---
title: "Dyness DH200F-C260P124-S4 261 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "Dyness DH200F-C260P124-S4 261 kWh all-in-one home battery. Specs: 88.0% round-trip efficiency, 124.9 kW continuous, 2900.0 kg."
source: "https://comparepv.com/battery/dyness-dh200f-c260p124-s4"
updated: 2026-11-14
---

# Dyness DH200F-C260P124-S4


## Identity

- **Manufacturer:** Dyness
- **Model:** DH200F-C260P124-S4
- **Series:** DH200F-C260
- **Usable energy:** 261 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP
- **Built-in inverter:** yes


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 88.0% | 93.0% | Weak - bottom 2% | 120 |
| Power per kWh | 0.48 | 0.52 | Typical | 163 |
| Cycle life | - | 8000 |  |  |
| Weight per kWh | 11.1 | 10.4 | Typical | 148 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 261 kWh
- **Nominal energy:** 261.00 kWh
- **Max system capacity:** 2610.0 kWh
- **Units in parallel:** 10


### Power

- **Continuous discharge power:** 124.90 kW
- **Max discharge current:** 157 A
- **Max charge current:** 157 A
- **Peak discharge current:** 180 A


### Efficiency and lifetime

- **Round-trip efficiency:** 88.0 %


### Cells and voltage

- **Voltage class:** High voltage
- **Operating voltage:** 754 to 936 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free, Thermal management


### Built-in inverter

- **Inverter power:** 125.0 kW
- **Phases:** Three-phase
- **MPPT trackers:** 4
- **Backup power:** 125.0 kW


### Physical

- **Dimensions:** 2200 × 2000 × 1345 mm
- **Weight:** 2900.0 kg
- **Enclosure:** IP55
- **Mounting:** ground
- **Outdoor installation:** Yes
- **Cooling:** active-air
- **Noise:** 75 dB
- **Operating temperature:** -20 to 50 °C


### Compatibility

- **Protocols:** Ethernet, 4G, RS485, CAN


### Warranty and certificates

- **Certifications:** UN38.3, EN IEC 61000-6-2, EN IEC 61000-6-4, IEC 62619, IEC 63056, EN 62477-1, IEC 62933-5-2, UL 9540A, EN 50549-1/-2/-10, C10/11, G99, G100, TOR, EIFS, TF3.3.1, UNE-217001/217002, NRS-097, VDE-AR-N4105/4110/4120, (EU) 2023/1542


### Pros

- **DC coupling reduces conversion losses** - Integrating PV, LFP battery and inverter in a single enclosure with DC-coupled architecture eliminates the extra AC/DC conversion stage typical of AC-coupled systems, improving overall system efficiency and lowering the LCOE of stored energy.
- **High power and energy density per unit** - A single DH200F-C260 container delivers roughly 261 kWh nominal capacity and 250 kW / 125 kW rated power, with up to 10 units running in AC parallel for scalability up to approximately 2.61 MWh without changing the base architecture.
- **Three-level fire protection** - The system combines multi-sensor detection (CO, temperature, smoke), aerosol and water-based suppression, and explosion-proof ventilation - a higher standard than the single-layer detection found in many comparable containerized ESS of this power class.
- **Fast emergency power switchover** - A switchover time below 20 ms ensures near-uninterrupted power to critical loads during grid outages, which matters for commercial and industrial customers requiring high availability.
- **Flexible grid-tied and off-grid architecture** - Support for dedicated switchgear cabinets - GCC-AC for grid-tied operation and SCC-AC for island mode - allows the system to be configured as either grid-support on-grid or standalone off-grid without changing the base unit.


### Cons

- **Limited public technical documentation** - Unlike the standard DH200F model (215 kWh), the C260 variant (261 kWh) lacks a publicly available full datasheet covering voltage range, efficiency and dimensions - this data must be confirmed directly with the manufacturer or distributor, lengthening the quoting process.
- **Shorter market track record** - Dyness was founded in 2017, and the C260 series launched in 2023, giving it a shorter track record in large containerized storage compared to tier-1 manufacturers like CATL, BYD or Sungrow, which have years of references in C&I installations.


## About this series

The **DH200F-C260** series is an all-in-one outdoor PV+ESS cabinet that integrates an LFP-cell based battery storage system, inverter, and photovoltaic inputs within a single enclosure. Its **DC-coupled PV** architecture reduces conversion losses and lowers overall system costs compared to AC-coupled alternatives, directly improving the LCOE of stored energy. Designed for **flexible expansion**, the series can be combined through a GCC-AC combiner cabinet for grid-tied operation and an SCC-AC switching cabinet for off-grid support, making it scalable from a single site to larger commercial and industrial installations. Safety is ensured by **triple-level fire protection**, combining multi-sensor detection, aerosol and water fire suppression, and explosion-proof ventilation. An additional advantage is **backup switchover in under 20 ms**, guaranteeing uninterrupted operation of critical loads during grid outages. The system supports PV, diesel generators, on/off-grid operation, and EV chargers simultaneously, while smart management with real-time monitoring and OTA updates simplifies remote operation. This solution is aimed at installers and commercial site operators seeking a compact, safe, and easily scalable energy storage cabinet.


## Questions


### How does the Dyness DH200F-C260 battery differ from AC-coupled energy storage systems?

The DH200F-C260 integrates an LFP battery, inverter, and PV inputs into a single enclosure using DC coupling with the solar array. This means energy from the panels skips the extra AC/DC conversion stage required by AC-coupled systems, reducing conversion losses and component costs. In practice, this results in a lower levelized cost of storage (LCOE) and a simpler overall installation.


### How many DH200F-C260 units can be combined in a single installation?

The series is built for flexible modular expansion. Multiple units can be paralleled using the GCC-AC combiner cabinet for grid-tied operation or the SCC-AC cabinet for island (off-grid) mode. This allows the system to scale from a single enclosure for a small site up to larger commercial and industrial installations without changing the underlying architecture.


### What fire protection does the DH200F-C260 have?

The system uses three-tier fire protection: multi-sensor detection (smoke, temperature, gas), automatic aerosol and water-based suppression, and explosion-proof ventilation that vents gases in case of a cell failure. This layered approach is standard for commercial-grade containerized LFP storage and is intended to limit the risk of thermal incidents spreading.


### Will the DH200F-C260 provide backup power during a grid outage?

Yes, the system switches to battery backup in under 20 milliseconds, fast enough that most loads, including servers and sensitive electronics, won't notice the interruption. With support for on-grid, off-grid, and generator operation, the series suits facilities that require continuous power, such as manufacturing plants or data centers.


### Is the DH200F-C260 compatible with EV chargers and generators?

Yes, the system is designed to simultaneously support PV input, a backup generator, and EV chargers within a single energy architecture. This multi-functionality lets commercial site operators charge EV fleets using stored and solar energy while reducing grid purchases during peak-rate hours.


### How is remote management and servicing handled on the DH200F-C260?

The DH200F-C260 includes smart management with real-time monitoring of battery, inverter, and safety parameters, plus OTA firmware updates. This lets installers and facility operators diagnose system status remotely without a site visit, and deploy fixes or new features without taking the system offline.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/DynessDH200FC260DatasheetEN20260703V14-edd640177805.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Dyness BF200-C260](https://comparepv.com/battery/dyness-bf200-c260) | 261 kWh | 94.0% |  | HV | +6.0 pp round-trip |
| [Dyness DH200Y-C260](https://comparepv.com/battery/dyness-dh200y-c260) | 261 kWh | 90.0% | 125.0 kW | HV | +2.0 pp round-trip |
| [SAJ CM2-99.9K-261-EU](https://comparepv.com/battery/saj-cm2-99-9k-261-eu) | 261 kWh | 90.0% | 99.9 kW | HV | +2.0 pp round-trip, -25.0 kW |
| [SAJ CM2-125K-261-EU](https://comparepv.com/battery/saj-cm2-125k-261-eu) | 261 kWh | 90.0% | 125.0 kW | HV | +2.0 pp round-trip |
| [Dyness DH200F-C260P124-S0](https://comparepv.com/battery/dyness-dh200f-c260p124-s0) | 261 kWh | 88.0% | 124.9 kW | HV | Similar on paper |
| [Dyness DH200F-C260P125-S0](https://comparepv.com/battery/dyness-dh200f-c260p125-s0) | 261 kWh | 88.0% | 125.0 kW | HV | Similar on paper |
| [Dyness DH200F-C260P125-S4](https://comparepv.com/battery/dyness-dh200f-c260p125-s4) | 261 kWh | 88.0% | 125.0 kW | HV | Similar on paper |
| [Jinko Solar ACB-261](https://comparepv.com/battery/jinko-solar-acb-261) | 261 kWh |  | 135.0 kW | HV | +10.1 kW |


---

Source: https://comparepv.com/battery/dyness-dh200f-c260p124-s4

