---
title: "Dyness BF200-C240 241 kWh Battery: Specs & Datasheet | ComparePV"
description: "Dyness BF200-C240 241 kWh home battery. Specs: 94.0% round-trip efficiency, 2500.0 kg."
source: "https://comparepv.com/battery/dyness-bf200-c240"
updated: 2026-11-14
---

# Dyness BF200-C240


## Identity

- **Manufacturer:** Dyness
- **Model:** BF200-C240
- **Series:** BF200
- **Usable energy:** 241 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 94.0% | 93.0% | Typical | 54 |
| Power per kWh | - | 0.52 |  |  |
| Cycle life | - | 8000 |  |  |
| Weight per kWh | 10.4 | 10.4 | Typical | 122 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 241 kWh
- **Nominal energy:** 241.00 kWh


### Power

- **Max discharge current:** 157 A
- **Max charge current:** 157 A
- **Peak discharge current:** 180 A


### Efficiency and lifetime

- **Round-trip efficiency:** 94.0 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 768.0 V
- **Operating voltage:** 696 to 864 V
- **Cell technology:** LFP
- **Cell count:** 314
- **Cell management:** Cobalt-free, Thermal management


### Physical

- **Dimensions:** 2200 × 1320 × 1345 mm
- **Weight:** 2500.0 kg
- **Enclosure:** IP55
- **Mounting:** floor
- **Outdoor installation:** Yes
- **Cooling:** active-air
- **Noise:** 75 dB
- **Operating temperature:** -20 to 50 °C


### Compatibility

- **Protocols:** Ethernet, 4G, RS485, Bluetooth, CAN


### Warranty and certificates

- **Certifications:** EN IEC 61000-6-2:2019, EN IEC 61000-6-4:2019, UN38.3, IEC 62619, IEC 63056, IEC 62477-1, EN 62477-1


### Pros

- **Modular scalability up to 2.15 MWh** - BF200 units can be DC-coupled in up to 10 cabinets, allowing capacity to scale from a single unit (around 215 kWh) up to a 2.15 MWh energy block without changing the underlying system architecture.
- **IP55 rating for outdoor deployment** - The IP55 ingress protection combined with air cooling allows outdoor installation without an additional climate-controlled enclosure, reducing containerization costs compared to competing systems that require full HVAC enclosures.
- **Rated 8,000+ cycle lifespan** - The manufacturer specifies over 8,000 cycles for the LFP cells, which at one cycle per day corresponds to more than 20 years of operation - a figure on par with segment-leading LFP C&I solutions.
- **Universal mounting and inverter compatibility** - A single-cluster bidirectional output and standard side brackets allow BF200 to integrate with third-party inverters (e.g. paired with Megarevo in reference configurations) without custom mounting hardware, shortening integration time for system integrators.
- **Multi-layer fire protection** - Aerosol detection, water-based suppression, multi-sensor monitoring, and explosion-proof ventilation provide several independent protection layers, meeting the stringent safety standards typically required in commercial and industrial projects.


### Cons

- **Requires an external AC inverter** - BF200 is a battery-only DC cabinet with no integrated PCS - delivering AC output requires a separate third-party hybrid inverter (e.g. Megarevo), adding system complexity and extra components to service compared to the manufacturer's own all-in-one DH200F line.
- **Inconsistent capacity figures across documentation** - Official and regional pages list different capacities for the BF200 series (215 kWh for the base variant vs. 241-261 kWh for the C240/C260 variants), making direct offer comparisons difficult without confirming the exact model number with the manufacturer.
- **Shorter manufacturer track record** - Founded in 2017, Dyness has a shorter commercial history than LFP giants like CATL or BYD, which for large C&I projects may mean a smaller base of long-term reference installations when assessing supplier risk.


## About this series

The BF200 series is an outdoor, air-cooled LFP (LiFePO4) battery cabinet built for commercial and industrial installations where configuration flexibility and easy deployment matter most. Thanks to multi-unit DC paralleling, the system eliminates rigid capacity thresholds, letting operators scale storage gradually from a single cabinet up to extended energy blocks while supporting **long-duration energy storage (2-12h)**. Its key advantage is a **universal fit design** featuring a single-cluster dual-output layout with standard side brackets, meaning compatibility with most mainstream third-party inverters without the need for custom mounting hardware. The BF200 also addresses the needs of noise-sensitive sites - optional noise reduction modules make it a fitting choice for business parks, industrial parks, and commercial complexes located near residential areas. Safety is handled through **multi-level fire protection** covering aerosol detection, a water-based fire suppression system, multi-sensor monitoring, and explosion-proof ventilation. The package is rounded out by **smart management with OTA updates**, enabling remote monitoring of operating status and servicing without an on-site visit. This makes it a solid fit for integrators and investors looking for an energy storage solution that's easy to install, safe, and ready to perform in demanding outdoor conditions.


## Questions


### What backup duration does the Dyness BF200 series provide?

The BF200 series is designed for long-duration energy storage, covering a range of 2 to 12 hours of operation. This range allows the configuration to be tailored to site needs - from peak shaving to covering overnight demand. Thanks to its modular design and the ability to connect multiple DC units, runtime can be flexibly increased as the installation scales.


### Is the BF200 compatible with inverters from manufacturers other than Dyness?

Yes, the BF200 uses a universal mounting design with a single-cluster bidirectional output and standard side brackets. This makes the system compatible with most popular third-party inverters without the need to design dedicated mounting adapters, greatly simplifying integration into existing commercial installations.


### What fire protection is built into the Dyness BF200 battery cabinets?

The BF200 features a multi-level fire safety system including aerosol detection, a water-based suppression installation, multi-sensor monitoring of temperature and gases, and explosion-proof ventilation to release excess pressure. This layered redundancy meets the safety requirements expected in commercial and industrial installations where facility safety is a priority.


### Can the BF200 energy storage system be installed near residential areas?

Yes, the BF200 offers optional noise-reduction modules, making it suitable for business parks, industrial sites, and commercial complexes adjacent to residential neighborhoods. This makes it a practical choice for acoustically sensitive locations, where standard, louder battery cabinets could trigger complaints or run into local noise regulations.


### How do you scale storage capacity with the BF200 series?

The BF200 system allows multiple units to be connected on the DC side, eliminating the rigid capacity thresholds typical of single battery cabinets. An investor can start with one unit and gradually expand the installation into larger energy blocks as site demand grows, without having to replace the entire system.


### Can the BF200 be monitored and managed remotely without an on-site service visit?

Yes, the BF200 is equipped with intelligent management software supporting OTA (over-the-air) updates. This enables remote monitoring of operating parameters, fault diagnostics, and firmware upgrades from a distance, reducing service costs and response times for technical teams, especially in geographically distributed installations.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/DynessBF200C260DatasheetEN20260521V17-d01d08612ae0.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Huawei LUNA2000-241-2S1](https://comparepv.com/battery/huawei-luna2000-241-2s1) | 241 kWh | 91.3% | 108.0 kW | HV | -2.7 pp round-trip |
| [FoxESS GM241kWh-50kW-H](https://comparepv.com/battery/foxess-gm241kwh-50kw-h) | 241 kWh | 89.5% | 50.0 kW | HV | -4.5 pp round-trip |
| [FoxESS GM241kWh-60kW-H](https://comparepv.com/battery/foxess-gm241kwh-60kw-h) | 241 kWh | 89.5% | 60.0 kW | HV | -4.5 pp round-trip |
| [FoxESS GM241kWh-80kW-H](https://comparepv.com/battery/foxess-gm241kwh-80kw-h) | 241 kWh | 89.5% | 80.0 kW | HV | -4.5 pp round-trip |
| [FoxESS GM241kWh-100kW-H](https://comparepv.com/battery/foxess-gm241kwh-100kw-h) | 241 kWh | 89.5% | 100.0 kW | HV | -4.5 pp round-trip |
| [FoxESS GM241kWh-125kW-H](https://comparepv.com/battery/foxess-gm241kwh-125kw-h) | 241 kWh | 89.5% | 125.0 kW | HV | -4.5 pp round-trip |
| [FoxESS TM241kWh50kW-H](https://comparepv.com/battery/foxess-tm241kwh50kw-h) | 241 kWh | 89.5% | 50.0 kW | HV | -4.5 pp round-trip |
| [FoxESS TM241kWh60kW-H](https://comparepv.com/battery/foxess-tm241kwh60kw-h) | 241 kWh | 89.5% | 60.0 kW | HV | -4.5 pp round-trip |


---

Source: https://comparepv.com/battery/dyness-bf200-c240

