---
title: "Cegasa eSCAL 6 x5 29 kWh Battery: Specs & Datasheet | ComparePV"
description: "Cegasa eSCAL 6 x5 29 kWh home battery. Specs: 98.0% round-trip efficiency, 14.0 kW continuous, 280.0 kg."
source: "https://comparepv.com/battery/cegasa-escal-6-x5"
updated: 2026-11-14
---

# Cegasa eSCAL 6 x5


## Identity

- **Manufacturer:** Cegasa
- **Model:** eSCAL 6 x5
- **Series:** eSCAL 6
- **Usable energy:** 29 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP


## How it compares

Compared against 305 batteries from 20 to 50 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 98.0% | 95.0% | Strong - top 8% | 1 |
| Power per kWh | 0.48 | 0.55 | Weak - bottom 21% | 169 |
| Cycle life | - | 6000 |  |  |
| Weight per kWh | 9.7 | 10.1 | Typical | 93 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 29 kWh
- **Modules per stack:** 3 to 15
- **Max system capacity:** 116.0 kWh
- **Units in parallel:** 4


### Power

- **Continuous discharge power:** 14.00 kW
- **Max discharge current:** 63 A
- **Peak discharge current:** 100 A


### Efficiency and lifetime

- **Round-trip efficiency:** 98.0 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 288.0 V
- **Operating voltage:** 260 to 313 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 1230 × 706 × 375 mm
- **Weight:** 280.0 kg
- **Enclosure:** IP55
- **Mounting:** floor
- **Operating temperature:** -5 to 45 °C


### Compatibility

- **Protocols:** CAN, Modbus TCP/IP


### Warranty and certificates

- **Certifications:** CE, IEC62619, IEC62620, EN61000-6-2, EN61000-6-3, UN38.1


### Pros

- **Wide scalability 17-345 kWh** - The system can be expanded from a single string (3-15 modules of 5.76 kWh each) up to 4 parallel strings and a maximum of 60 modules, yielding a 17-345 kWh range within one architecture - a flexibility rarely matched in the C&I ESS segment.
- **LFP chemistry for high longevity** - Lithium Iron Phosphate (LFP) cells provide significantly better thermal stability and longer cycle life than older NMC chemistries, which is particularly valuable under intensive commercial and industrial duty cycles.
- **Tool-free plug & play installation** - The integrated precharge circuit and built-in disconnect switch, combined with a tool-free plug & play mounting concept, meaningfully reduce commissioning time and lower the risk of wiring errors compared with systems requiring manual module interconnection.
- **IP55 enclosure and broad communication support** - The IP55-rated enclosure allows both indoor and outdoor installation in harsher conditions, while CAN and Modbus TCP/IP protocol support ensures compatibility with most inverters on the market, including confirmed integration with Victron Energy systems.


### Cons

- **Limited operating temperature range** - The declared operating range of -5°C to 45°C is narrower than some competing C&I systems (down to -20°C), which may limit outdoor deployment in colder climates without additional enclosure heating.
- **Rebranding may complicate certificate verification** - The eSCAL 6 series is a renamed continuation of the earlier E/Scal HV model (per Victron Energy), meaning some certificates and documentation may still reference the older designation - integrators should verify this before finalizing service agreements.


## About this series

Cegasa eSCAL 6 is a modular energy storage system built for commercial and industrial sites, where installation flexibility matters just as much as safety. Each module relies on LFP (lithium iron phosphate) chemistry, delivering high chemical stability and long cell lifespan even under demanding duty cycles. The series stands out for its **modular design and scalable capacity** - the system can be expanded from a handful of modules up to a multi-string configuration, letting integrators match storage size to actual PV demand instead of overpaying for oversized capacity from day one. Installation is simplified by a **plug & play concept requiring no extra tools**, cutting setup time and reducing the risk of commissioning errors. Thanks to its **integrated precharge and circuit breaker system** and an IP55-rated enclosure, eSCAL 6 suits both indoor and outdoor deployments in harsher environments. Another key advantage is its **broad communication protocol support (CAN, Modbus TCP/IP)**, ensuring compatibility with most inverters on the market. It is a fit for integrators and investors looking for a storage platform that grows alongside the project - from smaller commercial installations to large industrial systems - without needing to replace the entire architecture.


## Questions


### What is the capacity of a single Cegasa eSCAL 6 module, and how is the system expanded?

Each eSCAL 6 module has a nominal voltage of around 57.6 V and a capacity of about 5.76 kWh (roughly 100 Ah), built on LFP cells. The system scales by adding more modules to a single string or by paralleling multiple strings - a typical configuration uses 13-15 modules per string, yielding about 75-86 kWh and 676-940 V. This lets installations scale from small commercial sites to large industrial systems without changing the overall architecture.


### Which inverters are compatible with the Cegasa eSCAL 6 battery?

eSCAL 6 supports CAN and Modbus TCP/IP communication protocols, allowing it to integrate with most hybrid and storage inverters on the market, including Victron units such as the HS19 (650-1000 V DC range). Before purchasing, it's worth checking the specific inverter model against the manufacturer's or distributor's compatibility list, since matching string voltage and communication protocol directly affects correct BMS operation.


### Can the eSCAL 6 be installed outdoors?

Yes, the eSCAL 6 enclosure has an IP55 protection rating, meaning full dust protection and resistance to water jets from any direction. This allows the storage system to be installed both inside technical rooms and outdoors, for example in containers or on the facades of industrial facilities, in more demanding weather conditions. For outdoor installations, it's still advisable to add shading from direct sunlight to limit temperature swings affecting the cells.


### What is the integrated precharge system in the eSCAL 6, and why does it matter?

Precharge gradually charges the inverter's input capacitors before the battery is fully connected, limiting the surge current during system startup. In the eSCAL 6 this function is integrated together with the circuit breaker, removing the need for extra external protection components and shortening commissioning time. For installers, this means fewer parts to design around and lower risk of error when starting up a multi-string installation.


### How quickly can the eSCAL 6 be installed thanks to its plug & play design?

Thanks to its modular plug & play construction, eSCAL 6 modules connect without any additional tools, which in practice allows a single string to be assembled in a few hours instead of the days needed for conventional systems requiring dedicated wiring tools. This shortens project delivery time and reduces the risk of installation errors, which matters especially on larger multi-string projects completed under tight deadlines.


### How does the eSCAL 6 differ from Cegasa's earlier E/Scal HV series?

The eSCAL 6 is a continuation and renaming of the E/Scal HV series - the modular design, LFP chemistry, and key electrical parameters remain consistent, though older certificates and documentation may still reference the previous E/Scal HV name. For investors and integrators, this means service support and compatibility with existing E/Scal HV installations are preserved, while the eSCAL 6 name applies to the manufacturer's current commercial and technical documentation.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/cegasa-tds-escal-6-en-vnov25-ee8a7c63b876.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Axitec AXIstorage Li SV3 29.1 kWh](https://comparepv.com/battery/axitec-axistorage-li-sv3-29-1-kwh) | 29.1 kWh | 96.0% |  | HV | +0.1 kWh, -2.0 pp round-trip |
| [GoodWe LX F28.8-H-20](https://comparepv.com/battery/goodwe-lx-f28-8-h-20) | 28.8 kWh |  | 20.2 kW | HV | -0.2 kWh, +6.2 kW |
| [FoxESS EQ4800-L7](https://comparepv.com/battery/foxess-eq4800-l7) | 29.35 kWh | 95.0% |  | HV | +0.4 kWh, -3.0 pp round-trip |
| [SMA Storage M 28.7](https://comparepv.com/battery/sma-solar-sma-storage-m-28-7) | 28.65 kWh | 93.5% |  | HV | -0.4 kWh, -4.5 pp round-trip |
| [Fortress Power HV-BAT-29.4P1M6](https://comparepv.com/battery/fortress-power-hv-bat-29-4p1m6) | 29.4 kWh |  | 14.4 kW | HV | +0.4 kWh, +0.4 kW |
| [FoxESS EQ5500-L6](https://comparepv.com/battery/foxess-eq5500-l6) | 29.48 kWh | 95.0% |  | HV | +0.5 kWh, -3.0 pp round-trip |
| [Sofar Solar PowerAll 30](https://comparepv.com/battery/sofar-solar-powerall-30) | 28.5 kWh |  | 15.0 kW | HV | -0.5 kWh, +1.0 kW |
| [Luxpower PSTACK 30kWh](https://comparepv.com/battery/luxpower-pstack-30kwh) | 28.5 kWh |  | 21.3 kW | HV | -0.5 kWh, +7.3 kW |


---

Source: https://comparepv.com/battery/cegasa-escal-6-x5

