLH-E257 231.5 kWh all-in-one home battery. Specs: 8000 cycles, 2780.0 kg, 10 yrs warranty."
source: "https://comparepv.com/battery/felicityess-flh-e257"
updated: 2026-11-14
---

# FelicityESS FLH-E257


## Identity

- **Manufacturer:** FelicityESS
- **Model:** FLH-E257
- **Series:** FLH-E Energy Storage System
- **Usable energy:** 231.5 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 93.0% |  |  |
| Power per kWh | - | 0.52 |  |  |
| Cycle life | 8000 | 8000 | Typical | 10 |
| Weight per kWh | 12.0 | 10.4 | Typical | 164 |
| Warranty | 10 yrs | 10 yrs | Typical | 6 |


## Specification


### Capacity

- **Usable energy:** 231.5 kWh
- **Nominal energy:** 257.22 kWh
- **Depth of discharge:** 90 %
- **Module energy:** 16.07 kWh
- **Max system capacity:** 257.1 kWh
- **Units in parallel:** 12


### Power

- **Max discharge current:** 240 A
- **Max charge current:** 240 A


### Efficiency and lifetime

- **Cycle life:** 8000 cycles
- **Capacity at end of life:** 70 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 819.2 V
- **Operating voltage:** 742 to 922 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Built-in inverter

- **Inverter power:** 125.0 kW
- **Phases:** Three-phase
- **MPPT trackers:** 10


### Physical

- **Dimensions:** 2400 × 1350 × 1300 mm
- **Weight:** 2780.0 kg
- **Enclosure:** IP55
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Cooling:** active-air
- **Operating temperature:** -20 to 55 °C


### Compatibility

- **Protocols:** RS485, CAN


### Warranty and certificates

- **Warranty:** 10 years
- **Warranted cycles:** 8000 cycles
- **Certifications:** UN38.3, CE, IEC62619, IEC63056, IEC62477


### Pros

- **DC-coupled architecture with hybrid inverter** - Coupling the battery directly on the DC side with the PV array and hybrid inverter reduces AC-DC-AC conversion losses and supports grid-tied, off-grid, and generator-backed operation within a single system - a configuration less commonly found as standard in competing C&I ESS requiring separate AC coupling.
- **Factory pre-assembled ESS cabinet** - Delivered as a ready-to-install cabinet-type unit (e.g., FLH-E60/FLH-E257), it eliminates on-site manual assembly of battery modules, cutting commissioning time by several days compared to rack-mount solutions requiring full field integration.
- **LFP chemistry rated at ≥8,000 cycles** - For the FLH-E series (FLH-E257 model, 257.22 kWh), the manufacturer declares a minimum of 8,000 cycles at 25°C/0.5P to 70% end-of-life capacity, plus a 10-year product warranty - parameters in line with tier-1 LFP cells typically used in C&I ESS.
- **Modular scalability up to hundreds of kWh** - Units can be paralleled - the lineup spans from roughly 61.44 kWh (FLH-E60) up to 257+ kWh per cabinet, with multi-cabinet configurations scaling to around 720 kWh, allowing capacity to grow with rising enterprise energy demand without replacing the whole system.
- **IP65-rated enclosure for outdoor deployment** - IP65 protection and corrosion-resistant construction allow the cabinet to be installed outdoors (e.g., next to production halls), reducing the need for a dedicated technical room and lowering CAPEX associated with building or adapting a facility.


### Cons

- **Inconsistent public technical documentation** - Publicly available specs for the FLH-E60 model differ across sources (e.g., nominal voltage listed as 614.4 V in one source vs. 576 V in another) - the lack of a single, authoritative manufacturer datasheet for the full series makes it harder for integrators to verify parameters reliably before system design.
- **Shorter track record in large-scale C&I ESS** - Felicity Solar has operated since 2007, but as a supplier of industrial-scale C&I energy storage it has a notably shorter history of reference deployments than segment leaders (e.g., BYD, CATL-based ESS), which may mean fewer long-term case studies confirming the claimed 8,000+ cycle lifespan under real-world operating conditions.


## About this series

The FelicityESS FLH-E series is an industrial-grade C&I energy storage system built for businesses and facilities that want to meaningfully cut electricity costs and protect themselves against power interruptions. The defining feature of this line is its **DC-coupled architecture**, which allows the storage unit to be flexibly paired with a PV array and hybrid inverter, supporting grid-tied operation as well as off-grid and generator-integrated modes. The system ships as a **fully pre-assembled cabinet**, which considerably simplifies installation and shortens commissioning time compared to solutions that require manual module assembly on-site. Built on **LFP (LiFePO4) cells**, the FLH-E series delivers a high level of operational safety and long service life, translating into a lower levelized cost of energy (LCOE) over the system's lifetime. Another key strength is its **modular scalability** - individual units can be connected in parallel or expanded with additional battery cabinets, letting the storage capacity grow alongside a company's rising energy needs. An **enclosure engineered for outdoor durability**, featuring a high ingress protection rating and corrosion resistance, makes outdoor installation straightforward, for example next to production facilities or data centers. It's a solid choice for integrators and investors seeking a reliable, easy-to-service storage system for peak shaving, load shifting, and maximizing solar self-consumption.


## Questions


### How does the DC-coupled architecture in FelicityESS FLH-E differ from typical AC-coupled storage systems?

In the DC-coupled architecture, the FLH-E storage system connects directly to the PV array on the DC side, ahead of the hybrid inverter, so solar energy reaches the battery with lower conversion losses than in AC-coupled systems. This design also simplifies off-grid operation and compatibility with a generator set, which matters for businesses looking to secure production against grid outages.


### Can the FLH-E storage system be installed outdoors, for example next to a production hall?

Yes, the FLH-E cabinet has an enclosure with enhanced resistance to outdoor conditions, including a high ingress protection rating and anti-corrosion protection, allowing outdoor installation without an additional shelter or container. This design is especially useful near production halls, data centers, or industrial sites where indoor space is limited.


### How does capacity expansion work as a company's energy needs grow with the FLH-E?

The FLH-E series has a modular design, allowing additional battery cabinets to be connected in parallel to increase storage capacity without replacing the entire system. A company can start with a smaller configuration and add more units later as energy demand or peak shaving requirements grow, which reduces upfront capital investment.


### Why does FelicityESS FLH-E use LFP cells instead of, say, NMC?

LFP (LiFePO4) chemistry is more thermally and chemically stable than NMC, resulting in a higher level of operational safety, lower overheating risk, and longer cycle life. For C&I industrial installations, this translates into a lower LCOE (levelized cost of energy) over the system's lifetime and reduced operational risk during daily peak shaving duty cycles.


### How long does it take to install and commission the FLH-E compared to classic modular systems?

The FLH-E is delivered as a factory-assembled, ready-to-install cabinet, so on-site work only involves electrical and communication connections, without manually stacking individual battery modules. In practice, this can shorten commissioning time by several days compared with systems that require on-site module assembly, which matters for projects on tight schedules.


### What business applications is the FLH-E energy storage system best suited for?

The FLH-E is primarily designed for peak shaving, shifting energy consumption to lower-tariff hours, and maximizing self-consumption of solar PV energy. Thanks to off-grid operation and generator compatibility, the system also ensures continuity of power for critical production processes during grid outages.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/FLH-E257_Datasheet_-_English-e180dbe458f8.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [FelicityESS FLH48314UG1MN (16 Modules)](https://comparepv.com/battery/felicityess-flh48314ug1mn-16-modules) | 231.49 kWh |  |  | HV | Similar on paper |
| [KSTAR BC240DE2A](https://comparepv.com/battery/kstar-bc240de2a) | 229.1 kWh |  |  | HV | -2.4 kWh |
| [Sungrow ST225kWh-110kW-2h](https://comparepv.com/battery/sungrow-st225kwh-110kw-2h) | 229 kWh |  | 110.0 kW | HV | -2.5 kWh |
| [Livoltek BES-P125X261E](https://comparepv.com/battery/livoltek-bes-p125x261e) | 235 kWh | 90.0% | 125.0 kW | HV | +3.5 kWh |
| [Livoltek BES-P125X261U](https://comparepv.com/battery/livoltek-bes-p125x261u) | 235 kWh | 90.0% | 125.0 kW | HV | +3.5 kWh |
| [SolaX TS-HS2400](https://comparepv.com/battery/solax-ts-hs2400) | 228 kWh |  | 120.0 kW | HV | -3.5 kWh |
| [BSLBATT S314-14](https://comparepv.com/battery/bslbatt-s314-14) | 225.08 kWh |  |  | HV | -6.4 kWh |
| [Luxpower C16 14S](https://comparepv.com/battery/luxpower-c16-14s) | 225.06 kWh |  |  | HV | -6.4 kWh |


---

Source: https://comparepv.com/battery/felicityess-flh-e257

