---
title: "Cegasa eBick HV x20 269 kWh Battery: Specs & Datasheet | ComparePV"
description: "Cegasa eBick HV x20 269 kWh home battery. Specs: 96.0% round-trip efficiency, 134.0 kW continuous, 1828.0 kg."
source: "https://comparepv.com/battery/cegasa-ebick-hv-x20"
updated: 2026-11-14
---

# Cegasa eBick HV x20


## Identity

- **Manufacturer:** Cegasa
- **Model:** eBick HV x20
- **Series:** eBick HV
- **Usable energy:** 269 kWh
- **Voltage class:** High voltage
- **Cell technology:** LFP


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | 96.0% | 93.0% | Typical | 24 |
| Power per kWh | 0.50 | 0.52 | Typical | 148 |
| Cycle life | - | 8000 |  |  |
| Weight per kWh | 6.8 | 10.4 | Strong - top 2% | 6 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 269 kWh
- **Nominal energy:** 269.00 kWh
- **Module energy:** 13.33 kWh
- **Modules per stack:** 3 to 20
- **Max system capacity:** 266.6 kWh
- **Units in parallel:** 8


### Power

- **Continuous discharge power:** 134.00 kW
- **Continuous charge power:** 134.00 kW
- **Max discharge current:** 175 A
- **Max charge current:** 175 A
- **Peak discharge current:** 280 A


### Efficiency and lifetime

- **Round-trip efficiency:** 96.0 %


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 960.0 V
- **Operating voltage:** 780 to 1040 V
- **Cell technology:** LFP
- **Cell management:** Cobalt-free


### Physical

- **Dimensions:** 2075 × 4020 × 405 mm
- **Weight:** 1828.0 kg
- **Enclosure:** IP30
- **Mounting:** floor
- **Operating temperature:** -5 to 45 °C


### Compatibility

- **Protocols:** CAN, Modbus TCP/IP (Sunspec)


### Warranty and certificates

- **Certifications:** CE, IEC62619, IEC62620, EN61000-6-2, EN61000-6-3, UN38.3


### Pros

- **Scalability from kW to MWh** - The modular design of the eBick HV allows the system to grow from a single rack to multi-string configurations reaching several megawatt-hours without changing the underlying architecture, limiting re-engineering costs as a project expands.
- **LFP chemistry - safety and durability** - Lithium iron phosphate (LFP) cells offer higher thermal stability and better cycling endurance than NMC chemistries, which for commercial applications with frequent charge-discharge cycles translates into lower degradation risk and reduced thermal-incident exposure.
- **Plug & Play installation** - Modules connect without specialized tools, shortening deployment time for system integrators and reducing labor costs when commissioning multi-string HV installations.
- **Integrated BMS with circuit breaker** - The BMS includes pre-charge functionality and a dedicated circuit breaker, giving full control over each string's operation - a key feature for synchronizing multiple units within a single large commercial installation.
- **Compatibility with industrial HV inverters** - Support for up to 1000 Vdc and high compatibility with industrial inverters lets the eBick HV serve both on-grid and off-grid projects - from self-consumption to peak shaving to EV charging - without needing extra voltage adapters.


### Cons

- **Limited brand recognition in the C&I segment** - Compared to dominant commercial/industrial ESS suppliers (e.g., CATL, BYD, Huawei), Cegasa holds a much smaller market share and fewer publicly documented large-scale deployments, making it harder for integrators to assess long-term reliability through a proven track record.
- **Key specifications not publicly disclosed** - Manufacturer and distributor materials lack clear figures for cycle life, round-trip efficiency, and warranty length specific to the eBick HV line, limiting direct comparison against competing HV systems (e.g., Sungrow, Huawei LUNA2000-HV) where such data is standard public information.


## About this series

The Cegasa eBick HV series is a high-voltage energy storage system built for commercial and industrial installations where scalability and ease of expansion matter most. Its defining feature is a **modular design** that lets you build anything from a single rack to multi-string configurations reaching several megawatt-hours, without having to rework the architecture as demand grows. The system is built on lithium iron phosphate (LFP) cells, valued for their thermal stability and long service life, which translates into **maximum safety** even under demanding cycling conditions. Installation is streamlined through a **Plug & Play** approach - modules connect without specialized tools, cutting deployment time and lowering integration costs for installers. An integrated BMS with precharge function and circuit breaker gives full control over each string's operation, while advanced management enables optimal synchronization of multiple units within a single installation. Thanks to its **high compatibility with industrial high-voltage inverters** and support for voltages up to 1000 Vdc, the eBick HV works equally well in on-grid and off-grid projects - from self-consumption in manufacturing plants, through peak shaving, to EV charging stations and backup power. It's a solution built for system integrators and commercial investors seeking European manufacturing quality alongside the flexibility to scale a project as the business grows.


## Questions


### How does the Cegasa eBick HV battery storage scale as an installation grows?

The eBick HV uses a modular design, letting a system start from a single rack and expand with additional strings up to multi-megawatt-hour configurations. Scaling up does not require replacing the existing architecture or previously installed modules - new units are simply added to the same installation. This makes it well suited to manufacturing facilities planning to increase their energy demand over time.


### Which industrial inverters is the eBick HV compatible with?

The system supports voltages up to 1000 Vdc, giving it high compatibility with industrial high-voltage inverters used in both on-grid and off-grid installations. This operating voltage range lets integrators select inverters from different manufacturers without extra voltage conversion equipment, simplifying the design of commercial and industrial systems.


### Are the LFP cells in the eBick HV safe under heavy cycling conditions?

Yes, the eBick HV is built on lithium iron phosphate (LFP) cells, known for high thermal stability and resistance to degradation even under frequent, deep charge-discharge cycles. This chemistry is favored in commercial deployments precisely for its operational safety and longer service life compared with other lithium-ion chemistries.


### What does the Plug & Play concept mean for the eBick HV and how does installation work?

Plug & Play means the battery modules are connected without specialized tools - standard connections built into the system design are enough. This shortens on-site deployment time and lowers integration costs for installers, since no dedicated crew training on proprietary mounting hardware is required.


### What does the BMS in the eBick HV do, and does it protect the strings from damage?

The integrated BMS monitors each string independently, using a precharge function along with a circuit breaker that cuts power if an abnormality is detected. Advanced control also synchronizes multiple units within a single installation, preventing uneven wear across strings and extending the overall system's service life.


### What applications is the eBick HV suited for beyond solar self-consumption?

The eBick HV fits a broad range of commercial and industrial applications: self-consumption of solar energy in manufacturing plants, peak shaving to reduce demand-charge costs, powering EV charging stations, and backup power for facilities requiring uninterrupted operation. It works in both on-grid and off-grid installations.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/cegasa-tds-ebick-hv-en-202410-2b8587e5d425.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Growatt AXE 88~286H-2HS-S1](https://comparepv.com/battery/growatt-axe-88-286h-2hs-s1) | 271.7 kWh |  |  | HV | +2.7 kWh |
| [Fortress Power 90kW PCS / 266kWh (480VAC, 2P13S)](https://comparepv.com/battery/fortress-power-90kw-pcs-266kwh-480vac-2p13s) | 266 kWh |  | 90.0 kW | HV | -3.0 kWh, -44.0 kW |
| [WeCo 16K0 HV 273.2 kWh](https://comparepv.com/battery/weco-16k0-hv-273-2-kwh) | 273.2 kWh |  |  | HV | +4.2 kWh |
| [GoodWe GW125/261-ESA-LCN-G10](https://comparepv.com/battery/goodwe-gw125-261-esa-lcn-g10) | 261.25 kWh | 92.0% | 125.0 kW | HV | -7.8 kWh, -4.0 pp round-trip, -9.0 kW |
| [GoodWe GW125/261-ESA-LCN-G11](https://comparepv.com/battery/goodwe-gw125-261-esa-lcn-g11) | 261.25 kWh | 92.0% | 125.0 kW | HV | -7.8 kWh, -4.0 pp round-trip, -9.0 kW |
| [GoodWe GW261.2-BAT-LCD-G10](https://comparepv.com/battery/goodwe-gw261-2-bat-lcd-g10) | 261.2 kWh | 93.0% | 137.5 kW | HV | -7.8 kWh, -3.0 pp round-trip, +3.5 kW |
| [Alpha ESS STORION-LC-TB125](https://comparepv.com/battery/alpha-ess-storion-lc-tb125) | 261.2 kWh |  | 130.6 kW | HV | -7.8 kWh, -3.4 kW |
| [Dyness BF200-C260](https://comparepv.com/battery/dyness-bf200-c260) | 261 kWh | 94.0% |  | HV | -8.0 kWh, -2.0 pp round-trip |


---

Source: https://comparepv.com/battery/cegasa-ebick-hv-x20

