---
title: "Afore AF10000W-LX 9.73 kWh All-in-One Battery: Specs & Datasheet | ComparePV"
description: "Afore AF10000W-LX 9.73 kWh all-in-one home battery. Specs: 95.0 kg, 10 yrs warranty."
source: "https://comparepv.com/battery/afore-af10000w-lx"
updated: 2026-11-14
---

# Afore AF10000W-LX


## Identity

- **Manufacturer:** Afore
- **Model:** AF10000W-LX
- **Series:** Afore ASL Series
- **Usable energy:** 9.73 kWh
- **Voltage class:** Low voltage
- **Built-in inverter:** yes


## How it compares

Compared against 210 batteries from 6 to 12 kWh. Ranks are within that class.


| Measure | This battery | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| Round-trip efficiency | - | 95.0% |  |  |
| Power per kWh | - | 0.67 |  |  |
| Cycle life | - | 6000 |  |  |
| Weight per kWh | 9.8 | 12.1 | Strong - top 23% | 42 |
| Warranty | 10 yrs | 10 yrs | Typical | 13 |


## Specification


### Capacity

- **Usable energy:** 9.73 kWh
- **Nominal energy:** 10.24 kWh
- **Depth of discharge:** 95 %
- **Module energy:** 5.12 kWh
- **Modules per stack:** 1 to 6
- **Max system capacity:** 30.7 kWh


### Power

- **Max discharge current:** 100 A
- **Max charge current:** 100 A


### Cells and voltage

- **Voltage class:** Low voltage
- **Nominal voltage:** 51.2 V
- **Operating voltage:** 45 to 58 V


### Built-in inverter

- **Inverter power:** 6.0 kW
- **Phases:** Single-phase
- **MPPT trackers:** 2
- **Backup power:** 6.0 kW


### Physical

- **Dimensions:** 680 × 600 × 215 mm
- **Weight:** 95.0 kg
- **Enclosure:** IP66
- **Mounting:** wall
- **Outdoor installation:** Yes
- **Cooling:** passive
- **Operating temperature:** -15 to 50 °C


### Compatibility

- **Protocols:** LCD, LED, RS485, CAN, Wi-Fi, GPRS, 4G


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** NRS097, G98/G99, EN50549-1, C10/C11, AS4777.2, VDE-AR-N4105, VDE0126, IEC62109-1, IEC62109-2, EN61000-6-2, EN61000-6-3, IEC62619, IEC63056, IEC61000-6-1, IEC62477-1, IEC60730, IEC62040, UN38.3, MSDS


### Pros

- **All-in-one design cuts install time** - The inverter, battery charger, UPS-class switch, and battery enclosure are factory pre-wired into a single unit, which the manufacturer states can cut wall-mounted installation time by up to 50% compared to systems assembled from separate components. For installers this means fewer cable connections and lower risk of on-site wiring errors.
- **Modular, scalable LFP capacity** - The lithium iron phosphate (LFP) battery design allows additional packs to be added without replacing the whole system, letting capacity be matched to a household's growing energy needs and spreading out the investment over time.
- **IP66 enclosure - indoor and outdoor install** - The IP66 ingress protection rating allows installation outside dedicated technical rooms or garages, unlike many competing indoor-only home battery systems, giving installers more siting flexibility in space-constrained homes.
- **150% overload in backup mode** - Emergency backup power with up to 150% overload for 10 seconds supports high-inrush loads (e.g., pumps, compressors) starting without issue, a meaningful functional advantage for powering critical home loads during grid outages.
- **VPP and RSD ready** - The series supports virtual power plant (VPP) integration and rapid shutdown (RSD), opening a path to future energy aggregation programs while meeting rooftop installation safety requirements in effect across many European markets.


### Cons

- **Limited brand recognition outside China** - Afore (founded in 2010, headquartered in China) has lower brand recognition in European markets than segment leaders in home storage (BYD, Huawei, LG), which for buyers can mean harder access to local service networks, installer references, and long-term field track record compared with more established Tier-1 manufacturers.
- **All-in-one integration limits modular servicing** - Full integration of the inverter, charger, and UPS-class switch into a single factory pre-wired unit shortens installation but means a fault in one component (e.g., switching electronics) may require servicing the entire unit rather than swapping only the failed part, unlike systems with a split, modular architecture.


## About this series

The Afore ASL Series is a complete, integrated all-in-one energy storage solution that houses the inverter, battery charger, UPS-level switching, and battery enclosure within a single, factory pre-wired unit. This design cuts wall-mounted installation time by up to half compared with systems assembled from separate components, making the ASL series an attractive choice for installers looking to save time and reduce on-site wiring errors. Its **modular, scalable design** lets homeowners match the lithium iron phosphate battery capacity to their actual needs simply by adding extra packs, without replacing the whole system. The **IP66-rated enclosure** allows mounting both indoors and outdoors regardless of weather conditions, setting ASL apart from many storage units limited to garages or utility rooms. The system delivers **150% backup overload capability for 10 seconds**, so it can comfortably start high-inrush appliances during an outage. It is also **VPP ready and RSD compliant**, opening the door to virtual power plant participation while meeting rooftop safety requirements. This makes it a solid fit for single-family homes where easy installation, flexible expansion, and dependable backup power matter most.


## Questions


### How does the Afore ASL battery storage differ from systems built from separate components?

The Afore ASL is an all-in-one design - the inverter, battery charger, UPS-class switch, and battery enclosure are factory-integrated and pre-wired into a single unit. In practice, installers don't need to connect and configure separate devices from different manufacturers, which cuts wall-mounted installation time by up to half and reduces the risk of wiring errors compared with modular systems assembled from third-party components.


### Can the Afore ASL storage unit be installed outdoors?

Yes. The ASL enclosure has an IP66 rating, meaning it's fully protected against dust and powerful water jets from any direction. This allows the system to be safely mounted on an exterior wall of a house, garage, or utility building without needing a separate canopy. This sets the ASL apart from many battery storage units that manufacturers recommend installing only indoors.


### How can the battery capacity of the Afore ASL be expanded later?

The ASL series has a modular design - additional LiFePO4 (lithium iron phosphate) capacity is added by connecting extra battery packs to the existing unit, without replacing the whole system or touching the already-installed inverter. This is convenient for households planning to gradually increase their energy consumption, for example after adding a heat pump or an electric vehicle.


### Can the Afore ASL handle appliances with high starting currents during a power outage?

Yes, the system provides emergency backup power with up to 150% overload capacity for 10 seconds. That margin is enough to start appliances with high inrush current, such as submersible pumps, compressors, or heat pumps, which draw significantly more power at startup than during continuous operation.


### What does it mean that the Afore ASL is VPP- and RSD-ready?

VPP (Virtual Power Plant) readiness lets the storage unit join a virtual power plant, allowing a grid operator to flexibly manage energy fed in or drawn, which can bring additional financial benefits to the owner in the future. RSD (Rapid Shutdown) is a safety requirement for rooftop installations - it allows voltage to be cut quickly in case of fire or rescue operations, increasingly mandated by local regulations.


### Who is the Afore ASL battery storage series designed for?

The ASL is aimed primarily at single-family homeowners and installers who value fast installation and simple servicing. Its integrated, factory pre-wired design minimizes points of failure, while modular capacity expansion lets the system scale from a small household to one with higher energy consumption, without needing to replace the entire installation down the line.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/batteries/Afore-Battery-single-phase-all-in-one-solution-40b35fcfb339.pdf)


## Alternatives


| Battery | Usable energy | Round-trip | Power | Voltage | Difference |
| --- | --- | --- | --- | --- | --- |
| [Dyness Powerbox G3](https://comparepv.com/battery/dyness-powerbox-g3) | 9.73 kWh |  | 10.2 kW | LV | Similar on paper |
| [FelicityESS FLS48100SG2 (2 Modules)](https://comparepv.com/battery/felicityess-fls48100sg2-2-modules) | 9.73 kWh |  | 6.1 kW | LV | Similar on paper |
| [FoxESS EQ5500-L2](https://comparepv.com/battery/foxess-eq5500-l2) | 9.83 kWh | 95.0% |  | LV | Similar on paper |
| [HomeGrid LV Stack'd Series x2](https://comparepv.com/battery/homegrid-lv-stack-d-series-x2) | 9.6 kWh | 98.0% | 8.6 kW | LV | -0.1 kWh |
| [Alpha ESS SMILE-G3-BAT-10.1P](https://comparepv.com/battery/alpha-ess-smile-g3-bat-10-1p) | 9.6 kWh |  | 5.0 kW | LV | -0.1 kWh |
| [Livoltek HomCellar-9.6kWh-B1](https://comparepv.com/battery/livoltek-homcellar-9-6kwh-b1) | 9.6 kWh |  | 10.0 kW | LV | -0.1 kWh |
| [Deye RW-G10.6](https://comparepv.com/battery/deye-rw-g10-6) | 9.58 kWh | 90.0% |  | LV | -0.2 kWh |
| [FoxESS EQ5000-P-L2](https://comparepv.com/battery/foxess-eq5000-p-l2) | 9.94 kWh | 95.0% | 4.5 kW | LV | +0.2 kWh |


---

Source: https://comparepv.com/battery/afore-af10000w-lx

