---
title: "BSLBATT HV PACK8 62.4 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "BSLBATT HV PACK8 62.4 kWh all-in-one home battery. Specs: 6000 cycles, 617.0 kg."
source: "https://comparepv.com/battery/bslbatt-hv-pack8"
updated: 2026-11-14
---

# BSLBATT HV PACK8


## Identity

- **Manufacturer:** BSLBATT
- **Model:** HV PACK8
- **Series:** ESS-GRID DyniO Series
- **Usable energy:** 62.4 kWh
- **Voltage class:** High voltage
- **Built-in inverter:** yes


## How it compares

Compared against 315 batteries of 50 kWh and up. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 93.0% |  |  |
| Power per kWh | - | 0.52 |  |  |
| Cycle life | 6000 | 8000 | Weak - bottom 22% | 98 |
| Weight per kWh | 9.9 | 10.4 | Typical | 96 |
| Warranty | - | 10 yrs |  |  |


## Specification


### Capacity

- **Usable energy:** 62.4 kWh
- **Nominal energy:** 62.40 kWh
- **Module energy:** 7.80 kWh
- **Max system capacity:** 187.2 kWh
- **Units in parallel:** 3


### Power

- **Max discharge current:** 68 A


### Efficiency and lifetime

- **Cycle life:** 6000 cycles


### Cells and voltage

- **Voltage class:** High voltage
- **Nominal voltage:** 460.8 V
- **Operating voltage:** 410 to 511 V
- **Cell management:** Thermal management


### Built-in inverter

- **Inverter power:** 30.0 kW
- **Phases:** Three-phase
- **MPPT trackers:** 2
- **Backup power:** 30.0 kW


### Physical

- **Dimensions:** 1795 × 590 × 713 mm
- **Weight:** 617.0 kg
- **Enclosure:** IP20
- **Mounting:** rack
- **Cooling:** active-air
- **Operating temperature:** -30 to 60 °C


### Compatibility

- **Protocols:** RS485, CAN


### Warranty and certificates

- **Warranted cycles:** 6000 cycles
- **Certifications:** IEC61000, EN50549, IEC62619, NRS, CE, UN38.3, IEC62040, IEC62477


### Pros

- **All-in-one integration** - DyniO combines a three-phase hybrid inverter, BMS, and high-voltage LFP modules in a single factory-tested enclosure. This removes the need to source and wire separate components from different vendors, shortening installation time for typical C&I projects and reducing configuration-error risk compared to systems built from discrete parts.
- **Modular scalability, 15-93 kWh** - A single unit offers 30 kW / 62-93 kWh (depending on the manufacturer source), and up to three units can be paralleled to reach roughly 90 kW and ~280 kWh. This lets the platform scale flexibly for small-to-medium commercial customers without changing the underlying hardware.
- **Sub-5 ms grid-to-island transfer** - Switchover between grid-parallel and off-grid operation takes under 5 ms, notably faster than the typical 10-20 ms seen in many competing hybrid ESS units, which matters for critical loads such as server rooms or production lines.
- **150% overload with genset hybrid support** - A 150% overload rating plus native hybrid operation with diesel generators simplifies handling large motor starting loads and islanded microgrids on farms or industrial sites, where comparable ESS products without genset support typically require extra hardware.
- **High efficiency and wide temperature range** - Conversion efficiency up to 97.8% with forced-air cooling and an operating range of -30°C to 60°C enables stable operation in harsh climates without additional containerized air conditioning.


### Cons

- **No UL9540A certification** - Available documentation lists only IEC62619, CE, and UN38.3 - no confirmed UL9540A/UL1973, which is a standard requirement for C&I projects in the US market among tier-1 competitors (e.g., Tesla, BYD, Sungrow). This limits US market entry without additional testing.
- **Short market track record (since 2024)** - The series launched in 2024, so it lacks the multi-year field operating data that comparable tier-1 ESS products have accumulated over 5-10+ years, which can translate into higher perceived technical risk for institutional investors.
- **Modest per-unit capacity** - Single-unit capacity (62-93 kWh) is modest compared to large C&I storage competitors like Sungrow PowerTitan or Tesla Megapack, rated in the hundreds of kWh to MWh per unit - larger projects require stacking multiple DyniO units and a larger installation footprint.


## About this series

The ESS-GRID DyniO Series is a complete energy storage system packed into a single, compact enclosure, integrating a three-phase hybrid inverter, battery management system (BMS), and high-voltage lithium iron phosphate (LiFePO4) modules. Rather than sourcing and combining separate components from multiple vendors, installers get a factory-tested, ready-to-deploy **all-in-one** solution that cuts installation time and reduces the risk of configuration errors. DyniO stands out for its **modular scalability** - power and capacity can be matched to the project's needs across a 15 to 30 kW range per unit, with up to three units connected in parallel to scale both output and capacity. The system delivers **seamless switching between grid-tied and off-grid operation** in under 5 milliseconds, which matters when powering critical loads. Another key advantage is **hybrid operation support with diesel or gas generators**, combined with a 150% overload capability that handles large motor startups and sudden load spikes with ease. With remote monitoring and energy management built in, the series is well suited for industrial and commercial sites, farms, island microgrids, and any application where power reliability and simple maintenance are top priorities.


## Questions


### What power output and capacity can you get from one ESS-GRID DyniO unit, and when units are paralleled?

A single DyniO unit delivers 15 to 30 kW of power paired with matching LiFePO4 battery capacity, which in practice means a range of 62-93 kWh. Up to three units can be connected in parallel, proportionally increasing both power and storage capacity, allowing the system to scale from single commercial sites to larger industrial installations without changing the overall architecture.


### How fast does DyniO switch from grid-tied to island mode during a power outage?

The DyniO system switches between on-grid and off-grid operation in under 5 milliseconds, which is practically imperceptible to connected loads. This is critical for powering critical infrastructure - server rooms, cold storage, or production lines - where even a momentary voltage drop could cause downtime or equipment damage.


### Can DyniO run in hybrid mode alongside a diesel or gas generator?

Yes, the DyniO series supports hybrid operation with generators, which is useful at sites lacking a stable grid connection or in off-grid locations. The system also withstands overloads of up to 150%, making it easier to handle large motor starting currents and sudden load spikes typical of industrial facilities.


### What operating temperature range does the ESS-GRID DyniO energy storage system support?

DyniO is designed to operate across a wide ambient temperature range, from -30°C to 60°C, thanks to forced-air cooling. This range allows the system to be installed in both cold climates and hot industrial zones without requiring additional air conditioning in the technical room.


### What cycle life does the DyniO battery offer, and does that translate into real operating cost savings?

The LiFePO4 modules used in DyniO are rated for up to 6,000 cycles at 90% depth of discharge. In practice, this means many years of daily charge and discharge cycles without significant capacity loss, resulting in a lower levelized cost of storage over the system's lifetime compared to NMC-based alternatives.


### Does installing and servicing ESS-GRID DyniO require specialized expertise, or is it a plug-and-play solution?

DyniO combines a hybrid inverter, BMS, and batteries in a single, factory-tested enclosure, so installers don't need to source and match components from different manufacturers. Communication runs over standard CAN and RS485 protocols, and remote monitoring simplifies diagnostics and service, often without requiring an on-site visit, reducing installation time and configuration errors.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/ESS-GRID-DyniO-Series-250218-b296b54d675a.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [TESVOLT TAYTAN/10-40](https://comparepv.com/battery/tesvolt-taytan-10-40) | 62.5 kWh |  | 62.5 kW | HV | +0.1 kWh |
| [GivEnergy GIV-SME-30/69-ID](https://comparepv.com/battery/givenergy-giv-sme-30-69-id) | 62.21 kWh |  | 30.0 kW | HV | -0.2 kWh |
| [FoxESS CQ7-L10](https://comparepv.com/battery/foxess-cq7-l10) | 62.64 kWh | 95.0% | 46.1 kW | HV | +0.2 kWh |
| [Cegasa eSCAL 6 x11](https://comparepv.com/battery/cegasa-escal-6-x11) | 63 kWh | 98.0% | 32.0 kW | HV | +0.6 kWh |
| [Fortress Power FP-Nano-S12](https://comparepv.com/battery/fortress-power-fp-nano-s12) | 61.44 kWh | 97.8% |  | HV | -1.0 kWh |
| [FelicityESS FLH48100UG2-12](https://comparepv.com/battery/felicityess-flh48100ug2-12) | 61.44 kWh |  | 61.4 kW | HV | -1.0 kWh |
| [Deye GE-F60-EU](https://comparepv.com/battery/ge-f60-eu) | 61.4 kWh | 91.0% | 50.0 kW | HV | -1.0 kWh |
| [WeCo 5K0 PRO 3 Clusters (Master + Cluster 2)](https://comparepv.com/battery/weco-5k0-pro-3-clusters-master-cluster-2) | 61.4 kWh |  | 30.0 kW | HV | -1.0 kWh |


---

Source: https://comparepv.com/battery/bslbatt-hv-pack8

